论文信息 - Procedure for the calibration of surface temperature sensors used in dimensional metrology

Procedure for the calibration of surface temperature sensors used in dimensional metrology

A procedure for the calibration of sensors used for the measurement of surface temperature in dimensional metrology is developed. It consists of the utilization of a climate chamber, with an aluminium block inside, to house reference and calibrating sensors. The temperature of the sensors is controlled by the climate chamber and uncertainties are reduced due to the utilization of the aluminium block. The method is demonstrated by comparing the results obtained with those of a water bath calibration.

[1] J. Ivarsson,et al. Interlaboratory Comparison of Reference Surface Temperature Apparatus at NMIs , 2008 .

[2] Tsutomu Nakanishi,et al. Evaluation of surface fatigue strength based on surface temperature: (Surface temperature calculation for rolling-sliding contact) , 2001 .

[3] E. Iso,et al. Measurement Uncertainty and Probability: Guide to the Expression of Uncertainty in Measurement , 1995 .

[4] H. G. Semerjian,et al. Temperature Metrology and Its Impact on Industry , 2003 .

[5] S. Standard. GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT , 2006 .

[6] J. Harding,et al. The measurement of specimen surface temperature in high-speed tension and torsion tests , 1998 .

[7] F. G. Keyes. Temperature—Its Measurement and Control in Science and Industry. , 1956 .

[8] James F. Schooley,et al. Temperature : its measurement and control in science and industry , 1992 .

[9] W. M. Dale. Temperature, Its Measurement and Control in Science and Industry , 1963 .