Research on motion characteristics of space truss-crawling robot

For the future demands of unmanned assembly of orbital space truss structures, a new space truss-crawling robot based on biomimetic principles is proposed. The robot system mainly consists of multi-joint legs and an adhesive microstructure imitating a gecko. The kinematics analysis of a single leg and the system design are accomplished based on functional requirements and adaptivity analysis. The motion simulation model of the robot and the discrete element simulation model of the adhesion microstructure are established based upon this analysis. The simulation of the holding motion of a single leg is implemented based on the EDEM-ADAMS platform, and the feasibility of the scheme is demonstrated by analyzing the influence of adhesive microstructures comparatively. The related motion characteristics of the robot while crawling are obtained by co-simulation, and the influence law analysis is carried out by analyzing the interaction between not only the crawling infrastructure but also the crawling gait and motion characteristics. A crawling experiment in a simulated low-gravity environment is conducted to further verify the robot’s movement function, which will provide beneficial reference for practical applications of the robot in the future.

[1]  Thomas W. Kenny,et al.  Independent detection of vertical and lateral forces with a sidewall-implanted dual-axis piezoresistive cantilever , 1998 .

[2]  Jun Young Chung,et al.  Roles of discontinuities in bio-inspired adhesive pads , 2005, Journal of The Royal Society Interface.

[3]  A. Saunders,et al.  The RiSE climbing robot: body and leg design , 2006, SPIE Defense + Commercial Sensing.

[4]  Mark R. Cutkosky,et al.  Scaling walls: Applying dry adhesives to the real world , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  Daniel E. Koditschek,et al.  Rapid pole climbing with a quadrupedal robot , 2009, 2009 IEEE International Conference on Robotics and Automation.

[6]  Peng Gao,et al.  Gait planning for a multi-motion mode wheel-legged hexapod robot , 2016, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[7]  R. Full,et al.  Evidence for van der Waals adhesion in gecko setae , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[8]  Thejus Pathmakumar,et al.  Design and Implementation of a Shape Shifting Rolling–Crawling–Wall-Climbing Robot , 2017 .

[9]  Mark R. Cutkosky,et al.  Smooth Vertical Surface Climbing With Directional Adhesion , 2008, IEEE Transactions on Robotics.

[10]  Charles F. Lillie,et al.  On-Orbit Assembly and Servicing for Future Space Observatories , 2006 .

[11]  Hanspeter A. Mallot,et al.  Biomimetic robot navigation , 2000, Robotics Auton. Syst..

[12]  Robert P. Hoyt.  SpiderFab: An Architecture for Self-Fabricating Space Systems , 2013 .

[13]  Gang Chen,et al.  Tripod gait-based turning gait of a six-legged walking robot , 2017 .

[14]  Navinda Kottege,et al.  Energetics-informed hexapod gait transitions across terrains , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[15]  William Whittaker,et al.  Skyworker: a robot for assembly, inspection and maintenance of large scale orbital facilities , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[16]  Bharat Bhushan,et al.  Fabrication and characterization of hierarchical nanostructured smart adhesion surfaces. , 2012, Journal of colloid and interface science.

[17]  Carlo Menon,et al.  Abigaille-III: A Versatile, Bioinspired Hexapod for Scaling Smooth Vertical Surfaces , 2014 .

[18]  Frederick Tasker,et al.  Managing Contact Dynamics for Orbital Robotic Servicing Missions , 2008 .

[19]  Harald Kruggel-Emden,et al.  Applicable Contact Force Models for the Discrete Element Method: The Single Particle Perspective , 2009 .