AROMATIC SATURATION OF DISTILLATES: AN OVERVIEW

Abstract The saturation of aromatic compounds in distillate fractions and in particular in diesel fuel has received considerable attention in recent years. A high aromatic content is associated with poor fuel quality, giving a low cetane number in diesel fuel and a high smoke point in jet fuel. There is also evidence that particulate emissions in diesel exhaust gases correlate with the aromatic content of the fuel. New legislation has been introduced to limit aromatics in diesel fuel and this has led to new catalyst and process developments for aromatic saturation. This paper gives an overview of these developments. The types of aromatic compounds found in distillate streams are described, and the kinetics of both single (model) compounds and groups of compounds as found in industrial feedstocks are discussed. Both supported metal sulfide and supported noble metal catalysts are used industrially and the paper outlines the role of the active species in these catalysts and compares reaction conditions used for each. The tolerance of different catalyst systems towards sulfur and nitrogen in the feed is dealt with in some detail. Commercial processes employ either single- or dual-stage catalyst systems depending on the nature of the aromatic saturation catalyst. The paper considers the merits of different process configurations. The paper concludes with a brief survey of possible future applications for distillate aromatic saturation catalysts.

[1]  P. Chou.  Benzene hydrogenation over supported and unsupported palladium: II. Reaction model , 1987 .

[2]  J. Fierro,et al.  Comparative Study of the Deactivation of Group Viii Metal Catalysts by Thiophene Poisoning in Ethylbenzene Hydrogenation , 1991 .

[3]  W. Sachtler,et al.  Electron-deficient palladium clusters and bifunctional sites in zeolites , 1992 .

[4]  R Westerholm,et al.  Exhaust emissions from light- and heavy-duty vehicles: chemical composition, impact of exhaust after treatment, and fuel parameters. , 1994, Environmental health perspectives.

[5]  J. F. Page,et al.  Activity and Selectivity of Hydrotreating Catalysts , 1970 .

[6]  M. Vannice,et al.  Toluene Hydrogenation Over Supported Platinum Catalysts , 1993 .

[7]  Vannice,et al.  Hydrogenation of aromatic hydrocarbons over supported Pt catalysts , 1993 .

[8]  M. Vasiurrahaman.  The hydrogenation of toluene and o-, m-, and p-xylene over palladium. II. Reaction model , 1991 .

[9]  J L Mauderly.  Toxicological and epidemiological evidence for health risks from inhaled engine emissions. , 1994, Environmental health perspectives.

[10]  M. Vannice,et al.  Benzene hydrogenation over supported and unsupported palladium: I. Kinetic behavior , 1987 .

[11]  M. Vannice,et al.  Hydrogenation of Aromatic Hydrocarbons over Supported Pt Catalysts .III. Reaction Models for Metal Surfaces and Acidic Sites on Oxide Supports , 1993 .

[12]  A. Silvestri,et al.  Reaction paths for decyclization of methylcyclopentane over PtAl2O3 catalyst , 1971 .

[13]  J. Sinfelt,et al.  KINETICS OF METHYLCYCLOHEXANE DEHYDROGENATION OVER PT—Al2O3 , 1960 .

[14]  S. Jaffe.  Kinetics of Heat Release in Petroleum Hydrogenation , 1974 .

[15]  M Vasiurbahaman,et al.  The hydrogenation of toluene and o-, m-, and pxylene over palladium: I. Kinetic behavior and o-xylene isornerization , 1991 .

[16]  J. Curvers,et al.  Automated multidimensional gas chromatographic PNA analysis of hydrocarbon-type samples, PONA analysis using a reversible olefin trap , 1988 .

[17]  S. Ernst,et al.  The Influence of Hydrogen Sulfide in Hydrocracking of n-Dodecane over Palladium/Faujasite Catalysts , 1986 .

[18]  A. Stanislaus,et al.  Aromatic Hydrogenation Catalysis: A Review , 1994 .

[19]  Antonio Monzón,et al.  Deactivation model with residual activity to study thioresistance and thiotolerance of naphtha reforming catalysts , 1994 .

[20]  J. Scholten,et al.  The catalytic hydrogenation of benzene over supported metal catalysts , 1987 .

[21]  G.L.B. Thielemans,et al.  Deep desulphurisation and aromatics saturation for automotive gasoil manufacturing , 1993 .

[22]  W. Sachtler,et al.  Design of Metal Clusters in Nay Zeolite , 1989 .

[23]  W. Sachtler,et al.  Effect of zeolite protons on palladium-catalyzed hydrocarbon reactions , 1990 .

[24]  P. Steen,et al.  Selectivity to cyclohexene in the gas phase hydrogenation of benzene over ruthenium, as influenced by reaction modifiers: II. Catalytic hydrogenation of benzene to cyclohexene and cyclohexane , 1990 .

[25]  R. Westerholm,et al.  Impact of fuels on diesel exhaust emissions : A chemical and biological characterization , 1991 .

[26]  P. Gallezot,et al.  Reply to the comments of P. H. Lewis “net charge on platinum cluster incorporated in Y zeolite” , 1981 .

[27]  J. Barbier,et al.  Role of Sulfur in Catalytic Hydrogenation Reactions , 1990 .

[28]  M. Wilson,et al.  Hydrogenation of aromatic compounds in synthetic crude distillates catalyzed by sulfided NiWγ-Al2O3 , 1985 .

[29]  R.Z.C. van Meerten,et al.  Gas phase benzene hydrogenation on a nickel-silica catalyst: I. Experimental data and phenomenological description , 1975 .

[30]  A. Page.  Applied heterogeneous catalysis , 1988 .

[31]  Susan T. Bagley,et al.  A review of diesel particulate control technology and emission effects , 1994 .

[32]  M. Vannice,et al.  Hydrogenation of Aromatic Hydrocarbons over Supported Pt Catalysts .II. Toluene Hydrogenation , 1993 .

[33]  P. Gallezot,et al.  The State and Catalytic Properties of Platinum and Palladium in Faujasite-type Zeolites , 1979 .

[34]  A. Sapre,et al.  Hydrogenation of aromatic hydrocarbons catalyzed by sulfided cobalt oxide-molybdenum oxide/.alpha.-aluminum oxide. Reactivities and reaction networks , 1981 .

[35]  E. C. Sanford,et al.  Kinetics of aromatics hydrogenation of bitumen‐derived gas oils , 1991 .

[36]  R. Reid,et al.  The Properties of Gases and Liquids , 1977 .

[37]  T. Aczel,et al.  Polycyclic aromatic structure distributions by high-resolution mass spectrometry , 1991 .