Separation control by means of plasma actuation on a half cylinder approached by a turbulent boundary layer

The flow around a half cylinder (i.e. an immersed cylinder in a flat plate) approached by a turbulent boundary layer is studied, with the aim to control separation via steady Dielectric Barrier Discharge (DBD) plasma actuation. The electric wind induced by a single DBD plasma actuator is studied in quiescent air to understand the role of the different driving parameters and how the cylindrical shape influences the downstream development of the induced electric wind. A double DBD plasma actuator is then placed on the cylinder and the influence of the position of the actuator is studied in order to find the best achievable control. Comparison of the controlled and uncontrolled cases, using both hot-wire anemometry and pressure measurements, shows that a reduction of the separation bubble is possible. By optimizing the position of the double actuator, a reduction of up to 30% of the drag is achieved. The present geometry is chosen as a generic model of the flow around the front corners (A-pillars) of a truck cabin and the work is performed with the long-term vision to be able to reduce drag on trucks.

[1]  Richard Whalley,et al.  Turbulent boundary-layer control with plasma actuators , 2011, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[2]  S. Wilkinson,et al.  Dielectric Barrier Discharge Plasma Actuators for Flow Control , 2010 .

[3]  Michele Onorato,et al.  Drag Measurement Through Wake Analysis , 1984 .

[4]  P. Henrik Alfredsson,et al.  Numerical simulation of a plasma actuator on a half-submerged cylinder , 2013 .

[5]  Thomas Corke,et al.  Plasma Actuators for Separation Control of Low-Pressure Turbine Blades , 2006 .

[6]  C. Tropea,et al.  Delay of natural transition with dielectric barrier discharges , 2013 .

[7]  Kunihiko Taira,et al.  On the lock-on of vortex shedding to oscillatory actuation around a circular cylinder , 2013 .

[8]  T. Corke,et al.  Separation Control on HIgh Angle of Attack Airfoil Using Plasma Actuators , 2004 .

[9]  Eric Moreau,et al.  Airflow control by non-thermal plasma actuators , 2007 .

[10]  M. Kotsonis,et al.  Influence of circulation on a rounded-trailing-edge airfoil using plasma actuators , 2014 .

[11]  Ramis Örlü,et al.  Turbulent boundary layers at moderate Reynolds numbers: inflow length and tripping effects , 2012, Journal of Fluid Mechanics.

[12]  A. Kozlov,et al.  Plasma actuators for bluff body flow control , 2006 .

[13]  P. Stephen,et al.  Boundary Layer Flow Control With a One Atmosphere Uniform Glow Discharge Surface Plasma , 1998 .

[14]  P. Lavoie,et al.  Laminar Boundary-Layer Response to Spanwise Periodic Forcing by Dielectric-Barrier-Discharge Plasma-Actuator Arrays , 2015 .

[15]  E. Moreau,et al.  Optimization of a dielectric barrier discharge actuator by stationary and non-stationary measurements of the induced flow velocity: application to airflow control , 2007 .

[16]  Thomas Corke,et al.  Plasma Actuators for Cylinder Flow Control and Noise Reduction , 2008 .

[17]  F. Scarano,et al.  Control of vortex shedding from a blunt trailing edge using plasma actuators , 2013 .

[18]  E. Moreau,et al.  Response of a circular cylinder wake to a symmetric actuation by non-thermal plasma discharges , 2013 .

[19]  C. Tropea,et al.  Laser Doppler and Phase Doppler Measurement Techniques , 2002 .

[20]  E. Jumper,et al.  Mechanisms and Responses of a Dielectric Barrier Plasma Actuator: Geometric Effects , 2004 .

[21]  H. H. Fernholz,et al.  The incompressible zero-pressure-gradient turbulent boundary layer: An assessment of the data , 1996 .

[22]  F. Clauser.  The Turbulent Boundary Layer , 1956 .

[23]  Timothy Jukes,et al.  Active Separation Control over a NACA0024 by DBD Plasma Actuator and FBG Sensor , 2012 .

[24]  Cameron Tropea,et al.  Experimental and Numerical Investigations of Boundary-Layer Influence Using Plasma-Actuators , 2007 .

[25]  Ramis Örlü,et al.  On near wall measurements of wall bounded flows-The necessity of an accurate determination of the wall position , 2010 .

[26]  P. Spalart.  Direct simulation of a turbulent boundary layer up to Rθ = 1410 , 1988, Journal of Fluid Mechanics.

[27]  E. C. Maskell,et al.  Progress towards a method for the measurement of the components of the drag of a wing of finite span , 1972 .

[28]  Ahmed Naguib,et al.  Transient growth instability cancelation by a plasma actuator array , 2010 .

[29]  Kwing-So Choi,et al.  Control of unsteady flow separation over a circular cylinder using dielectric-barrier-discharge surface plasma , 2009 .

[30]  Fulvio Scarano,et al.  Measurement of the body force field of plasma actuators , 2011 .

[31]  D. Greenblatt,et al.  Mechanism of flow separation control using plasma actuation , 2012 .

[32]  T. Corke,et al.  Sensing and control of flow separation using plasma actuators , 2011, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[33]  M. Asai,et al.  Suppression of Tonal Trailing-Edge Noise From an Airfoil Using a Plasma Actuator , 2013 .

[34]  R. H. Barnard.  Road Vehicle Aerodynamic Design , 2010 .

[35]  H. Schlichting.  Boundary Layer Theory , 1955 .