A balance-in-a-box: an integrated paper-based weighing balance for infant birth weight determination

The birth weight of babies is generally used as a health state indicator but is not often recorded in resource-poor settings due to limited access to medical clinics. In this work we develop a low-cost and lightweight “balance-in-a-box” that could allow remote communities to have access to a weighing balance. The “balance-in-a-box” is a cardboard mailing box which is reconstructed to form the balance tray, with a novel piezoresistive pressure sensor underneath, a paper-based readout system and battery integrated with copper tape to form an electrical circuit. The readout system comprises multiple segments of electrochromic Prussian blue/polyaniline on conductive gold nanoparticle films connected by graphite resistive separators. The color of each segment is voltage dependent and is directly correlated to the weight applied to the pressure sensor. It is shown that by varying the properties of the readout system (total resistance, individual resistance values of the graphite separators and number of gold nanoparticle segments) that it is possible to tune the critical weight values in which the gold nanoparticle segments change color. Overall, this work demonstrates that babies can be classified as very low birth weight ( 2.5 kg) using a simple, integrated paper-based system that can be deployed to resource-poor settings where babies are at greatest risk of being underweight and requiring health care treatment.

[1]  G. Whitesides,et al.  Foldable Printed Circuit Boards on Paper Substrates , 2010 .

[2]  Contributions from M. Walpole.  The Millennium Development Goals Report , 2008 .

[3]  Hiranmay Saha,et al.  Design optimization of a high performance silicon MEMS piezoresistive pressure sensor for biomedical applications , 2006 .

[4]  J. Justin Gooding,et al.  An Integrated Paper‐Based Readout System and Piezoresistive Pressure Sensor for Measuring Bandage Compression , 2016 .

[5]  R. Puers,et al.  A Low-Cost and Highly Integrated Fiber Optical Pressure Sensor System , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[6]  T. Wardlaw,et al.  Monitoring low birth weight: an evaluation of international estimates and an updated estimation procedure. , 2005, Bulletin of the World Health Organization.

[7]  P. Lambin,et al.  Decoding tumour phenotype by noninvasive imaging using a quantitative radiomics approach , 2014, Nature Communications.

[8]  Yonggang Huang,et al.  Conformable amplified lead zirconate titanate sensors with enhanced piezoelectric response for cutaneous pressure monitoring , 2014, Nature Communications.

[9]  Zhong Lin Wang,et al.  A paper-based nanogenerator as a power source and active sensor , 2013 .

[10]  Alar Ainla,et al.  Integrating Electronics and Microfluidics on Paper , 2016, Advanced materials.

[11]  Manos M. Tentzeris,et al.  Progress Towards the First Wireless Sensor Networks Consisting of Inkjet-Printed, Paper-Based RFID-Enabled Sensor Tags , 2010, Proceedings of the IEEE.

[12]  Devi D. Liana,et al.  Toward Paper-Based Sensors: Turning Electrical Signals into an Optical Readout System. , 2015, ACS applied materials & interfaces.

[13]  Narendra Kurra,et al.  Field effect transistors and RC filters from pencil-trace on paper. , 2013, Physical chemistry chemical physics : PCCP.

[14]  Marco Pirola,et al.  Smart piezoresistive tunnelling composite for flexible robotic sensing skin , 2013 .

[15]  N. Hu,et al.  Tunneling effect in a polymer/carbon nanotube nanocompositestrain sensor , 2008 .

[16]  Frank Clemens,et al.  Textile Pressure Sensor Made of Flexible Plastic Optical Fibers , 2008, Sensors.

[17]  Metin Sitti,et al.  High-Performance Multiresponsive Paper Actuators. , 2016, ACS nano.

[18]  S. Tjin,et al.  Fiber Bragg grating based shear-force sensor: modeling and testing , 2004, Journal of Lightwave Technology.

[19]  G. Whitesides,et al.  Electrically Activated Paper Actuators , 2016 .

[20]  Jan Meyer,et al.  Design and Modeling of a Textile Pressure Sensor for Sitting Posture Classification , 2010, IEEE Sensors Journal.

[21]  J. Lewis,et al.  Pen‐on‐Paper Flexible Electronics , 2011, Advanced materials.

[22]  D. Barker.  EDITORIAL: The developmental origins of adult disease , 2002, European Journal of Epidemiology.

