A formulation and implementation of geometrically exact curved beam elements incorporating finite strains and finite rotations

Abstract This paper deals with the formulation and implementation of the curved beam elements based on the geometrically exact curved/twisted beam theory assuming that the beam cross-section remains rigid. The summarized beam theory is used for the slender beams or rods. Along with the beam theory, some basic concepts associated with finite rotations and their parametrizations are briefly summarized. In terms of a non-vectorial parametrization of finite rotations under spatial descriptions, a formulation is given for the virtual work equations that leads to the load residual and tangential stiffness operators. Taking the advantage of the simplicity in formulation and clear classical meanings of both rotations and moments, the non-vectorial parametrization is applied to implement a four-noded 3-D curved beam element, in which the compound rotation is represented by the unit quaternion and the incremental rotation is parametrized using the incremental rotation vector. Only static problems are considered. Conventional Lagrangian interpolation functions are adopted to approximate both the reference curve and incremental rotation of the deformed beam. Reduced integration is used to overcome locking problems. The finite element equations are developed for static structural analyses, including deformations, stress resultants/couples, and linearized/nonlinear bifurcation buckling, as well as post-buckling analyses of arches subjected to different types of loads, such as self-weight, snow, and pressure (wind) loads. Several examples are used to test the formulation and its Fortran implementation.

[1]  E. Reissner.  On finite deformations of space-curved beams , 1981 .

[2]  S. Atluri,et al.  On a consistent theory, and variational formulation of finitely stretched and rotated 3-D space-curved beams , 1988 .

[3]  Gordan Jelenić,et al.  Geometrically exact 3D beam theory: implementation of a strain-invariant finite element for statics and dynamics , 1999 .

[4]  Jing Li,et al.  A geometrically exact curved beam theory and its finite element formulation/implementation , 2000 .

[5]  J. C. Simo,et al.  Non-linear dynamics of three-dimensional rods: Exact energy and momentum conserving algorithms , 1995 .

[6]  A. Ibrahimbegovic,et al.  Stress resultant geometrically nonlinear shell theory with drilling rotations—Part II. Computational aspects , 1994 .

[7]  J. Argyris.  An excursion into large rotations , 1982 .

[8]  G.A.O. Davies,et al.  A 3-D, co-rotational, curved and twisted beam element , 1990 .

[9]  J. C. Simo,et al.  A finite strain beam formulation. The three-dimensional dynamic problem. Part I , 1985 .

[10]  M. Géradin,et al.  A beam finite element non‐linear theory with finite rotations , 1988 .

[11]  S. Atluri,et al.  Dynamic analysis of finitely stretched and rotated three-dimensional space-curved beams , 1988 .

[12]  Rakesh K. Kapania,et al.  On a geometrically exact curved/twisted beam theory under rigid cross-section assumption , 2003 .

[13]  S. Atluri,et al.  Large-deformation, elasto-plastic analysis of frames under nonconservative loading, using explicitly derived tangent stiffnesses based on assumed stresses , 1987 .

[14]  K. Bathe,et al.  Large displacement analysis of three‐dimensional beam structures , 1979 .

[15]  Robert Schmidt,et al.  Instability of Clamped-Hinged Circular Arches Subjected to a Point Load , 1975 .

[16]  M. Saje.  Finite element formulation of finite planar deformation of curved elastic beams , 1991 .

[17]  J. C. Simo,et al.  A three-dimensional finite-strain rod model. Part II: Computational aspects , 1986 .

[18]  A. Ibrahimbegovic,et al.  Computational aspects of vector-like parametrization of three-dimensional finite rotations , 1995 .

[19]  C. Franchi,et al.  A WEAK–WEAK FORMULATION FOR LARGE DISPLACEMENTS BEAM STATICS: A FINITE VOLUMES APPROXIMATION , 1996 .

[20]  S. Atluri,et al.  Rotations in computational solid mechanics , 1995 .

[21]  Gordan Jelenić,et al.  A kinematically exact space finite strain beam model - finite element formulation by generalized virtual work principle , 1995 .

[22]  Min Oak-key,et al.  NUMERICAL REDUCED MINIMIZATION THEORY FOR BEAM ELEMENTS UNDER NON‐UNIFORM ISOPARAMETRIC MAPPING , 1996 .

[23]  A. Ibrahimbegovic.  On finite element implementation of geometrically nonlinear Reissner's beam theory: three-dimensional curved beam elements , 1995 .

[24]  J. C. Simo,et al.  A Geometrically-exact rod model incorporating shear and torsion-warping deformation , 1991 .

[25]  Ekkehard Ramm,et al.  Displacement dependent pressure loads in nonlinear finite element analyses , 1984 .

[26]  E. Reissner.  On one-dimensional finite-strain beam theory: The plane problem , 1972 .

[27]  E. Stein,et al.  On the parametrization of finite rotations in computational mechanics: A classification of concepts with application to smooth shells , 1998 .

[28]  M. Crisfield.  A FAST INCREMENTAL/ITERATIVE SOLUTION PROCEDURE THAT HANDLES "SNAP-THROUGH" , 1981 .