Micro mechanics of isotropic normal compression

Discrete element modelling has been used to investigate the micro mechanics of isotropic normal compression. One-dimensional (1D) normal compression has previously been modelled in three dimensions using an oedometer and a large number of particles and without the use of agglomerates, and it was shown that the compression index was solely related to the strengths of the particles as a function of size. The same procedure is used here to model isotropic normal compression. The fracture of a particle is governed by the octahedral shear stress within the particle (due to the multiple contacts) and a Weibull distribution of strengths. The octahedral shear stresses, due to local anisotropic stresses within a sample with isotropic boundary stresses, are shown to give rise to a normal compression line (NCL) and the evolution of a distribution of particle sizes. The compression line is parallel to the 1D NCL in log e–log p space, in agreement with traditional critical state soil mechanics and confirming that the compression index is solely a function of the size effect on average particle strength, which determines the hardening law for the material. The paper shows, for the first time, how local octahedral shear stresses induced in the particles within the sample generate an isotropic normal (clastic) compression line.

[1]  Da-Mang Lee.  Angles of friction of granular fills. , 1992 .

[2]  I. Einav,et al.  Force attractor in confined comminution of granular materials. , 2010, Physical review letters.

[3]  Glenn R. McDowell,et al.  On the micro mechanics of one-dimensional normal compression , 2013 .

[4]  Malcolm D. Bolton,et al.  On the micromechanics of crushable aggregates , 1998 .

[5]  Glenn R. McDowell,et al.  THE APPLICATION OF WEIBULL STATISTICS TO THE FRACTURE OF SOIL PARTICLES , 2000 .

[6]  Glenn R. McDowell,et al.  Discrete element modelling of soil particle fracture , 2002 .

[7]  Denis Vallet,et al.  Numerical model of crushing of grains inside two-dimensional granular materials , 1999 .

[8]  Hans J. Herrmann,et al.  Fragmentation of grains in a two-dimensional packing , 1998 .

[9]  Adrian R. Russell,et al.  Crushing of particles in idealised granular assemblies , 2009 .

[10]  Adrian R. Russell.  A compression line for soils with evolving particle and pore size distributions due to particle crushing , 2011 .

[11]  Malcolm D. Bolton,et al.  Micro- and macro-mechanical behaviour of DEM crushable materials , 2008 .

[12]  Glenn R. McDowell,et al.  Fractal compression of soil , 2001 .

[13]  M. Bolton,et al.  The fractal crushing of granular materials , 1996 .

[14]  G. McDowell,et al.  Discrete element modelling of railway ballast , 2005 .

[15]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[16]  Donald L. Turcotte,et al.  Fractals and fragmentation , 1986 .

[17]  J. C. Jaeger.  Failure of rocks under tensile conditions , 1967 .

[18]  Pierre-Yves Hicher,et al.  Experimental Data Highlighting the Role of Surface Fracture Energy in Quasi-Static Confined Comminution , 2013, International Journal of Fracture.

[19]  Y. Ta,et al.  Discrete element simulation of crushable soil , 2003 .

[20]  Glenn R. McDowell,et al.  A physical justification for log e–log σ based on fractal crushing and particle kinematics , 2005 .

[21]  Luis E. Vallejo,et al.  Crushing a weak granular material: experimental numerical analyses , 2005 .

[22]  Glenn R. McDowell,et al.  ON THE YIELDING AND PLASTIC COMPRESSION OF SAND , 2002 .

[23]  Itai Einav,et al.  The role of self-organization during confined comminution of granular materials , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.