[23]  Peihua Zhang,et al.  A flexible piezoelectric force sensor based on PVDF fabrics , 2011 .

[24]  Z. Dang,et al.  Effect of aspect ratio of multiwall carbon nanotubes on resistance-pressure sensitivity of rubber nanocomposites , 2007 .

[25]  C. Gau,et al.  Piezoresistive characteristics of MWNT nanocomposites and fabrication as a polymer pressure sensor. , 2009, Nanotechnology.

[26]  George M Whitesides,et al.  Thin, lightweight, foldable thermochromic displays on paper. , 2009, Lab on a chip.

[27]  F. Caruso,et al.  Spontaneous phase transfer of nanoparticulate metals from organic to aqueous media. , 2001, Angewandte Chemie.

[28]  Sung Youb Kim,et al.  Giant tunneling piezoresistance of composite elastomers with interlocked microdome arrays for ultrasensitive and multimodal electronic skins. , 2014, ACS nano.

[29]  T. Wardlaw,et al.  Low birthweight: country regional and global estimates. , 2004 .

[30]  Yi Cui,et al.  Nanostructured paper for flexible energy and electronic devices , 2013 .

[31]  Elvira Fortunato,et al.  Thin Film Silicon Photovoltaic Cells on Paper for Flexible Indoor Applications , 2015 .

[32]  Seokheun Choi,et al.  Paper-based batteries: a review. , 2014, Biosensors & bioelectronics.

[33]  George M Whitesides,et al.  Inkjet Printing of Conductive Inks with High Lateral Resolution on Omniphobic “RF Paper” for Paper‐Based Electronics and MEMS , 2014, Advanced materials.

[34]  Jie Xu,et al.  Recent Advancements in Functionalized Paper-Based Electronics. , 2016, ACS applied materials & interfaces.

[35]  CONDUCTION MECHANISMS IN SOME GRAPHITE-POLYMER COMPOSITES : EFFECTS OF TEMPERATURE AND HYDROSTATIC PRESSURE , 1998 .

[36]  Giancarlo Canavese,et al.  Spiky nanostructured metal particles as filler of polymeric composites showing tunable electrical conductivity , 2012 .

[37]  Richard M Crooks,et al.  Paper-based electrochemical sensing platform with integral battery and electrochromic read-out. , 2012, Analytical chemistry.

[38]  Mathias Brust,et al.  Synthesis of thiol-derivatised gold nanoparticles in a two-phase liquid-liquid system , 1994 .

[39]  J. Justin Gooding,et al.  Sintered gold nanoparticles as an electrode material for paper-based electrochemical sensors , 2013 .

[40]  D. Barker,et al.  The Developmental Origins of Adult Disease , 2004, Journal of the American College of Nutrition.

[41]  Ming-Yih Lee,et al.  Development of a flexible PDMS capacitive pressure sensor for plantar pressure measurement , 2012 .

[42]  S. Karande.  Consequences of low birth weight, maternal illiteracy and poor access to medical care in rural India: infantile iatrogenic Cushing syndrome , 2015, BMJ Case Reports.

[43]  Danick Briand,et al.  Green paper-based piezoelectronics for sensors and actuators , 2016 .

[44]  Cédric Cochrane,et al.  Polyaniline: Application as solid state electrochromic in a flexible textile display , 2013, Displays.

[45]  Xuewen Wang,et al.  Silk‐Molded Flexible, Ultrasensitive, and Highly Stable Electronic Skin for Monitoring Human Physiological Signals , 2014, Advanced materials.

[46]  Giancarlo Canavese,et al.  Flexible Tactile Sensing Based on Piezoresistive Composites: A Review , 2014, Sensors.

[47]  K. Walus,et al.  Paper as a platform for sensing applications and other devices: a review. , 2015, ACS applied materials & interfaces.

[48]  J. Justin Gooding,et al.  Recent Advances in Paper-Based Sensors , 2012, Sensors.

[49]  Jinping Ou,et al.  Nanotip-induced ultrahigh pressure-sensitive composites: Principles, properties and applications , 2014 .

[50]  You Min Chang,et al.  A NOVEL PIEZOELECTRIC PVDF FILM-BASED PHYSIOLOGICAL SENSING BELT FOR A COMPLEMENTARY RESPIRATION AND HEARTBEAT MONITORING SYSTEM , 2009 .