Effect of wall construction materials over indoor air quality in humid and hot climate

Abstract In the present research work, a mix of 15 modern and old office buildings were sampled and classified in accordance with their building construction materials, along with the indoor ambience conditions. From this hourly study, it was found that the season was not the more important parameter, despite there being a tendency towards a similar kind of ambience during the rainy season. On the other hand, it showed a clear difference between modern and old buildings with plaster coating, during the period of occupation. Specifically, a better indoor ambience prevailed in the old buildings. At the same time, when marble and plaster coatings were analysed in the old buildings, a clear difference in indoor ambience was felt at the time of opening the office. This shows that a better indoor ambience prevailed during the dry period in the old buildings when marble coatings were used. Finally, the same effect, but not as pronounced, seen in the indoor ambience during the opening of the office, was obtained in new buildings that had marble coating. Finally, the procedure obtained could be the much sought-after solution to the problem stated by researchers in the past and future research works relating to this new methodology could help us define the optimal improvement in real buildings to reduce energy consumption, and its related carbon dioxide emissions, at minimal economical cost.

[1]  P. Fanger Moderate Thermal Environments Determination of the PMV and PPD Indices and Specification of the Conditions for Thermal Comfort , 1984 .

[2]  P. Fanger,et al.  Upper limits of air humidity for preventing warm respiratory discomfort , 1998 .

[3]  Armando C. Oliveira,et al.  A field study on building inertia and its effects on indoor thermal environment , 2012 .

[4]  Standard Ashrae Thermal Environmental Conditions for Human Occupancy , 1992 .

[5]  Sabah A. Abdul-Wahab Al-Sulaiman Sick Building Syndrome , 2011 .

[6]  C. Simonson,et al.  Improving indoor climate and comfort with wooden structures , 2001 .

[7]  José A. Orosa,et al.  A new thermal comfort approach comparing adaptive and PMV models , 2011 .

[8]  José A. Orosa,et al.  Hourly indoor thermal comfort and air quality acceptance with passive climate control methods , 2009 .

[9]  P. Fanger,et al.  Upper limits for indoor air humidity to avoid uncomfortably humid skin , 1998 .

[10]  Armando C. Oliveira,et al.  Passive Methods as a Solution for Improving Indoor Environments , 2011 .

[11]  Prabal Talukdar,et al.  An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part I: Experimental facility and material property data , 2007 .

[12]  C. Simonson,et al.  The effect of structures on indoor humidity--possibility to improve comfort and perceived air quality. , 2002, Indoor air.

[13]  Nuno M.M. Ramos,et al.  EXPERIMENTAL QUANTIFICATION OF THE OPERATIVE TIME OF A PASSIVE HVAC SYSTEM USING POROUS COVERING MATERIALS , 2010 .