Heat Transfer Enhancement by Multilobe Vortex Generators: Effects of Lobe Parameters

A three-dimensional computational method is developed to study the flow and heat transfer in a circular tube with a multilobe vortex generator inserted. Governing equations are discretized by the finite volume technique. The irregular lobe geometry is treated using curvilinear nonstaggered grids. Examination of the flow field reveals that the radial and counterradial flows induced inside and outside the lobe are forced to form axial vortices downstream of the vortex generator. Because of the transport of the high-speed, low-temperature core flow toward the tube wall by the vortex, heat transfer is enhanced. Also because of the vortex flow, the high-temperature wall flow is carried away from the wall to mix with the low-temperature core flow. Consequently, very effective augmentation in the heat transfer and mixing of flow temperature results. It is shown also that since the slope of the lobe is increased by enlarging the lobe penetration, reducing the lobe length, and making a concave contour geometry, th...

[1]  C. Rhie,et al.  Numerical Study of the Turbulent Flow Past an Airfoil with Trailing Edge Separation , 1983 .

[2]  Wu-Shung Fu,et al.  Experimental study of the heat transfer enhancement of an outer tube with an inner-tube insertion , 1995 .

[3]  P. Shumpert.  An experimental model investigation of turbofan engine internal exhaust gas mixer configurations , 1980 .

[4]  FLOW MODELING IN TURBOFAN MIXING DUCT , 1994 .

[5]  R. L. Sorenson,et al.  Automatic mesh-point clustering near a boundary in grid generation with elliptic partial differential equations , 1979 .

[6]  M. J. Scott,et al.  A Parametric Analysis of the Performance of Internally Finned Tubes for Heat Exchanger Application , 1980 .

[7]  HEAT TRANSFER ENHANCEMENT BY A MULTILOBE VORTEX GENERATOR IN INTERNALLY FINNED TUBES , 1999 .

[8]  R. Webb.  Principles of Enhanced Heat Transfer , 1994 .

[9]  A. W. Date,et al.  Prediction of fully-developed flow in a tube containing a twisted-tape , 1974 .

[10]  R. J. Goldstein,et al.  Heat transfer and friction in tubes with repeated-rib roughness , 1971 .

[11]  A. E. Bergles,et al.  Heat Transfer and Pressure Drop in Tape-Generated Swirl Flow of Single-Phase Water , 1969 .

[12]  Suhas V. Patankar,et al.  Analysis of laminar flow and heat transfer in tubes with internal circumferential fins , 1984 .

[13]  Joe F. Thompson,et al.  Numerical grid generation: Foundations and applications , 1985 .

[14]  Y. Tsui,et al.  Investigation of the mixing flow structure in multilobe mixers , 1996 .

[15]  H. Auracher,et al.  Book reviewPrinciples of Enhanced Heat Transfer: Ralph L. Webb John Wiley & Sons, Inc. (1994) 576 pp, 70, $98, ISBN 0 47157778 2 , 1995 .

[16]  R. Webb,et al.  Forced convection heat transfer in helically rib-roughened tubes , 1980 .

[17]  R. W. Paterson,et al.  Turbofan Mixer Nozzle Flow Field—A Benchmark Experimental Study , 1984 .

[18]  A. Date,et al.  Friction and Heat Transfer Characteristics of Helical Turbulent Air Flow in Annuli , 1989 .

[19]  Yeng-Yung Tsui,et al.  A STUDY OF UPSTREAM-WEIGHTED HIGH-ORDER DIFFERENCING FOR APPROXIMATION TO FLOW CONVECTION , 1991 .

[20]  A. Bejan.  Convection Heat Transfer , 1984 .

[21]  Wu-Shung Fu,et al.  ENHANCEMENT OF HEAT-TRANSFER FOR A TUBE WITH AN INNER TUBE INSERTION , 1994 .

[22]  R. Sethumadhavan,et al.  Turbulent flow heat transfer and fluid friction in helical-wire-coil-inserted tubes , 1983 .

[23]  D. C. McCormick,et al.  Vortical and turbulent structure of a lobed mixer free shear layer , 1993 .

[24]  C. Rhie,et al.  A numerical study of the turbulent flow past an isolated airfoil with trailing edge separation , 1982 .

[25]  M. Peric.  ANALYSIS OF PRESSURE-VELOCITY COUPLING ON NONORTHOGONAL GRIDS , 1990 .