Studying the thermo-oxidative stability of chars using pyrolysis-combustion flow calorimetry
暂无分享,去创建一个
J. Roux | R. Sonnier | P. Mutin | J. Alauzun | H. Vahabi | A. Evstratov | B. Otazaghine | A. Viretto | C. Presti | L. Dumazert | Cai Heruijing
[1] R. Sonnier,et al. Thermal degradation of polyesters filled with magnesium dihydroxide and magnesium oxide , 2016 .
[2] É. Guillaume,et al. Influence of reaction mechanism accuracy on the chemical reactivity prediction of complex charring material in fire condition , 2016 .
[3] M. Döring,et al. Flame Retardancy of Polymers: The Role of Specific Reactions in the Condensed Phase , 2016 .
[4] R. Sonnier,et al. Improving the flame retardancy of flax fabrics by radiation grafting of phosphorus compounds , 2015 .
[5] F. Wang,et al. Effects of oxygen on the structure and reactivity of char during steam gasification of Shengli brown coal , 2015 .
[6] R. Sonnier,et al. Influence of organophosphorous silica precursor on the thermal and fire behaviour of a PA66/PA6 copolymer , 2015 .
[7] R. Sonnier,et al. Synthesis of a new organophosphorous alkoxysilane precursor and its effect on the thermal and fire behavior of a PA66/PA6 copolymer , 2015 .
[8] Yongqian Shi,et al. MoS2 nanolayers grown on carbon nanotubes: an advanced reinforcement for epoxy composites. , 2015, ACS applied materials & interfaces.
[9] R. N. Walters,et al. A microscale combustion calorimeter study of gas phase combustion of polymers , 2015 .
[10] R. Sonnier,et al. Synthesis of biobased phosphate flame retardants , 2014 .
[11] V. Sahajwalla,et al. Study of structural evolution of chars during rapid pyrolysis of waste CDs at different temperatures , 2014 .
[12] Yu-Zhong Wang,et al. Flame retardation of polypropylene via a novel intumescent flame retardant: Ethylenediamine-modified ammonium polyphosphate , 2014 .
[13] Yu-Zhong Wang,et al. An efficient mono-component polymeric intumescent flame retardant for polypropylene: preparation and application. , 2014, ACS applied materials & interfaces.
[14] P. Mutin,et al. Improvement of the Oxidative Stability of Nanodiamonds by Surface Phosphorylation , 2013 .
[15] Eric Guillaume,et al. Existence and uniqueness of solutions of a differential equation system modeling the thermal decomposition of polymer materials , 2013 .
[16] Fei You,et al. The Effects of Oxygen Contents and Heating Rates on Characteristics of Pyrolysis Prior to Smoldering of Flexible Polyurethane Foam , 2013 .
[17] R. Sonnier,et al. Barrier effect of flame retardant systems in poly(methyl methacrylate): Study of the efficiency of the surface treatment by octylsilane of silica nanoparticles in combination with phosphorous fire retardant additives , 2012 .
[18] J. Gilman,et al. Heat release and structural collapse of flexible polyurethane foam , 2010 .
[19] B. Schartel,et al. Fire retardancy mechanisms of arylphosphates in polycarbonate (PC) and PC/acrylonitrile-butadiene-styrene , 2009 .
[20] R. Kozłowski,et al. Flammability and fire resistance of composites reinforced by natural fibers , 2008 .
[21] A. Fernandez-Pello,et al. Application of genetic algorithms and thermogravimetry to determine the kinetics of polyurethane foam in smoldering combustion , 2006 .
[22] Als Nscort. Estimation of Rate of Heat Release by Means of Oxygen Consumption Measurements , 2003 .
[23] V. Sahajwalla,et al. Char structural ordering during pyrolysis and combustion and its influence on char reactivity , 2002 .
[24] V. Sahajwalla,et al. Quantitative X-ray diffraction analysis and its application to various coals , 2001 .
[25] H. Ismail,et al. ACETYLATED PLANT-FIBER-REINFORCED POLYESTER COMPOSITES: A STUDY OF MECHANICAL, HYGROTHERMAL, AND AGING CHARACTERISTICS , 2000 .
[26] J. Gibbins,et al. Structural ordering in high temperature coal chars and the effect on reactivity , 1999 .
[27] A. M. Rao,et al. Diameter-Selective Raman Scattering from Vibrational Modes in Carbon Nanotubes , 1997, Science.
[28] Bodil Engberg Pallesen,et al. The quality of combine-harvested fibre flax for industrials purposes depends on the degree of retting , 1996 .
[29] R. Kandiyoti,et al. Combustion reactivity and morphological change in coal chars: Effect of pyrolysis temperature, heating rate and pressure , 1996 .
[30] R. Hurt,et al. Evolution of char chemistry, crystallinity, and ultrafine structure during pulverized-coal combustion☆☆☆ , 1995 .
[31] K. M. Mcdonald,et al. Low temperature char oxidation kinetics: effect of preparation method , 1992 .
[32] L. Smoot,et al. Relation between reactivity and structure for coals and chars , 1991 .
[33] R. L. Taylor,et al. An update on the carbon-oxygen reaction , 1991 .
[34] B. Kokta,et al. Influence of coupling agents and treatments on the mechanical properties of cellulose fiber–polystyrene composites , 1989 .
[35] P. Walker,et al. Reactivities of chars obtained as residues in selected coal conversion processes , 1984 .
[36] Terry Wall,et al. Intrinsic reactivity of carbons to oxygen , 1983 .
[37] F. Schoening. X-ray structural parameter for coal , 1982 .
[38] Ralph J. Tyler,et al. Internal burning of pulverized semi-anthracite: the relation between particle structure and reactivity , 1972 .