Design Optimization and Fabrication of a Novel Structural SOI Piezoresistive Pressure Sensor with High Accuracy

This paper presents a novel structural piezoresistive pressure sensor with four-grooved membrane combined with rood beam to measure low pressure. In this investigation, the design, optimization, fabrication, and measurements of the sensor are involved. By analyzing the stress distribution and deflection of sensitive elements using finite element method, a novel structure featuring high concentrated stress profile (HCSP) and locally stiffened membrane (LSM) is built. Curve fittings of the mechanical stress and deflection based on FEM simulation results are performed to establish the relationship between mechanical performance and structure dimension. A combination of FEM and curve fitting method is carried out to determine the structural dimensions. The optimized sensor chip is fabricated on a SOI wafer by traditional MEMS bulk-micromachining and anodic bonding technology. When the applied pressure is 1 psi, the sensor achieves a sensitivity of 30.9 mV/V/psi, a pressure nonlinearity of 0.21% FSS and an accuracy of 0.30%, and thereby the contradiction between sensitivity and linearity is alleviated. In terms of size, accuracy and high temperature characteristic, the proposed sensor is a proper choice for measuring pressure of less than 1 psi.

[1]  Yulong Zhao,et al.  The novel structural design for pressure sensors , 2010 .

[2]  Chan Gook Park,et al.  Design of a MEMS piezoresistive differential pressure sensor with small thermal hysteresis for air data modules. , 2015, The Review of scientific instruments.

[3]  Li Xin,et al.  High-temperature piezoresistive pressure sensor based on implantation of oxygen into silicon wafer , 2012 .

[4]  Olga Troynikov,et al.  Flexible Sensors for Pressure Therapy: Effect of Substrate Curvature and Stiffness on Sensor Performance , 2017, Sensors.

[5]  Yan Liu,et al.  Realization of a micro pressure sensor with high sensitivity and overload by introducing beams and Islands , 2015 .

[6]  Josep Samitier,et al.  High-performance piezoresistive pressure sensors for biomedical applications using very thin structured membranes , 1996 .

[7]  Zhuangde Jiang,et al.  High temperature and frequency pressure sensor based on silicon-on-insulator layers , 2006 .

[8]  Zhuangde Jiang,et al.  The design and analysis of beam-membrane structure sensors for micro-pressure measurement. , 2012, The Review of scientific instruments.

[9]  Jie Yang,et al.  A Harsh Environment Wireless Pressure Sensing Solution Utilizing High Temperature Electronics , 2013, Sensors.

[10]  Ha-Duong Ngo,et al.  SOI-based, High Reliable Pressure Sensor with Floating Concept for High Temperature Applications☆ , 2014 .

[11]  Xiaowei Liu,et al.  Piezoresistive Sensitivity, Linearity and Resistance Time Drift of Polysilicon Nanofilms with Different Deposition Temperatures , 2009, Sensors.

[12]  Xian Huang,et al.  A high sensitivity and high linearity pressure sensor based on a peninsula-structured diaphragm for low-pressure ranges , 2014 .

[13]  S. Varghese,et al.  Fabrication of electron beam physical vapor deposited polysilicon piezoresistive MEMS pressure sensor , 2015 .

[14]  Bin Zhang,et al.  A High-Temperature Piezoresistive Pressure Sensor with an Integrated Signal-Conditioning Circuit , 2016, Sensors.

[15]  Yulong Zhao,et al.  Geometry optimization for micro-pressure sensor considering dynamic interference. , 2014, The Review of scientific instruments.

[16]  Jürgen Wilde,et al.  Impact of high-g and high vibration environments on piezoresistive pressure sensor performance , 2009 .

[17]  Kuo-Ning Chiang,et al.  Sensitivity analysis of packaging effect of silicon-based piezoresistive pressure sensor , 2009 .

[18]  Yulong Zhao,et al.  A Smart High Accuracy Silicon Piezoresistive Pressure Sensor Temperature Compensation System , 2014, Sensors.

