Measurement of cantilever spring constant using an electrostatic sensing and actuating force measurement system

We report the measurement of the spring constant of a cantilever using an electrostatic sensing and actuating force measurement system. The force measurement system consists of three main parts: a monolithic flexure stage, a three-electrode capacitor, and a digital controller. The most important feature of the system is the utilization of the three-electrode capacitor simultaneously as a position sensor and an electrostatic force generator. This allows us to constantly adjust and maintain gap distances between three electrodes, which is critical for this design to generate precise electrostatic compensation force. The force measurement system was partly upgraded and its performance was improved. The uncertainty estimation for the upgraded force measurement system is given. By measuring the spring constant of a commercially available cantilever force sensor, we demonstrate that the force measurement system is capable of calibrating the cantilever spring constant. The spring constant of the cantilever force sensor was measured to be (2227 ± 63) mN m−1 (coverage factor k = 2), corresponding to a relative expanded uncertainty of 2.8%.

[1]  S Schlamminger,et al.  Temporal extent of surface potentials between closely spaced metals. , 2008, Physical review letters.

[2]  D. W. Allan,et al.  Should the classical variance be used as a basic measure in standards metrology? , 1987, IEEE Transactions on Instrumentation and Measurement.

[3]  Stuart T. Smith,et al.  ELLIPTICAL FLEXURE HINGES , 1997 .

[4]  U. Brand,et al.  In-situ nondestructive characterization of the normal spring constant of AFM cantilevers , 2014 .

[5]  B G De Grooth,et al.  Biomolecular interactions measured by atomic force microscopy. , 2000, Biophysical journal.

[6]  Yon-Kyu Park,et al.  SI-traceable determination of spring constants of various atomic force microscope cantilevers with a small uncertainty of 1% , 2007 .

[7]  Jon R. Pratt,et al.  The NIST microforce realization and measurement project , 2002, Conference Digest Conference on Precision Electromagnetic Measurements.

[8]  John Hedley,et al.  Quantitative analytical atomic force microscopy: a cantilever reference device for easy and accurate AFM spring-constant calibration , 2004 .

[9]  Sheau-Shi Pan,et al.  A force measurement system based on an electrostatic sensing and actuating technique for calibrating force in a micronewton range with a resolution of nanonewton scale , 2011 .

[10]  V. Nesterov,et al.  Facility and methods for the measurement of micro and nano forces in the range below 10?5 N with a resolution of 10?12 N (development concept) , 2007 .

[11]  Sheng-Jui Chen,et al.  CHARACTERIZING THE MASS/FORCE MEASUREMENT CAPABILITY OF A MICROBALANCE , 2013 .

[12]  P. Zhdan,et al.  Calibration of AFM cantilever stiffness: a microfabricated array of reflective springs. , 2004, Ultramicroscopy.

[13]  Jon R. Pratt,et al.  SI Realization of Small Forces Using an Electrostatic Force Balance | NIST , 2006 .

[14]  C. Clifford,et al.  Cantilever Spring-Constant Calibration in Atomic Force Microscopy , 2008 .

[15]  Uwe Brand,et al.  Report on the first international comparison of small force facilities: a pilot study at the micronewton level , 2012 .

[16]  Jon R. Pratt,et al.  Review of SI traceable force metrology for instrumented indentation and atomic force microscopy , 2005 .

[17]  Yon-Kyu Park,et al.  Quantum-based mechanical force realization in piconewton range , 2007 .

[18]  John Hedley,et al.  Accurate analytical measurements in the atomic force microscope: a microfabricated spring constant standard potentially traceable to the SI , 2003, Nanotechnology.

[19]  Liam Blunt,et al.  Recent advances in traceable nanoscale dimension and force metrology in the UK , 2006 .

[20]  R. Steiner.  History and progress on accurate measurements of the Planck constant , 2013, Reports on progress in physics. Physical Society.

[21]  Shengwang Du,et al.  Discussion and Outlook , 2013 .

[22]  P. Cumpson,et al.  A compact torsional reference device for easy, accurate and traceable AFM piconewton calibration , 2013, Nanotechnology.