Far-Field Prediction Using Only Magnetic Near-Field Scanning for EMI Test

Far-field prediction for electromagnetic interference (EMI) testing is achieved using only magnetic near-field on a Huygens's surface. The electrical field on the Huygens's surface is calculated from the magnetic near-field using the finite element method (FEM). Two examples are used to verify the proposed method. The first example uses the field radiated by an infinitesimal electric dipole. The calculated results are compared with the analytical solution. In the second example, the calculated results are compared with full-wave simulation results for the radiation of a print circuit board (PCB). The validity of this method when the near-field is high-impedance field is verified as well. Sensitivity of the far field to noise in both magnitude and phase in the near-field data is also investigated. The results indicate that the proposed method is very robust to the random variation of both. The effect of using only four sides of the Huygens's box is investigated as well, revealing that, in some instances, the incomplete Huygens's box can be used to predict the far field well. The proposed method is validated using near-field measurement data taken from a sleeve dipole antenna. The error for the maximum far-field value is in only 1.3 dB.

[1]  A. Yaghjian An overview of near-field antenna measurements , 1986 .

[2]  Yang Liu,et al.  Calculation of time-domain near-field Ex, y, z(t) from Hx, y(t) with PWS and FFT transforms , 2012, International Symposium on Electromagnetic Compatibility - EMC EUROPE.

[3]  D. Pommerenke,et al.  Heat-Sink Modeling and Design With Dipole Moments Representing IC Excitation , 2013, IEEE Transactions on Electromagnetic Compatibility.

[4]  T. Eibert,et al.  Fully Probe-Corrected Near-Field Far-Field Transformation Employing Plane Wave Expansion and Diagonal Translation Operators , 2008, IEEE Transactions on Antennas and Propagation.

[5]  K. Slattery,et al.  Using near-field scanning to predict radiated fields , 2004, 2004 International Symposium on Electromagnetic Compatibility (IEEE Cat. No.04CH37559).

[6]  T. Sarkar,et al.  Planar near-field to far-field transformation using an equivalent magnetic current approach , 1992 .

[7]  Schloss Premstaetten,et al.  Near Field Measurements to Predict the Electromagnetic Emission of Integrated Circuits , 2005 .

[8]  C. Balanis Advanced Engineering Electromagnetics , 1989 .

[9]  B. Mazari,et al.  Modeling Magnetic Radiations of Electronic Circuits Using Near-Field Scanning Method , 2007, IEEE Transactions on Electromagnetic Compatibility.

[10]  F. Las-Heras,et al.  Reconstruction of Equivalent Currents Distribution Over Arbitrary Three-Dimensional Surfaces Based on Integral Equation Algorithms , 2007, IEEE Transactions on Antennas and Propagation.

[11]  Miguel Rodriguez,et al.  On the Use of the Source Reconstruction Method for Estimating Radiated EMI in Electronic Circuits , 2010, IEEE Transactions on Instrumentation and Measurement.

[12]  B. Ravelo,et al.  Computational method of extraction of the 3D E-field from the 2D H-near-field using PWS transform , 2011, 10th International Symposium on Electromagnetic Compatibility.

[13]  Tapan K. Sarkar,et al.  Near-field to near/far-field transformation for arbitrary near-field geometry utilizing an equivalent electric current and MoM , 1999 .

[14]  D. Beetner,et al.  Prediction of Radiated Emissions Using Near-Field Measurements , 2011, IEEE Transactions on Electromagnetic Compatibility.

[15]  Miguel Rodriguez,et al.  EMI Radiated Noise Measurement System Using the Source Reconstruction Technique , 2008, IEEE Transactions on Industrial Electronics.

[16]  J. Hansen Spherical near-field antenna measurements , 1988 .

[17]  M. Arias,et al.  Radiated noise measurement system to estimate the EMI regulations compliance of a power electronic circuit , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[18]  Carretera de Valencia,et al.  The finite element method in electromagnetics , 2000 .

[19]  Ji Zhang,et al.  An Effective Method of Probe Calibration in Phase-Resolved Near-Field Scanning for EMI Application , 2013, IEEE Transactions on Instrumentation and Measurement.