CFD study of constructal microchannel networks for liquid-cooling of electronic devices

Abstract The heat transfer performance of liquid-cooled heat sinks with a constructal design of the flow field configurations is assessed in the present investigation. Y- and Ψ-shaped microfluidic networks embedded on a silicon substrate are numerically analyzed and compared in order to propose an alternative cooling layer for integrated circuits (ICs). The shape, path and geometric dimensions of the flow channels are designed with the Phi number and Allometric scaling laws based on constructal networks, resulting in tree-shaped flow paths with variable hydraulic diameter. The thermal and hydraulic performances of eight different configurations are discussed in terms of the average surface temperature and pressure drop, respectively. Results indicate that the Ψ-shaped heat sink designs offer a higher degree of temperature uniformity than Y-shaped designs, with the penalty of a slightly higher flow restriction. It was observed that the Phi number ratio has a strong effect on thermal performance, with enhanced results for higher ratios. Discussions about heat transfer area, temperature uniformity and pressure drop are given for the different cases, proposing an enhanced design for electronics cooling applications.

[1]  S. Kandlikar,et al.  Numerical Analysis of Novel Micro Pin Fin Heat Sink With Variable Fin Density , 2012, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[2]  Adrian Bejan,et al.  Constructal tree-shaped parallel flow heat exchangers , 2006 .

[3]  Arun S. Mujumdar,et al.  Effect of bifurcation angle in tree-shaped microchannel networks , 2007 .

[4]  R. Pease,et al.  High-performance heat sinking for VLSI , 1981, IEEE Electron Device Letters.

[5]  Vinod Srinivasan,et al.  Heat transfer—A review of 2003 literature , 2006 .

[6]  Deborah V. Pence,et al.  Fluid Flow Through Microscale Fractal-Like Branching Channel Networks , 2003 .

[7]  K. Toh,et al.  Numerical computation of fluid flow and heat transfer in microchannels , 2002 .

[8]  D. Pence,et al.  REDUCED PUMPING POWER AND WALL TEMPERATURE IN MICROCHANNEL HEAT SINKS WITH FRACTAL-LIKE BRANCHING CHANNEL NETWORKS , 2003 .

[9]  P. Painter,et al.  Pulsatile blood flow, shear force, energy dissipation and Murray's Law , 2006, Theoretical Biology and Medical Modelling.

[10]  A. Hernandez-Guerrero,et al.  Performance analysis of a proton exchange membrane fuel cell using tree-shaped designs for flow distribution , 2013 .

[11]  Adrian Bejan,et al.  Tree-shaped vascular wall designs for localized intense cooling , 2009 .

[12]  Adrian Bejan,et al.  Design with constructal theory , 2008 .

[13]  S. Kandlikar,et al.  Variable Fin Density Flow Channels for Effective Cooling and Mitigation of Temperature Nonuniformity in Three-Dimensional Integrated Circuits , 2014 .

[14]  D'arcy W. Thompson.  On growth and form i , 1943 .

[15]  Enrico Lorenzini,et al.  Constructal H-shaped cavities according to Bejan’s theory , 2007 .

[16]  D. Poulikakos,et al.  Laminar mixing, heat transfer and pressure drop in tree-like microchannel nets and their application for thermal management in polymer electrolyte fuel cells , 2004 .

[17]  Satish G. Kandlikar,et al.  High Flux Heat Removal with Microchannels—A Roadmap of Challenges and Opportunities , 2005 .

[18]  Y. Joshi,et al.  Single-phase liquid cooled microchannel heat sink for electronic packages , 2005 .

[19]  Adrian Bejan,et al.  Thermodynamic optimization of tree-shaped flow geometries with constant channel wall temperature , 2006 .

[20]  Arun S. Mujumdar,et al.  The effect of svelteness on the bifurcation angles role in pressure drop and flow uniformity of tree-shaped microchannels , 2011 .

[21]  Ghassan S. Kassab,et al.  Design of coronary circulation: A minimum energy hypothesis , 2007 .

[22]  Norbert Kockmann,et al.  Simulation and experimental investigation of pressure loss and heat transfer in microchannel networks containing bends and T-junctions , 2009 .

[23]  Arun S. Mujumdar,et al.  Flow and thermal characteristics of offset branching network , 2010 .

[24]  Xiulan Huai,et al.  Effects of thermal property variations on the liquid flow and heat transfer in microchannel heat sinks , 2007 .

[25]  Deborah V. Pence,et al.  The simplicity of fractal-like flow networks for effective heat and mass transport , 2010 .

[26]  S. Kandlikar.  Microchannels: Rapid Growth of a Nascent Technology , 2010 .

[27]  Arun S. Mujumdar,et al.  Numerical Analysis of Blockage and Optimization of Heat Transfer Performance of Fractal-like Microchannel Nets , 2006 .

[28]  P. Cheng,et al.  An experimental investigation on the thermal efficiency of fractal tree-like microchannel nets , 2005 .