Sputtered nanocrystalline ceramic TiC/amorphous C thin films as potential materials for medical applications

[1]  Hsien-Nan Kuo,et al.  Interaction of progenitor bone cells with different surface modifications of titanium implant. , 2014, Materials science & engineering. C, Materials for biological applications.

[2]  A. Ramalho,et al.  Dry sliding and tribocorrosion behaviour of hot pressed CoCrMo biomedical alloy as compared with the cast CoCrMo and Ti6Al4V alloys , 2013 .

[3]  Penghui Li,et al.  Surface nano-architectures and their effects on the mechanical properties and corrosion behavior of Ti-based orthopedic implants , 2013 .

[4]  C. Balázsi,et al.  Structural, mechanical and biological comparison of TiC and TiCN nanocomposites films , 2013 .

[5]  Ruizhen Xu,et al.  Structure and corrosion resistance of Ti/TiC coatings fabricated by plasma immersion ion implantation and deposition on nickel-titanium , 2013 .

[6]  Geetha Manivasagam,et al.  Studies on corrosion and wear behavior of submicrometric diamond coated Ti alloys , 2013 .

[7]  F. Devesa,et al.  Influence of fabrication process on electrochemical and surface properties of Ti–6Al–4V alloy for medical applications , 2013 .

[8]  Mitsuo Niinomi,et al.  Biocompatibility of Ti-alloys for long-term implantation. , 2013, Journal of the mechanical behavior of biomedical materials.

[9]  Joshua Jacobs,et al.  CoCrMo metal-on-metal hip replacements. , 2013, Physical chemistry chemical physics : PCCP.

[10]  G. Radnóczi,et al.  Mechanical Behavior of Bioactive TiC Nanocomposite Thin Films , 2012 .

[11]  S. Spriano,et al.  Characterization of Co-Cr-Mo alloys after a thermal treatment for high wear resistance. , 2012, Materials science & engineering. C, Materials for biological applications.

[12]  H. T. Liu,et al.  Corrosion and ion release behavior of Cu/Ti film prepared via physical vapor deposition in vitro as potential biomaterials for cardiovascular devices , 2012 .

[13]  F. Karimzadeh,et al.  Formation mechanism and characterization of nanostructured Ti6Al4V alloy prepared by mechanical alloying , 2012 .

[14]  G. Radnóczi,et al.  Electron Diffraction Based Analysis of Phase Fractions and Texture in Nanocrystalline Thin Films, Part III: Application Examples , 2012, Microscopy and Microanalysis.

[15]  Zongtao Zhang,et al.  Electrochemical investigation of chromium oxide-coated Ti-6Al-4V and Co-Cr-Mo alloy substrates. , 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

[16]  Hua-Xin Peng,et al.  In situ TiC particles reinforced Ti6Al4V matrix composite with a network reinforcement architecture , 2011 .

[17]  G. Radnóczi,et al.  Carbon-metal (Ni or Ti) nanocomposite thin films for functional applications , 2009 .

[18]  J. Lábár.  Electron Diffraction Based Analysis of Phase Fractions and Texture in Nanocrystalline Thin Films, Part II: Implementation , 2009, Microscopy and Microanalysis.

[19]  Yoshimitsu Okazaki,et al.  Metal release from stainless steel, Co-Cr-Mo-Ni-Fe and Ni-Ti alloys in vascular implants , 2008 .

[20]  J. Lábár.  Electron Diffraction Based Analysis of Phase Fractions and Texture in Nanocrystalline Thin Films, Part I: Principles , 2008, Microscopy and Microanalysis.

[21]  R. Caram,et al.  Development of Ti-Mo alloys for biomedical applications: Microstructure and electrochemical characterization , 2007 .

[22]  C. A. Huang,et al.  Electrochemical corrosion studies on Co–Cr–Mo implant alloy in biological solutions , 2005 .

[23]  J. Lábár.  Consistent indexing of a (set of) single crystal SAED pattern(s) with the ProcessDiffraction program. , 2005, Ultramicroscopy.

[24]  C. Huang,et al.  Investigation on the corrosion behavior of Ti–6Al–4V implant alloy by electrochemical techniques , 2004 .

[25]  I. Gurrappa,et al.  Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications , 2003 .

[26]  I. Gurappa.  Characterization of different materials for corrosion resistance under simulated body fluid conditions , 2002 .

[27]  Y. Okazaki.  Effect of friction on anodic polarization properties of metallic biomaterials. , 2002, Biomaterials.

[28]  J. González,et al.  Study of the corrosion behavior of titanium and some of its alloys for biomedical and dental implant applications , 1999 .

[29]  T. Hanawa.  In vivo metallic biomaterials and surface modification , 1999 .

[30]  Zongtao Zhang,et al.  Electrochemical investigation of chromium nanocarbide coated Ti–6Al–4V and Co–Cr–Mo alloy substrates , 2012 .

[31]  G. Radnóczi,et al.  Carbon - metal (Ni, Ti) nanocomposite films as protective coatings , 2008 .

[32]  F. Cui,et al.  Preparation of bioactive Ti6Al4V surfaces by a simple method. , 1998, Biomaterials.

[33]  A. Scarano,et al.  Direct bone formation on sand-blasted titanium implants: an experimental study. , 1996, Biomaterials.

[34]  A. Perry.  Ion Implantation of Titanium Alloys for Biomaterial and Other Applications , 1987 .