[19]  Yulong Zhao,et al.  Design optimization of high pressure and high temperature piezoresistive pressure sensor for high sensitivity. , 2014, The Review of scientific instruments.

[20]  Mariana Amorim Fraga,et al.  Fabrication and characterization of a SiC/SiO2/Si piezoresistive pressure sensor , 2010 .

[21]  Yang Yu,et al.  Temperature characteristics research of SOI pressure sensor based on asymmetric base region transistor , 2017 .

[22]  Yulong Zhao,et al.  Note: High temperature pressure sensor for petroleum well based on silicon over insulator. , 2015, The Review of scientific instruments.

[23]  Zhuangde Jiang,et al.  A high sensitive pressure sensor with the novel bossed diaphragm combined with peninsula-island structure , 2016 .

[24]  Xu Yu,et al.  A bossed diaphragm piezoresistive pressure sensor with a peninsula–island structure for the ultra-low-pressure range with high sensitivity , 2016 .

[25]  Peter Kinnell,et al.  A hollow stiffening structure for low-pressure sensors , 2010 .

[26]  Liwei Lin,et al.  A simulation program for the sensitivity and linearity of piezoresistive pressure sensors , 1999 .

[27]  Min Li,et al.  Design Optimization and Fabrication of High-Sensitivity SOI Pressure Sensors with High Signal-to-Noise Ratios Based on Silicon Nanowire Piezoresistors , 2016, Micromachines.

[28]  Joshua E.-Y. Lee,et al.  Ambient temperature and bias conditions induced frequency drifts in an uncompensated SOI piezoresistive resonator , 2013 .

[29]  Huiyang Yu,et al.  Design and Application of a High Sensitivity Piezoresistive Pressure Sensor for Low Pressure Conditions , 2015, Sensors.

[30]  Yulong Zhao,et al.  The Design and Optimization of a Highly Sensitive and Overload-Resistant Piezoresistive Pressure Sensor , 2016, Sensors.

[31]  Walter Lang,et al.  Embedding Piezoresistive Pressure Sensors to Obtain Online Pressure Profiles Inside Fiber Composite Laminates , 2015, Sensors.

[32]  B. D. Pant,et al.  Design principles and considerations for the ‘ideal’ silicon piezoresistive pressure sensor: a focused review , 2014, Microsystem Technologies.

[33]  Beth L. Pruitt,et al.  Review: Semiconductor Piezoresistance for Microsystems , 2009, Proceedings of the IEEE.

[34]  Nguyen Binh-Khiem,et al.  High-sensitivity triaxial tactile sensor with elastic microstructures pressing on piezoresistive cantilevers , 2014 .

[35]  Zhuangde Jiang,et al.  Incorporation of beams into bossed diaphragm for a high sensitivity and overload micro pressure sensor. , 2013, The Review of scientific instruments.

[36]  K. Haenen,et al.  Design and fabrication of piezoresistive strain gauges based on nanocrystalline diamond layers , 2012 .

[37]  José Luis Ocaña,et al.  Design optimization and fabrication of a novel structural piezoresistive pressure sensor for micro-pressure measurement , 2018 .

[38]  D. Kwong,et al.  Annularly Grooved Diaphragm Pressure Sensor With Embedded Silicon Nanowires for Low Pressure Application , 2014, Journal of Microelectromechanical Systems.

[39]  Chao Meng,et al.  Fabrication and Structural Design of Micro Pressure Sensors for Tire Pressure Measurement Systems (TPMS) , 2009, Sensors.

[40]  Ha-Duong Ngo,et al.  Advanced Liquid-Free, Piezoresistive, SOI-Based Pressure Sensors for Measurements in Harsh Environments , 2015, Sensors.

[41]  Matthias Durr,et al.  Analysis And Design Principles Of Mems Devices , 2016 .

[42]  Akio Yasukawa,et al.  A special silicon diaphragm pressure sensor with high output and high accuracy , 1981 .

[43]  H. Sandmaier,et al.  A square-diaphragm piezoresistive pressure sensor with a rectangular central boss for low-pressure ranges , 1993 .