On the Color Stability of Phosphor-Converted White LEDs Under DC, PWM, and Bilevel Drive

Most commercial white LEDs are made from nitride-based blue LEDs coated with yttrium aluminium garnet phosphor, which produce spectra that shift in opposite directions under the influences of drive current and junction temperature changes. This property gives rise to different emitted spectra, hence chromaticity properties, when the LED is driven/dimmed by different current waveforms. By using a commercial white LED sample, LUXEON K2, the effects of drive current and junction temperature on the changes of chromaticity coordinates are studied experimentally. The impact of dc, pulse width modulation (PWM), and bilevel current waveform is discussed through a graphical analysis, followed by experimental verification. It is proven that dc offers the best color stability over dimming due to the counteracting influences of drive current and junction temperature variations, whereas an LED constantly suffers from noneliminable chromaticity changes when driven by the PWM. Theoretical explanations are given to justify these cases, and it is found that, for the case of dc drive, an ideal heat sink's thermal resistance can be selected based on a simple equation to minimize the overall chromaticity change over dimming. This paper provides an in-depth discussion on the relations between the chromaticity properties of phosphor-converted (pc) white LEDs and the driving/dimming methods used.

[1]  Nadarajah Narendran,et al.  Characterization of thermal resistance coefficient of high-power LEDs , 2006, SPIE Optics + Photonics.

[2]  Muhammad Tariq,et al.  Bilevel Current Driving Technique for LEDs , 2014 .

[3]  Nadarajah Narendran,et al.  Impact of dimming white LEDs: chromaticity shifts due to different dimming methods , 2005, SPIE Optics + Photonics.

[4]  Michael R. Krames,et al.  High-power phosphor-converted light-emitting diodes based on III-Nitrides , 2002 .

[5]  Xiaohui Qu,et al.  Color Control System for RGB LED Light Sources Using Junction Temperature Measurement , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.

[6]  S. Nakamura.  InGaN/AlGaN blue-light-emitting diodes , 1995 .

[7]  Tsai-Fu Wu,et al.  Sequential Color LED Backlight Driving System for LCD Panels , 2007, IEEE Transactions on Power Electronics.

[8]  D. Zinger,et al.  An effective LED dimming approach , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[9]  Takashi Mukai,et al.  Phosphor-Conversion White Light Emitting Diode Using InGaN Near-Ultraviolet Chip , 2002 .

[10]  B. Ackermann,et al.  Control of LEDs , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[11]  Ke-Horng Chen,et al.  A high accuracy current-balanced control technique for LED backlight , 2008, 2008 IEEE Power Electronics Specialists Conference.

[12]  C.K. Tse,et al.  On Driving Techniques for LEDs: Toward a Generalized Methodology , 2009, IEEE Transactions on Power Electronics.

[13]  Nadarajah Narendran,et al.  Spectral and luminous efficacy change of high-power LEDs under different dimming methods , 2006, SPIE Optics + Photonics.

[14]  Shuji Nakamura,et al.  Effects of Phosphor Application Geometry on White Light-Emitting Diodes , 2006 .

[15]  M. Rico-Secades,et al.  Dimming of High-Brightness LEDs by Means of Luminous Flux Thermal Estimation , 2009, IEEE Transactions on Power Electronics.

[16]  Xiaobo Wu,et al.  High dimming ratio LED driver with fast transient boost converter , 2008, 2008 IEEE Power Electronics Specialists Conference.

[17]  Isamu Akasaki,et al.  Quantum-Confined Stark Effect due to Piezoelectric Fields in GaInN Strained Quantum Wells , 1997 .

[18]  S. Hui,et al.  A General Photo-Electro-Thermal Theory for Light Emitting Diode (LED) Systems , 2009, IEEE Transactions on Power Electronics.

[19]  S. Muthu,et al.  Red, green, and blue LED based white light generation: issues and control , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[20]  M. Craford,et al.  Status and Future of High-Power Light-Emitting Diodes for Solid-State Lighting , 2007, Journal of Display Technology.

[21]  D. H. Mash,et al.  Light-emitting diodes , 1977, Nature.

[22]  S. Nakamura,et al.  Current and Temperature Dependences of Electroluminescence of InGaN-Based UV/Blue/Green Light-Emitting Diodes , 1998 .

[23]  Chin-Yang Wu,et al.  Fast Transition Current-Type Burst-Mode Dimming Control for the LED Back-Light Driving System of LCD TV , 2006 .