Smart Magnetorheological (MR) Finishing Technology and Its Applications

[1]  Omid Mahian,et al.  Enhancement of PCM solidification using inorganic nanoparticles and an external magnetic field with application in energy storage systems , 2019, Journal of Cleaner Production.

[2]  Ahmad Shafee,et al.  Heat transfer behavior of nanoparticle enhanced PCM solidification through an enclosure with V shaped fins , 2019, International Journal of Heat and Mass Transfer.

[3]  M. Sheikholeslami,et al.  New computational approach for exergy and entropy analysis of nanofluid under the impact of Lorentz force through a porous media , 2019, Computer Methods in Applied Mechanics and Engineering.

[4]  R. Moradi,et al.  Application of Neural Network for estimation of heat transfer treatment of Al2O3-H2O nanofluid through a channel , 2019, Computer Methods in Applied Mechanics and Engineering.

[5]  M. Sheikholeslami,et al.  Numerical approach for MHD Al2O3-water nanofluid transportation inside a permeable medium using innovative computer method , 2019, Computer Methods in Applied Mechanics and Engineering.

[6]  M. Sheikholeslami.  Application of Darcy law for nanofluid flow in a porous cavity under the impact of Lorentz forces , 2018, Journal of Molecular Liquids.

[7]  Zhixiong Li,et al.  Second law analysis for nanofluid turbulent flow inside a circular duct in presence of twisted tape turbulators , 2018, Journal of Molecular Liquids.

[8]  M. Sheikholeslami.  Influence of magnetic field on Al2O3-H2O nanofluid forced convection heat transfer in a porous lid driven cavity with hot sphere obstacle by means of LBM , 2018, Journal of Molecular Liquids.

[9]  Xufeng Dong,et al.  High performance magnetorheological fluids with flower-like cobalt particles , 2017 .

[10]  Zhen Fang,et al.  Configuration design and accuracy analysis of a novel magnetorheological finishing machine tool for concave surfaces with small radius of curvature , 2016 .

[11]  Xiaoyuan Li,et al.  The Magnetorheological Finishing (MRF) of Potassium Dihydrogen Phosphate (KDP) Crystal with Fe3O4 Nanoparticles , 2016, Nanoscale Research Letters.

[12]  Guipeng Tie,et al.  Analysis of surface quality and processing optimization of magnetorheological polishing of KDP crystal , 2015 .

[13]  S. Jha,et al.  Experimental investigation into tool aging effect in ball end magnetorheological finishing , 2015 .

[14]  T. Je,et al.  Material removal of glass by magnetorheological fluid jet , 2015 .

[15]  Assefa Asmare Tsegaw,et al.  Ultra-Precision Polishing of N-Bk7 Using an Innovative Self-Propelled Abrasive Fluid Multi-Jet Polishing Tool , 2015 .

[16]  Wei Chen,et al.  Study on the magnetorheological finishing method for the WEDMed pierced die cavity , 2015 .

[17]  Pulak M. Pandey,et al.  Mechanism of material removal in ball end magnetorheological finishing process , 2013 .

[18]  Anant Kumar Singh,et al.  Nanofinishing of Fused Silica Glass Using Ball-End Magnetorheological Finishing Tool , 2012 .

[19]  Vijay K. Jain,et al.  Nanofinishing of flat workpieces using rotational–magnetorheological abrasive flow finishing (R-MRAFF) process , 2012 .

[20]  A. Meunier,et al.  Rotational diffusion may govern the rheology of magnetic suspensions , 2011 .

[21]  V. Jain,et al.  Rheological Characterization of Magnetorheological Finishing Fluid , 2009 .

[22]  Sang Jo Lee,et al.  Magnetorheological finishing process for hard materials using sintered iron-CNT compound abrasives , 2009 .

[23]  Vijay K. Jain,et al.  Analysis of magnetorheological abrasive flow finishing (MRAFF) process , 2008 .

[24]  J. Lambropoulos,et al.  Removal rate model for magnetorheological finishing of glass. , 2007, Applied optics.

[25]  Norliana Mohd Abbas,et al.  A review on current research trends in electrical discharge machining (EDM) , 2007 .

[26]  C. Radcliffe,et al.  Internal organizational measurement for control of magnetorheological fluid properties , 2007 .

[27]  K. Furuya,et al.  Nano-fabrication using electron-beam-induced deposition combined with low energy ion milling , 2004 .

[28]  J. Schmidt,et al.  New applications for micro-EDM , 2004 .

[29]  S. Babu,et al.  Chemical mechanical polishing of thermal oxide films using silica particles coated with ceria , 2002 .

[30]  Tetsuya Hoshino,et al.  Mechanism of polishing of SiO2 films by CeO2 particles , 2001 .

[31]  William Kordonski,et al.  Magnetorheological finishing (MRF) in commercial precision optics manufacturing , 1999, Optics + Photonics.

[32]  P. Phulé,et al.  Synthesis of Novel Magnetorheological Fluids , 1998 .

[33]  L. Cook.  Chemical processes in glass polishing , 1990 .

[34]  V. Jain,et al.  A 2D CFD simulation of MR polishing medium in magnetic field-assisted finishing process using electromagnet , 2015 .

[35]  F. Hashimoto,et al.  Magnetic Abrasive Finishing of cutting tools for high-speed machining of titanium alloys , 2014 .

[36]  H. Choi,et al.  Sequential coating of magnetic carbonyliron particles with polystyrene and multiwalled carbon nanotubes and its effect on their magnetorheology. , 2010, ACS applied materials & interfaces.

[37]  Zhijian Pei,et al.  Grinding wheels for manufacturing of silicon wafers: A literature review , 2007 .

[38]  William Kordonski,et al.  Magnetorheological Jet (MR JetTM) Finishing Technology , 2006 .

[39]  Takeo Shinmura,et al.  Study on Magnetic Abrasive Finishing , 1990 .

[40]  Takeo Shinmura,et al.  Study on internal finishing of a non-ferromagnetic tubing by magnetic abrasive machining process , 1988 .

[41]  C. Das.  The Reaction Between Borate Glass and Attacking Agents—Part III: Equilibrium pH of the Alkali Borate Glasses and Their Relationship with Chemical Durability and the Glass Composition , 1967 .