Synthesis, biodegradability, and biocompatibility of lysine diisocyanate-glucose polymers.

The success of a tissue-engineering application depends on the use of suitable biomaterials that degrade in a timely manner and induce the least immunogenicity in the host. With this purpose in mind, we have attempted to synthesize a novel nontoxic biodegradable lysine diisocyanate (LDI)- and glucose-based polymer via polymerization of highly purified LDI with glucose and its subsequent hydration to form a spongy matrix. The LDI-glucose polymer was degradable in aqueous solutions at 37, 22, and 4 degrees C, and yielded lysine and glucose as breakdown products. The degradation products of the LDI-glucose polymer did not significantly affect the pH of the solution. The physical properties of the polymer were found to be adequate for supporting cell growth in vitro, as evidenced by the fact that rabbit bone marrow stromal cells (BMSCs) attached to the polymer matrix, remained viable on its surface, and formed multilayered confluent cultures with retention of their phenotype over a period of 2 to 4 weeks. These observations suggest that the LDI-glucose polymer and its degradation products were nontoxic in vitro. Further examination in vivo over 8 weeks revealed that subcutaneous implantation of hydrated matrix degraded in vivo three times faster than in vitro. The implanted polymer was not immunogenic and did not induce antibody responses in the host. Histological analysis of the implanted polymer showed that LDI-glucose polymer induced a minimal foreign body reaction, with formation of a capsule around the degrading polymer. The results suggest that biodegradable peptide-based polymers can be synthesized, and may potentially find their way into biomedical applications because of their biodegradability and biocompatibility.

[1]  S. Agarwal,et al.  A new peptide-based urethane polymer: synthesis, biodegradation, and potential to support cell growth in vitro. , 2000, Biomaterials.

[2]  W Slob,et al.  A quantitative method for assessing the sensitizing potency of low molecular weight chemicals using a local lymph node assay: employment of a regression method that includes determination of the uncertainty margins. , 2000, Toxicology.

[3]  R. Gassner,et al.  Cyclic tensile stress exerts antiinflammatory actions on chondrocytes by inhibiting inducible nitric oxide synthase. , 1999, Journal of immunology.

[4]  R J Zdrahala,et al.  Biomedical Applications of Polyurethanes: A Review of Past Promises, Present Realities, and a Vibrant Future , 1999, Journal of biomaterials applications.

[5]  L. Munuera,et al.  Effect of Polyethylene on Osteocalcin, Alkaline Phosphatase and Procollagen Secretion by Human Osteoblastic Cells , 1998, Calcified Tissue International.

[6]  D. Hart,et al.  Pregnancy induces complex changes in the the pattern of mRNA expression in knee ligaments of the adolescent rabbit. , 1998, Matrix biology : journal of the International Society for Matrix Biology.

[7]  N. Piesco,et al.  Regulation of Periodontal Ligament Cell Functions by Interleukin-1β , 1998, Infection and Immunity.

[8]  D. Beezhold,et al.  Latex allergy in operating room nurses. , 1998, Annals of allergy, asthma & immunology : official publication of the American College of Allergy, Asthma, & Immunology.

[9]  G. B. Wang,et al.  Biodegradation of a poly(ester)urea-urethane by cholesterol esterase: isolation and identification of principal biodegradation products. , 1997, Journal of biomedical materials research.

[10]  P. Neuenschwander,et al.  Development of degradable polyesterurethanes for medical applications: in vitro and in vivo evaluations. , 1997, Journal of biomedical materials research.

[11]  C. Brighton,et al.  Mechanical strain-induced proliferation of osteoblastic cells parallels increased TGF-beta 1 mRNA. , 1996, Biochemical and biophysical research communications.

[12]  James M. Anderson Perspectives on the in vivo responses of biodegradable polymers , 1995 .

[13]  J. Braatz Biocompatible Polyurethane-Based Hydrogel , 1994, Journal of biomaterials applications.

[14]  C. Vacanti,et al.  Tissue-engineered morphogenesis of cartilage and bone by means of cell transplantation using synthetic biodegradable polymer matrices. , 1994, Clinics in plastic surgery.

[15]  A. U. Daniels,et al.  Six bioabsorbable polymers: in vitro acute toxicity of accumulated degradation products. , 1994, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

[16]  R Langer,et al.  Laminated three-dimensional biodegradable foams for use in tissue engineering. , 1993, Biomaterials.

[17]  D E Ingber,et al.  Preparation of poly(glycolic acid) bonded fiber structures for cell attachment and transplantation. , 1993, Journal of biomedical materials research.

[18]  A. M. Reed,et al.  Biostable polyurethane elastomers. , 1992, Medical device technology.

[19]  O. Böstman,et al.  Osteolytic changes accompanying degradation of absorbable fracture fixation implants. , 1991, The Journal of bone and joint surgery. British volume.

[20]  O. Böstman,et al.  Foreign-body reactions to fracture fixation implants of biodegradable synthetic polymers. , 1990, The Journal of bone and joint surgery. British volume.

[21]  A. J. Pennings,et al.  DESIGN AND SYNTHESIS OF BIODEGRADABLE POLY(ESTER-URETHANE) ELASTOMER NETWORKS COMPOSED OF NON-TOXIC BUILDING-BLOCKS , 1988 .

[22]  L. Idahl,et al.  Measurements of serum glucose using the luciferin/luciferase system and a liquid scintillation spectrometer. , 1986, Analytical biochemistry.

[23]  H. Planck,et al.  Polyurethanes in Biomedical Engineering , 1984 .

[24]  C. Hellerqvist,et al.  Attaching human fibroblasts secrete a type I procollagen rich in 3-hydroxyproline. , 1979, Biochemical and biophysical research communications.

[25]  J. Wall,et al.  Direct estimation of lysine in corn meals by the ninhydrin color reaction. , 1975, Journal of agricultural and food chemistry.

[26]  C. Chu,et al.  Pore structure analysis of swollen dextran-methacrylate hydrogels by SEM and mercury intrusion porosimetry. , 2000, Journal of biomedical materials research.

[27]  M. Meyerhoff,et al.  Preparation and characterization of hydrophobic polymeric films that are thromboresistant via nitric oxide release. , 2000, Biomaterials.

[28]  C. M. Agrawal,et al.  Sterilization, toxicity, biocompatibility and clinical applications of polylactic acid/polyglycolic acid copolymers. , 1996, Biomaterials.

[29]  L. Claes,et al.  In vitro biocompatibility of bioresorbable polymers: poly(L, DL-lactide) and poly(L-lactide-co-glycolide). , 1996, Biomaterials.

[30]  W C Hayes,et al.  Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone. , 1996, Biomaterials.

[31]  P. Ferruti,et al.  Degradation behaviour of block copolymers containing poly(lactic-glycolic acid) and poly(ethylene glycol) segments. , 1996, Biomaterials.

[32]  R Langer,et al.  Stabilized polyglycolic acid fibre-based tubes for tissue engineering. , 1996, Biomaterials.

[33]  Jeffrey O. Hollinger,et al.  Biomedical applications of synthetic biodegradable polymers , 1995 .

[34]  O. Böstman Absorbable implants for the fixation of fractures. , 1991, The Journal of bone and joint surgery. American volume.