Energy Use and Environmental Impact of New Residential Buildings

The objective of this thesis is to investigate the energy use and environmental impact of residential buildings. Seven authentic buildings built in the 1990s in Sweden are investigated. They are analysed according to energy use and environmental impact during their life cycle: manufacture of building materials, transport of building materials and components to the building site, erection to a building, occupancy, maintenance and renovation, and finally demolition and removal of debris. Results show that approx. 85 % of the total estimated energy use during the life cycle is used during the occupation phase. The energy used to manufacture building and installation materials constitutes approx. 15 % of the total energy use. 70-90 % of the total environmental impact arises during the occupation phase, while the manufacture of construction and installation materials constitutes 10-20 %. In conclusion, the energy use and environmental impact during the occupation phase make up a majority of the total. At the end of the thesis, a tool is presented which helps designers and clients predict the energy use during the occupation phase for a future multi-family building before any constructional or installation drawings are made. In this way, different thermal properties may be elaborated in order to receive an energy-efficient and environmentally adapted dwelling.

[1]  Pierre Desprairies,et al.  World Energy Outlook , 1977 .

[2]  Karin Adalberth.  Energy Use in Multi-Family Dwellings during their Life Cycle , 1999 .

[3]  Claes Bankvall.  Heat transfer in insulation and insulated structure , 1972 .

[4]  T. Blomberg.  Heat conduction in two and three dimensions : computer modelling of building physics applications , 1996 .

[5]  Anne-Marie Tillman,et al.  LCA of building frame structures : environmetal impact over the life cycle of wooden and concrete frames , 1997 .

[6]  Lars-Erik Harderup.  Concrete slab on the ground and moisture control : verification of some methods to improve the moisture conditions in the foundation , 1991 .

[7]  Gudni Jóhannesson.  Active heat capacity : models and parameters for the thermal performance of buildings , 1981 .

[8]  Karin Adalberth.  Bygga - Bruka - Riva : Energianvändning i småhus ur ett kretsloppsperspektiv , 1995 .

[9]  Lars-Gunnar Lindfors,et al.  On the nordic guidelines for life cycle assessment , 1996 .

[10]  Richard F. Gunst,et al.  Applied Regression Analysis , 1999, Technometrics.

[11]  Regeringen och Regeringskansliet.  Svenska miljömål. Miljöpolitik för ett hållbart Sverige , 1998 .

[12]  Maria Suner.  Life Cycle Assessment of Aluminium, Copper and Steel , 1996 .

[13]  Claes Bankvall,et al.  Natural convective heat transfer in insulated structures , 1972 .

[14]  K. Adalberth,et al.  Energy use during the life cycle of buildings: a method , 1997 .

[15]  Raymond J. Cole,et al.  Life-cycle energy use in office buildings , 1996 .

[16]  Anne-Marie Tillman,et al.  LCA of building frame structures. Environmental impact over the life cycle of concrete and steel frames , 1996 .