Design, construction and performance of a large tornado simulator for wind engineering applications

Abstract A laboratory tornado simulator was designed, constructed and tested to generate tornado-like vortices for the purpose of quantifying tornado-induced aerodynamic loads on civil engineering structures. This simulator generates a vortex that can translate along a ground plane to interact with models of structures on the ground. The simulator uses a “rotating forced downdraft” technique that loosely matches the rear flank downdraft (RFD) phenomenon often emphasized as important to tornadogenesis. The rotating forced downdraft is generated using a 1.83 m diameter fan and an annular duct suspended from an overhead crane that can translate along a 10.4 m ground plane. Measurements were conducted to quantify the simulator’s flow structures. An 18-hole pressure probe was used to traverse and map the vortex flow field. The flow structures of the vortices were validated by comparing with mobile Doppler radar observations of two major tornados. Results show that tornado vortex radii from 0.23 to 0.56 m can be generated. A wide range of maximum tangential velocities are also possible (from 6.9 to 14.5 m/s). The simulator generates a range of vortex structures from single-celled vortices to two-celled vortices with corresponding swirl ratios ranging from 0.08 to 1.14. Comparisons of general flow structure and normalized profiles of tangential velocity showed excellent match between simulator and radar data. The range of tornado sizes together with model structures of 1/100 to 1/500 scale will allow extensive examination of tornado-induced wind loads on terrestrial structures. The effects of a tornado’s size, translation speed and detailed flow structure on these loads can now be studied.

[1]  M. C. Jischke,et al.  Laboratory simulation of tornadic wind loads on a rectangular model structure , 1983 .

[2]  John T. Snow,et al.  Tornado Vortex Simulation at Purdue University , 1977 .

[3]  Andrew L. Pazmany,et al.  Observations of Tornadoes and Other Convective Phenomena with a Mobile, 3-mm Wavelength, Doppler Radar: The Spring 1999 Field Experiment , 2000 .

[4]  Brian H. Fiedler,et al.  The thermodynamic speed limit and its violation in axisymmetric numerical simulations of tornado‐like vortices , 1994 .

[5]  Richard Rotunno,et al.  A Study in Tornado-Like Vortex Dynamics , 1979 .

[6]  Neil B. Ward,et al.  The Exploration of Certain Features of Tornado Dynamics Using a Laboratory Model , 1972 .

[7]  P. Markowski.  Hook Echoes and Rear-Flank Downdrafts: A Review , 2002 .

[8]  Swarndeep Gill,et al.  Finescale Radar Observations of the Dimmitt, Texas (2 June 1995), Tornado , 2000 .

[9]  Curtis R. Alexander,et al.  The 30 May 1998 Spencer, South Dakota, Storm. Part I: The Structural Evolution and Environment of the Tornadoes , 2005 .

[10]  W. S. Lewellen,et al.  Large-Eddy Simulation of a Tornado’s Interaction with the Surface , 1997 .

[11]  W. S. Lewellen,et al.  Near-Surface Intensification of Tornado Vortices , 2007 .

[12]  J. Xia,et al.  The Influence of a Local Swirl Ratio on Tornado Intensification near the Surface , 2000 .

[13]  Charles A. Doswell,et al.  The Tornado : its structure, dynamics, prediction, and hazards , 1993 .

[14]  Brian F. Farrell,et al.  The Structure and Dynamics of Tornado-Like Vortices , 1999 .

[15]  Chris Letchford,et al.  Comparison of pressure distribution on a cubical model in boundary layer and tornado-like flow fields , 2005 .

[16]  Erik N. Rasmussen,et al.  Verification of the Origins of Rotation in Tornadoes Experiment: VORTEX , 1994 .

[17]  Curtis R. Alexander,et al.  The 30 May 1998 Spencer, South Dakota, Storm. Part II: Comparison of Observed Damage and Radar-Derived Winds in the Tornadoes , 2005 .

[18]  John T. Snow,et al.  Characteristics of Tornado-Like Vortices as a Function of Swirl Ratio: A Laboratory Investigation , 1979 .

[19]  Chris J. Diamond,et al.  Translation Effects on Simulated Tornadoes , 1984 .

[20]  Richard Rotunno,et al.  A comparative study of atmospheric and laboratory-analogue numerical tornado-vortex models , 2006 .

[21]  Robert Davies-Jones,et al.  The Dependence of Core Radius on Swirl Ratio in a Tornado Simulator , 1973 .

[22]  Timothy M. Samaras,et al.  Measuring Tornado Dynamics with In-Situ Instrumentation , 2006 .

[23]  Fred W. Leslie,et al.  Surface Roughness Effects on Suction Vortex Formation: A Laboratory Simulation , 1977 .