Microfluidic assembly blocks.

An assembly approach for microdevice construction using prefabricated microfluidic components is presented. Although microfluidic systems are convenient platforms for biological assays, their use in the life sciences is still limited mainly due to the high-level fabrication expertise required for construction. This approach involves prefabrication of individual microfluidic assembly blocks (MABs) in PDMS that can be readily assembled to form microfluidic systems. Non-expert users can assemble the blocks on glass slides to build their devices in minutes without any fabrication steps. In this paper, we describe the construction and assembly of the devices using the MAB methodology, and demonstrate common microfluidic applications including laminar flow development, valve control, and cell culture.

[1]  George M Whitesides,et al.  Prototyping of microfluidic devices in poly(dimethylsiloxane) using solid-object printing. , 2002, Analytical chemistry.

[2]  Brian N. Johnson,et al.  An integrated nanoliter DNA analysis device. , 1998, Science.

[3]  G. Whitesides.  The origins and the future of microfluidics , 2006, Nature.

[4]  Mark A. Burns.  Everyone's a (Future) Chemist , 2002, Science.

[5]  M. Ladisch,et al.  Poly(dimethylsiloxane) (PDMS) and Silicon Hybrid Biochip for Bacterial Culture , 2003 .

[6]  Brian N. Johnson,et al.  An integrated microfluidic device for influenza and other genetic analyses. , 2005, Lab on a chip.

[7]  C. O'Mathúna,et al.  Rapid fabrication of microfluidic devices in poly(dimethylsiloxane) by photocopying. , 2001, Lab on a chip.

[8]  P. Grodzinski,et al.  A Modular Microfluidic System for Cell Pre-concentration and Genetic Sample Preparation , 2003 .

[9]  Kee Suk Ryu,et al.  A modular microfluidic architecture for integrated biochemical analysis. , 2005, Proceedings of the National Academy of Sciences of the United States of America.

[10]  Luke P. Lee,et al.  Shrinky-Dink microfluidics: rapid generation of deep and rounded patterns. , 2008, Lab on a chip.

[11]  Mark A Burns,et al.  Drop mixing in a microchannel for lab-on-a-chip platforms. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[12]  Sang Hoon Lee,et al.  Soft material-based microculture system having air permeable cover sheet for the protoplast culture of Nicotiana tabacum , 2006, Bioprocess and biosystems engineering.

[13]  D. Beebe,et al.  Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer , 2000, Journal of Microelectromechanical Systems.

[14]  M. Holl,et al.  Microscale Bioanalytical Systems , 2002, Science.

[15]  G M Whitesides,et al.  Fabrication of topologically complex three-dimensional microfluidic systems in PDMS by rapid prototyping. , 2000, Analytical chemistry.

[16]  Kang Wang,et al.  Rapid method for design and fabrication of passive micromixers in microfluidic devices using a direct-printing process. , 2005, Lab on a chip.

[17]  Albert Folch,et al.  Parallel mixing of photolithographically defined nanoliter volumes using elastomeric microvalve arrays , 2005, Electrophoresis.

[18]  K. Jensen,et al.  Cells on chips , 2006, Nature.

[19]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.