Evolution of Directionally Freeze-Cast Fe2O3 and Fe2O3+NiO Green Bodies during Reduction and Sintering to Create Lamellar Fe and Fe-20Ni Foams

[1]  D. Dunand,et al.  Effects of pore morphology on the cyclical oxidation/reduction of iron foams created via camphene-based freeze casting , 2020 .

[2]  D. Dunand,et al.  Fe–Ni foams self-heal during redox cycling via reversible formation/homogenization of a ductile Ni scaffold , 2020, Journal of Materials Chemistry A.

[3]  K. K. Nielsen,et al.  Heat transfer and flow resistance analysis of a novel freeze-cast regenerator , 2020 .

[4]  C. Kenel,et al.  Kinetics of alloy formation and densification in Fe-Ni-Mo microfilaments extruded from oxide- or metal-powder inks , 2020 .

[5]  J. Missiaen,et al.  Effect of contact alignment on shrinkage anisotropy during sintering: Stereological model, discrete element model and experiments on NdFeB compacts. , 2020 .

[6]  D. Dunand,et al.  Hierarchical Structural Changes during Redox Cycling of Fe-Based Lamellar Foams containing YSZ, CeO2, or ZrO2. , 2020, ACS applied materials & interfaces.

[7]  J. Herguido,et al.  Doped iron oxide scaffolds with gradient porosity fabricated by freeze casting: pore morphology prediction and processing parameters , 2020 .

[8]  K. K. Nielsen,et al.  Characterization of Freeze-Cast Micro-Channel Monoliths as Active and Passive Regenerators , 2020, Frontiers in Energy Research.

[9]  D. Dunand,et al.  In operando tomography reveals degradation mechanisms in lamellar iron foams during redox cycling at 800 °C , 2020 .

[10]  A. Studart,et al.  3D Printing of Salt as a Template for Magnesium with Structured Porosity , 2019, Advanced materials.

[11]  Hyeji Park,et al.  Hierarchically structured nanoporous copper for use as lithium-ion battery anode , 2019, Scripta Materialia.

[12]  Hyeji Park,et al.  Freeze Casting is a Facile Method to Create Solid Solution Alloy Foams: Cu–Ni Alloy Foams via Freeze Casting , 2019, Advanced Engineering Materials.

[13]  Christophe L. Martin,et al.  Anisotropic sintering behavior of freeze-cast ceramics by optical dilatometry and discrete-element simulations , 2018, Acta Materialia.

[14]  Hyeji Park,et al.  Effects of Powder Carrier on the Morphology and Compressive Strength of Iron Foams: Water vs Camphene , 2018, Metallurgical and Materials Transactions B.

[15]  D. Dunand,et al.  Freeze Casting: A Review of Processing, Microstructure and Properties via the Open Data Repository, FreezeCasting.net , 2017, 1710.00037.

[16]  D. Dunand,et al.  Iron Oxide Photoelectrode with Multidimensional Architecture for Highly Efficient Photoelectrochemical Water Splitting. , 2017, Angewandte Chemie.

[17]  D. Dunand,et al.  Iron foams created by directional freeze casting of iron oxide, reduction and sintering , 2017 .

[18]  D. Ghosh,et al.  Influence of anisotropic grains (platelets) on the microstructure and uniaxial compressive response of ice-templated sintered alumina scaffolds , 2017 .

[19]  D. Dunand,et al.  Microstructure and compressive behavior of ice-templated copper foams with directional, lamellar pores , 2017 .

[20]  Nikhil D. Dhavale.  A Comparison of Microstructure and Uniaxial Compressive Response of Ice-Templated Porous Alumina Scaffolds Fabricated from Two Different Particle Sizes , 2016 .

[21]  R. Spolenak,et al.  Synthesis, structure and mechanical properties of ice-templated tungsten foams , 2016 .

[22]  Min Jeong Kim,et al.  Morphological Study of Directionally Freeze-Cast Nickel Foams , 2016 .

[23]  U. Schubert,et al.  Directional Solidification with Constant Ice Front Velocity in the Ice‐Templating Process   , 2016 .

[24]  G. Gouws,et al.  Microstructured silver surfaces produced by freeze casting for enhanced phase change heat transfer , 2015 .

[25]  R. Ritchie,et al.  Bioinspired large-scale aligned porous materials assembled with dual temperature gradients , 2015, Science Advances.

[26]  E. Levänen,et al.  Mechanical performance and CO2 uptake of ion-exchanged zeolite A structured by freeze-casting , 2015 .

[27]  Simsoo Park,et al.  Nanoparticle Filtration Characteristics of Advanced Metal Foam Media for a Spark Ignition Direct Injection Engine in Steady Engine Operating Conditions and Vehicle Test Modes , 2015 .

[28]  D. Dunand,et al.  Microstructure of Fe2O3 scaffolds created by freeze-casting and sintering , 2015 .

[29]  Francesco De Carlo,et al.  TomoPy: a framework for the analysis of synchrotron tomographic data , 2014, Optics & Photonics - Optical Engineering + Applications.

[30]  M. Meyers,et al.  Bioinspired Scaffolds with Varying Pore Architectures and Mechanical Properties , 2014 .

[31]  R. Ritchie,et al.  Unidirectional freezing of ceramic suspensions: in situ X-ray investigation of the effects of additives. , 2014, ACS applied materials & interfaces.

[32]  C. Hébert,et al.  Reduction of nickel oxide particles by hydrogen studied in an environmental TEM , 2013, Journal of Materials Science.

[33]  M. Stampanoni,et al.  Regridding reconstruction algorithm for real-time tomographic imaging , 2012, Journal of synchrotron radiation.

[34]  D. Dunand,et al.  Preparation and Characterization of Directionally Freeze-cast Copper Foams , 2012 .

[35]  T. Yang,et al.  Porous alumina/zirconia layered composites with unidirectional pore channels processed using a tertiary-butyl alcohol-based freeze casting , 2012 .

[36]  S. Sofie,et al.  Electrical and flexural anisotropy in freeze tape cast stainless steel porous substrates , 2011 .

[37]  Yue Zhang,et al.  Effect of Suspension State on the Pore Structure of Freeze‐Cast Ceramics , 2011 .

[38]  Richard Dashwood,et al.  Titanium foams for biomedical applications: a review , 2010 .

[39]  Robert P. Dougherty,et al.  Computing Local Thickness of 3D Structures with ImageJ , 2007, Microscopy and Microanalysis.

[40]  Hao Yu,et al.  Effect of the metal foam materials on the performance of methanol steam micro-reformer for fuel cells , 2007 .

[41]  Eduardo Saiz,et al.  Ice-templated porous alumina structures , 2007, 1710.04651.

[42]  Joachim Rösler,et al.  Fabrication of nanoporous Ni-based superalloy membranes , 2005 .

[43]  D. Dunand,et al.  Structural evolution of directionally freeze-cast iron foams during oxidation/reduction cycles , 2019, Acta Materialia.

[44]  D. Dunand,et al.  Surface-oxidized, freeze-cast cobalt foams: Microstructure, mechanical properties and electrochemical performance , 2018 .

[45]  S. Deville.  Freezing Colloids: Observations, Principles, Control, and Use: Applications in Materials Science, Life Science, Earth Science, Food Science, and Engineering , 2017 .

[46]  D. Dunand,et al.  Directionally freeze-cast titanium foam with aligned, elongated pores , 2008 .

[47]  Mustafa Guden,et al.  Metals foams for biomedical applications: processing and mechanical properties. , 2004, Advances in experimental medicine and biology.