Reactor Operating Procedures for Startup of Continuously-Operated Chemical Plants

Rules are presented for the startup of an adiabatic tubular reactor, based on a qualitative analysis of the dynamic behavior of continuously-operated vapor- and liquid-phase processes. The relationships between the process dynamics, operating criteria, and operating constraints are investigated, since a reactor startup cannot be isolated from an entire plant startup. Composition control of the process material is critical to speed up plant startup operations and to minimize the amount of offgrade materials. The initial reactor conditions are normally critical for a successful startup. For process conditioning, a plant should have an operating mode at which the reactor can be included in a recycle loop together with its feed system and downstream process section. Experimental data of an adiabatic tubular reactor startup and thermal runaway demonstrate some operational problems when such an intermediate operating stage is missing. The derived rules are applied to an industrial, highly heat-integrated reactor section, and the resulting startup strategy is summarized in an elementary-step diagram.

[1]  P. H. Kösters,et al.  Simultaneous Process and System Control Design: An Actual Industrial Case , 1992 .

[2]  Vital Aelion,et al.  A unified strategy for the retrofit synthesis of flowsheet structures for attaining or improving operating procedures , 1991 .

[3]  Vital Aelion,et al.  Evaluation of stationary state stability for the synthesis of operating procedures , 1991 .

[4]  George Stephanopoulos,et al.  Synthesis of operating procedures for complete chemical plants—I. Hierarchical, structured modelling for nonlinear planning , 1988 .

[5]  Colin A. Crooks.  Synthesis of operating procedures for chemical plants , 1992 .

[6]  R. Mann,et al.  Experimental fixed-bed reactor dynamics for SO2 oxidation , 1986 .

[7]  K. R. Westerterp,et al.  Safe design of cooled tubular reactors for exothermic, multiple reactions; parallel reactions—I: Development of criteria , 1984 .

[8]  William L. Luyben,et al.  Design and Control of Recycle Processes in Ternary Systems with Consecutive Reactions , 1992 .

[9]  Ram Lavie,et al.  Dynamics of plants with recycle , 1982 .

[10]  Pedro M. Saraiva,et al.  Continuous process improvement through inductive and analogical learning , 1992 .

[11]  Thomas E. Marlin,et al.  Effect of recycle structure on distillation tower time constants , 1986 .

[12]  K. R. Westerterp,et al.  Safe design of cooled tubular reactors for exothermic multiple reactions: Multiple-reaction networks , 1988 .

[13]  Klaas R. Westerterp,et al.  Startup of an industrial adiabatic tubular reactor , 1992 .

[14]  Gary J. Powers,et al.  Operating procedure synthesis using local models and distributed goals , 1988 .

[15]  George Stephanopoulos,et al.  Synthesis of operating procedures for complete chemical plants—II. A nonlinear planning methodology , 1988 .

[16]  Jacques Villermaux,et al.  Future challenges for basic research in chemical engineering , 1993 .

[17]  Gary J. Powers,et al.  A synthesis method for chemical plant operating procedures , 1987 .