Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure

Abstract The improvement in strength is usually accompanied by ductility loss in structural materials, which is a long-standing conflict referred as the strength-ductility trade-off. Here we present a heterogeneous-structures-architecting strategy, in which we design bulk high-entropy alloys with the largely-enhanced strength-ductility trade-off, possessing a yield strength of 711 MPa, a tensile strength of 928 MPa, and a uniform elongation of 30.3%. Such an enhancement of the strength-ductility trade-off is due to the microstructure comprised with a combination of the non-recrystallized and recrystallized grains arranged in complex heterogeneous structures with a characteristic dimension spanning from the submicron scale to the coarse-sized scale. The heterogeneous structures in the high-entropy alloy are produced by cold-rolling, followed by intermediate-temperature-annealing. Our results demonstrate that heterogeneous designs can be accomplished effectively by simple thermal treatments, which offer a design strategy towards a new generation of high-strength and high-ductility high-entropy alloys.

[1]  Fuping Yuan,et al.  Extraordinary strain hardening by gradient structure , 2014, Proceedings of the National Academy of Sciences.

[2]  Yong Zhang,et al.  The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures , 2016 .

[3]  Rajiv S. Mishra,et al.  Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy , 2015 .

[4]  E. George,et al.  Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries , 2014 .

[5]  D. Miracle,et al.  Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys , 2011 .

[6]  Dierk Raabe,et al.  A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility , 2014 .

[7]  M. Gao,et al.  High-Entropy Alloys: Fundamentals and Applications , 2016 .

[8]  C. D. Lundin,et al.  Fatigue behavior of a wrought Al 0.5 CoCrCuFeNi two-phase high-entropy alloy , 2015 .

[9]  Jien-Wei Yeh,et al.  Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys , 2012 .

[10]  Douglas L. Irving,et al.  A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures , 2015 .

[11]  Jens Lothe John Price Hirth,et al.  Theory of Dislocations , 1968 .

[12]  Mingxin Huang,et al.  Increasing yield strength of medium Mn steel by engineering multiple strengthening defects , 2018 .

[13]  Huan Ma,et al.  Nanocrystalline High-Entropy Alloys: A New Paradigm in High-Temperature Strength and Stability. , 2017, Nano letters.

[14]  T. Shun,et al.  Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .

[15]  Sunghak Lee,et al.  Effect of annealing heat treatment on microstructural evolution and tensile behavior of Al0.5CoCrFeMnNi high-entropy alloy , 2018, Materials Science and Engineering: A.

[16]  I. M. Robertson,et al.  Enhancing radiation tolerance by controlling defect mobility and migration pathways in multicomponent single-phase alloys , 2016, Nature Communications.

[17]  R. Ritchie,et al.  Bioinspired structural materials. , 2014, Nature Materials.

[18]  B. Cantor,et al.  Microstructural development in equiatomic multicomponent alloys , 2004 .

[19]  David Cebon,et al.  Materials Selection in Mechanical Design , 1992 .

[20]  Reinhard Pippan,et al.  Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation , 2015 .

[21]  J. Yeh,et al.  Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys , 2011 .

[22]  F. Yuan,et al.  Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility , 2015, Proceedings of the National Academy of Sciences.

[23]  Yong Zhang,et al.  Design of Light-Weight High-Entropy Alloys , 2016, Entropy.

[24]  R. Scattergood,et al.  Tensile properties of low-stacking fault energy high-entropy alloys , 2015 .

[25]  H. Sehitoglu,et al.  Slip nucleation in single crystal FeNiCoCrMn high entropy alloy , 2016 .

[26]  H. Kim,et al.  Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy , 2017, Nature Communications.

[27]  K. Dahmen,et al.  Microstructures and properties of high-entropy alloys , 2014 .

[28]  Hugh Alan Bruck,et al.  Processing bulk natural wood into a high-performance structural material , 2018, Nature.

[29]  Ting Zhu,et al.  Additively manufactured hierarchical stainless steels with high strength and ductility. , 2018, Nature materials.

