论文信息 - Novel universal current-mode filters using unity-gain cells

Novel universal current-mode filters using unity-gain cells

Two novel universal current-mode filters using unity-gain current followers (CFs) and voltage followers (VFs) are presented. The first one, employing three CFs, one VF, two grounded capacitors and two resistors, has two inputs and three outputs. The second one, employing only two CFs, one VF, two grounded capacitors and two resistors, has four inputs and a single output. Both proposed circuits oOEer the following advantageous features: universal current-mode filter realization from the same configuration, no requirements of component matching conditions, employment of two grounded capacitors ideal for integration, employment of two virtually grounded resistors good for voltage control, easy adjustment of ω0/Q and ω0 through separate virtually grounded resistors and low active and passive sensitivity performance.

[1] Edgar Sánchez-Sinencio,et al. Two approaches for current-mode filters using voltage follower and transconductance multipliers building blocks , 1994, Proceedings of IEEE International Symposium on Circuits and Systems - ISCAS '94.

[2] Yannis Papananos,et al. Continuous-time filters using buffers with gain lower than unity , 1994 .

[3] Ro-Min Weng,et al. Novel universal biquad filters using only three followers , 1997 .

[4] Oguzhan Cicekoglu,et al. High output impedance current-mode multifunction filter with minimum number of active and reduced number of passive elements , 1998 .

[5] Raj Senani,et al. A simple configuration for realizing voltage-controlled impedances , 1992 .

[6] Santiago Celma,et al. Universal filter using unity-gain cells , 1995 .

[7] David J. Allstot,et al. Fully balanced CMOS current-mode circuits , 1993 .

[8] Kirat Pal,et al. Inductorless current conveyor allpass filter using grounded capacitors , 1982 .

[9] Muhammad Taher Abuelma'atti,et al. Current-mode universal filters using unity-gain cells , 1996 .