Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

[1]  R. Zanino,et al.  Effect of Local Defects on HTS Fusion Magnets Performance , 2022, IEEE transactions on applied superconductivity.

[2]  R. Wesche,et al.  Assessment of the Thermal-Hydraulic Performance of the European DEMO NbTi Bus Bars , 2022, IEEE transactions on applied superconductivity.

[3]  L. Zani,et al.  Parametric study and optimization of the cryo-magnetic system for EU DEMO at the pre-conceptual design phase , 2022, Cryogenics.

[4]  M. Ganesh Kumar,et al.  The DEMO magnet system – Status and future challenges , 2021, Fusion Engineering and Design.

[5]  Mithlesh Kumar,et al.  A New Cabled Stabilizer for the Nb3Sn React&Wind DEMO Conductor Prototype , 2021, IEEE Transactions on Applied Superconductivity.

[6]  Rainer Wesche,et al.  A design proposal for the European DEMO superconducting bus bars and current leads , 2021 .

[7]  Mithlesh Kumar,et al.  Alternative PF Coil Winding Pack Design for the EU DEMO , 2021, IEEE Transactions on Applied Superconductivity.

[8]  P. Bruzzone,et al.  Parametric study of the TF coil design for the European DEMO , 2021 .

[9]  X. Sarasola,et al.  Quench analysis of the DEMO CS1 coil , 2020 .

[10]  E. Gaio,et al.  Advance in the conceptual design of the European DEMO magnet system , 2020, Superconductor Science and Technology.

[11]  P. Bruzzone,et al.  Hybrid HTS-Nb3Sn-NbTi DEMO CS coil design optimized for maximum magnetic flux generation , 2019, Fusion Engineering and Design.

[12]  R. Heller,et al.  Thermal-hydraulic analysis of an HTS DEMO TF coil , 2018, Cryogenics.

[13]  X. Sarasola,et al.  Thermal-Hydraulic Analysis of the DEMO CS Coil , 2018, IEEE Transactions on Applied Superconductivity.

[14]  P. Bruzzone,et al.  DEMO Central Solenoid Design Based on the Use of HTS Sections at Highest Magnetic Field , 2018, IEEE Transactions on Applied Superconductivity.

[15]  P. Bruzzone,et al.  Test of 60 kA coated conductor cable prototypes for fusion magnets , 2015 .

[16]  Kamil Sedlak,et al.  Thermal-Hydraulic Analysis of LTS Cables for the DEMO TF Coil , 2014 .

[17]  L. Bottura,et al.  $J_{C}(B,T,\varepsilon)$ Parameterization for the ITER ${\rm Nb}_{3}{\rm Sn}$ Production , 2009, IEEE Transactions on Applied Superconductivity.

[18]  Martin N. Wilson,et al.  NbTi superconductors with low ac loss: A review , 2008 .

[19]  P. Bruzzone,et al.  Test Results of a Large Size, Forced Flow Nb$_{3}$Sn Conductor, Based on a Design Alternative to the Cable-in-Conduit , 2007, IEEE Transactions on Applied Superconductivity.

[20]  L. Bottura,et al.  A practical fit for the critical surface of NbTi , 2000, IEEE Transactions on Applied Superconductivity.

[21]  P. Bruzzone,et al.  Preliminary Design of a High Current R&W TF Coil Conductor for the EU DEMO , 2022, IEEE transactions on applied superconductivity.

[22]  L. Zani,et al.  Strategy for Developing the EU-DEMO Magnet System in the Concept Design Phase , 2022, IEEE Transactions on Applied Superconductivity.

[23]  F. Dittus,et al.  Heat transfer in automobile radiators of the tubular type , 1930 .