[30]  G. Eggeler,et al.  The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy , 2013 .

[31]  K. An,et al.  A precipitation-hardened high-entropy alloy with outstanding tensile properties , 2016 .

[32]  Dingshun Yan,et al.  Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength , 2018, Proceedings of the National Academy of Sciences.

[33]  Sangho Kim,et al.  Brittle intermetallic compound makes ultrastrong low-density steel with large ductility , 2015, Nature.

[34]  Fenghua Zhou,et al.  High tensile ductility in a nanostructured metal , 2002, Nature.

[35]  R. Ritchie.  The conflicts between strength and toughness. , 2011, Nature materials.

[36]  K. Lu,et al.  Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale , 2009, Science.

[37]  F. Yuan,et al.  Dynamic Shear Deformation of a CrCoNi Medium-Entropy Alloy with Heterogeneous Grain Structures , 2018, Heterostructured Materials.

[38]  C. Tasan,et al.  Design of a twinning-induced plasticity high entropy alloy , 2015 .

[39]  T. Langdon,et al.  Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion , 2016 .

[40]  T. G. Nieh,et al.  Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy , 2013 .

[41]  K. Lu.  Stabilizing nanostructures in metals using grain and twin boundary architectures , 2016 .

[42]  C. Tasan,et al.  Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off , 2016, Nature.

[43]  Jien-Wei Yeh,et al.  Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy , 2014 .

[44]  P. Liaw,et al.  Friction Stir Processing of a High Entropy Alloy Al0.1CoCrFeNi , 2015 .

[45]  Rolf E. Hummel.  Understanding materials science , 1998 .

[46]  Xiaolong Ma,et al.  Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles , 2015, Nature.

[47]  P. Liaw,et al.  Strong grain-size effect on deformation twinning of an Al0.1CoCrFeNi high-entropy alloy , 2017 .

[48]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[49]  Peter V Liddicoat,et al.  Nanostructural hierarchy increases the strength of aluminium alloys. , 2010, Nature communications.

[50]  Ke An,et al.  Phase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering , 2017, Advanced materials.

[51]  Jian Lu,et al.  High‐Strength and High‐Ductility Nanostructured and Amorphous Metallic Materials , 2014, Advanced materials.

[52]  E. Ma,et al.  Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility. , 2013, Nature materials.

[53]  Dierk Raabe,et al.  Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation , 2017, Nature.

[54]  Xiaozhi Lim.  Mixed-up metals make for stronger, tougher, stretchier alloys , 2016, Nature.

[55]  C. Woodward,et al.  Accelerated exploration of multi-principal element alloys with solid solution phases , 2015, Nature Communications.

[56]  H. Bei,et al.  Nano-twin Mediated Plasticity in Carbon-containing FeNiCoCrMn High Entropy Alloys , 2015 .

[57]  R. Ritchie,et al.  A fracture-resistant high-entropy alloy for cryogenic applications , 2014, Science.

[58]  X. Feaugas.  On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: Back stress and effective stress , 1999 .

[59]  Y. H. Wang,et al.  Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure , 2017 .

[60]  T. Nieh,et al.  An assessment on the future development of high-entropy alloys: Summary from a recent workshop , 2015 .

[61]  Jian Lu,et al.  High-entropy alloy: challenges and prospects , 2016 .

[62]  G. Eggeler,et al.  Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy , 2016 .

[63]  G. Pharr,et al.  Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures , 2014 .

[64]  Youtong Fang,et al.  Deformation twinning behaviors of the low stacking fault energy high-entropy alloy: An in-situ TEM study , 2017 .

[65]  H. Noguchi,et al.  Bone-like crack resistance in hierarchical metastable nanolaminate steels , 2017, Science.

[66]  D. Miracle,et al.  A critical review of high entropy alloys and related concepts , 2016 .

[67]  C. Tasan,et al.  Composition Dependence of Phase Stability, Deformation Mechanisms, and Mechanical Properties of the CoCrFeMnNi High-Entropy Alloy System , 2014 .

[68]  Huajian Gao,et al.  Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins , 2014, Nature Communications.