Environmental testing of wireless sensor system for structural health monitoring of civil infrastructure

Presented in this paper is the environmental testing of Wireless Intelligent Sensor and Actuator Network (WISAN) currently under development at Clarkson University for the use of long-term structural health monitoring of civil infrastructure. The wireless sensor nodes will undergo controlled mechanical vibration and environmental testing in the laboratory. A temperature chamber will be used to perform temperature cycle tests on the sensor nodes. The temperature chamber will also houses a small shaker capable of introducing mechanical loading under the controlled temperature cycle tests. At low temperatures, the resistance of the electronics processing and storage characteristics will be studied. Also, the testing will look at volume expansion and degradation of characteristics due to freezing, degradation of functions and performance, and mechanical characteristics caused by contraction. At high temperatures, temperature-related changes in sensor nodes due to excessively high temperatures will be investigated. Also studied will be the effects of temperature cycles, including the thermal stresses induced in the nodes and housing and the distortion caused due to expansion and contraction, fatigue, cracks, and changes in electrical characteristics due to mechanical displacement. And finally, mechanical vibration loading will be introduced to the WISAN sensor nodes. Mechanical looseness, fatigue destruction, wire disconnection, damage due to harmonic vibration, defective socket contact, joint wear, destruction due to harmonics, lead breakage, occurrence of noise and abnormal vibration, cracking will be monitored. The eventual goal of the tests is to verify WISAN's performance under anticipated field conditions in which the sensors will be deployed.

[1]  D. Satpathi,et al.  Dynamic characterization of a long span bridge: A finite element based approach , 1997 .

[2]  Maria Q. Feng,et al.  MEMS-Based Wireless Real-Time Health Monitoring of Bridges , 2004 .

[3]  C. Fritzen,et al.  DAMAGE DETECTION BASED ON MODEL UPDATING METHODS , 1998 .

[4]  Charles R. Farrar,et al.  Comparative study of damage identification algorithms applied to a bridge: I. Experiment , 1998 .

[5]  O. S. Salawu.  Detection of structural damage through changes in frequency: a review , 1997 .

[6]  Xinlin Qing,et al.  Advances in utilization of structurally integrated sensor networks for health monitoring in commercial applications , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  David A. Nix,et al.  Vibration–based structural damage identification , 2001, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[8]  Vittal S. Rao,et al.  Lessons learned about wireless technologies for data acquistion , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[9]  Robert D. Adams,et al.  The location of defects in structures from measurements of natural frequencies , 1979 .

[10]  Virginia Vassilevska,et al.  Sensor network application framework for autonomous structural health monitoring of bridges , 2004 .

[11]  Arun Kumar Pandey,et al.  Damage detection from changes in curvature mode shapes , 1991 .

[12]  Norris Stubbs,et al.  Damage identification in beam-type structures: frequency-based method vs mode-shape-based method , 2003 .

[13]  Joel P. Conte,et al.  Elements of an integrated health monitoring framework , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.