Using Magnetic Regulators for the Optimization of Universal Ballasts

Nowadays, there are few commercial types of ballasts that are able to control fluorescent lamps with different power ratings. One of the main issues is how to get optimum operation for each lamp in this condition. This paper tries to demonstrate how to accomplish this objective using a magnetic regulator, i.e., using a variable inductor. This variable inductor is controlled by a dc current delivered by a forward converter directly supplied from the ballast dc bus voltage. This control current allows changing the resonant tank and adapting it to the working parameters imposed by each lamp, ensuring near-resonance working conditions. Design criteria and practical verifications are included to confirm this new technique. Theoretical predictions are verified with the experimental results for three TLD Philips fluorescent lamps, from 18 to 58 W.

[1]  M.K. Kazimierczuk,et al.  Low-Voltage Electronic Ballast Based on Class E Oscillator , 2007, IEEE Transactions on Power Electronics.

[2]  M. Rico-Secades,et al.  A new control method for electronic ballasts based on magnetic regulators , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[3]  Hung-Yi Liu,et al.  AC-Side CCM CS–CP–PFC Electronic Ballast , 2007, IEEE Transactions on Power Electronics.

[4]  S. Ben-Yaakov,et al.  A current-controlled variable-inductor for high frequency resonant power circuits , 1994, Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94.

[5]  R. Zane,et al.  Design of Resonant Inverters for Optimal Efficiency Over Lamp Life in Electronic Ballast With Phase Control , 2005, IEEE Transactions on Power Electronics.

[6]  J.M. Alonso,et al.  Optimization of universal ballasts through magnetic regulators , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[7]  Sam Ben-Yaakov,et al.  Analysis of current-controlled inductors by new SPICE behavioral model , 2005 .

[8]  Selim Öncü,et al.  Dimming self-oscillating ballast by variable inductor , 2007 .

[9]  Tsai-Fu Wu,et al.  Sequential Color LED Backlight Driving System for LCD Panels , 2007, IEEE Transactions on Power Electronics.

[10]  S.Y.R. Hui,et al.  An automatic lamp detection technique for electronic ballasts , 2005, Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005..

[11]  S. Buso,et al.  Small-Signal Analysis of Cold Cathode Fluorescent Lamp Ballasts , 2005, IEEE Transactions on Power Electronics.

[12]  Marco A. Dalla Costa,et al.  Comparative Analysis and Experiments of Resonant Tanks for Magnetically Controlled Electronic Ballasts , 2008, IEEE Transactions on Industrial Electronics.

[13]  G.C.R. Sincero,et al.  High Pressure Sodium Lamp High Power Factor Electronic Ballasts Using AC–AC Converters , 2007, IEEE Transactions on Power Electronics.

[14]  A.J. Calleja,et al.  Series Igniters Effects in Metal Halide Lamps Operation With High Frequency Ballasts: Study and Minimization , 2007, IEEE Transactions on Power Electronics.

[15]  Jorge García,et al.  Magnetic dimming of electronic ballasts , 2005 .

[16]  U. Boeke.  Scalable fluorescent lamp driver using magnetic amplifiers , 2005, 2005 European Conference on Power Electronics and Applications.

[17]  S. Ben-Yaakov,et al.  Cold Cathode Fluorescent Lamps Driven by Piezoelectric Transformers: Stability Conditions and Thermal Effect , 2007, IEEE Transactions on Power Electronics.

[18]  F.T. Wakabayashi,et al.  Setting the Preheating and Steady-State Operation of Electronic Ballasts, Considering Electrodes of Hot-Cathode Fluorescent Lamps , 2007, IEEE Transactions on Power Electronics.

[19]  M. Ponce,et al.  Stabilization of HID Lamps Using DC–DC Converters With an Open Loop Control , 2007, IEEE Transactions on Power Electronics.

[20]  R. Zane,et al.  Electronic Ballast Control IC With Digital Phase Control and Lamp Current Regulation , 2008, IEEE Transactions on Power Electronics.