Hardware Implementation Overhead of Switchable Matching Networks

Nowadays, more and more RF systems include switchable matching networks to decrease the impact of the environment-dependent antenna impedance on the RF front end performance. This paper reviews the theoretical lower limit on the required number of matching states to match VSWR ranges and then presents an analysis of hardware implementations to actually implement a suitable switchable matching network. A number of matching network topologies are analyzed: PI networks, loaded transmission lines, branch line coupler based circuits, single circulators and cascaded circulators. In our investigation only narrow-band applications are targeted. For the various circuit implementations the required number of matching states for each hardware implementation is compared to the theoretical minimum number of states required for the same matching in order to benchmark their hardware implementation overhead. It appears that a matching network using cascaded circulators is the closest to the theoretical optimum for networks with a relatively low number of states: this type of matching network was implemented and analyzed in more detail.

[1]  Bertan Bakkaloglu,et al.  A Mixed-Signal Matching State Search Based Adaptive Antenna Tuning IC , 2010, IEEE Microwave and Wireless Components Letters.

[2]  Bram Nauta,et al.  An Automatic Antenna Tuning System Using Only RF Signal Amplitudes , 2008, IEEE Transactions on Circuits and Systems II: Express Briefs.

[3]  L. K. Anderson,et al.  An Analysis of Broadband Circulators with External Tuning Elements , 1967 .

[4]  P. Garcia,et al.  An RF electronically controlled impedance tuning network design and its application to an antenna input impedance automatic matching system , 2004, IEEE Transactions on Microwave Theory and Techniques.

[5]  C. Person,et al.  4G antenna tuner integrated in a 130 nm CMOS SOI technology , 2012, 2012 IEEE 12th Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems.

[6]  Antonino Scuderi,et al.  A VSWR-protected silicon bipolar RF power amplifier with soft-slope power control , 2005, IEEE Journal of Solid-State Circuits.

[7]  Anne-Johan Annema,et al.  On the Minimum Number of States for Switchable Matching Networks , 2015, IEEE Transactions on Circuits and Systems I: Regular Papers.

[8]  Kevin Boyle,et al.  A low cost dual-band adaptive antenna tuning module for mobile phones , 2010, 2010 International Workshop on Antenna Technology (iWAT).

[9]  Paloma Garcia Ducar,et al.  Design and Applications of a 300–800 MHz Tunable Matching Network , 2013, IEEE Journal on Emerging and Selected Topics in Circuits and Systems.

[10]  Anne-Johan Annema,et al.  Antenna Behaviour in the Presence of Human Body , 2004 .

[11]  A. Abbosh.  Compact Tunable Reflection Phase Shifters Using Short Section of Coupled Lines , 2012, IEEE Transactions on Microwave Theory and Techniques.

[12]  R. W. Vogel,et al.  Analysis and design of lumped- and lumped-distributed-element directional couplers for MIC and MMIC applications , 1992 .

[13]  R.R. Mansour,et al.  Design Methodology and Optimization of Distributed MEMS Matching Networks for Low-Microwave-Frequency Applications , 2009, IEEE Transactions on Microwave Theory and Techniques.

[14]  Peter Sjöblom,et al.  Constant Mismatch Loss Boundary Circles and Their Application to Optimum State Distribution in Adaptive Matching Networks , 2014, IEEE Trans. Circuits Syst. II Express Briefs.

[15]  Reza Mahmoudi,et al.  Adaptive Impedance-Matching Techniques for Controlling L Networks , 2010, IEEE Transactions on Circuits and Systems I: Regular Papers.

[16]  Yichuang Sun,et al.  Evolutionary tuning method for automatic impedance matching in communication systems , 1998, 1998 IEEE International Conference on Electronics, Circuits and Systems. Surfing the Waves of Science and Technology (Cat. No.98EX196).

[17]  R. Nunes de Lima,et al.  Impedance Network for an Automatic Impedance Matching System , 2007, 2007 Asia-Pacific Microwave Conference.

[18]  Eric Kerherve,et al.  A Novel Method for Synthesizing an Automatic Matching Network and Its Control Unit , 2011, IEEE Transactions on Circuits and Systems I: Regular Papers.

[19]  P. Ferrari,et al.  Complete Design and Measurement Methodology for a Tunable RF Impedance-Matching Network , 2008, IEEE Transactions on Microwave Theory and Techniques.

[20]  Arthur S. Morris,et al.  Direct calculation method for matching network dynamic control , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[21]  M. M. Doss.  A fast adaptive technique for impedance matching networks , 1996, Proceedings of 8th Mediterranean Electrotechnical Conference on Industrial Applications in Power Systems, Computer Science and Telecommunications (MELECON 96).

[22]  Arthur S. Morris,et al.  An Analytical Algorithm for Pi-Network Impedance Tuners , 2011, IEEE Transactions on Circuits and Systems I: Regular Papers.

[23]  J.L. Young,et al.  A compact recursive trans-impedance Green's function for the inhomogeneous ferrite microwave circulator , 2004, IEEE Transactions on Microwave Theory and Techniques.

[24]  Kwanyeob Chae,et al.  An antenna mismatch immuned CMOS power amplifier , 2010, 2010 IEEE Asian Solid-State Circuits Conference.

[25]  M. J. Thompson,et al.  Fast antenna tuning using transputer based simulated annealing , 2000 .

[26]  K. Brito,et al.  Tunable impedance matching network , 2007, 2007 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference.

[27]  R. Collin.  Foundations for microwave engineering , 1966 .

[28]  F. Ellinger,et al.  Compact reflective-type phase-shifter MMIC for C-band using a lumped-element coupler , 2001 .

[29]  Reza Mahmoudi,et al.  Adaptive methods to preserve power amplifier linearity under antenna mismatch conditions , 2005, IEEE Transactions on Circuits and Systems I: Regular Papers.

[30]  Jong-Won Yu,et al.  High-speed real-time hand effect tuning algorithm in hand-held terminal , 2011, 2011 IEEE MTT-S International Microwave Workshop Series on Intelligent Radio for Future Personal Terminals.

[31]  Reza Mahmoudi,et al.  A GSM/EDGE/WCDMA Adaptive Series-LC Matching Network Using RF-MEMS Switches , 2008, IEEE Journal of Solid-State Circuits.

[32]  Slim Boumaiza,et al.  Novel reconfigurable fundamental/harmonic matching network for enhancing the efficiency of power amplifiers , 2010, The 40th European Microwave Conference.

[33]  D. A. Frickey.  Conversions between S, Z, Y, H, ABCD, and T parameters which are valid for complex source and load impedances , 1994 .

[34]  I. Ikushima,et al.  A Temperature-Stabilized Broad-Band Lumped-Element Circulator , 1974 .

[35]  Y. Konishi.  Lumped Element Y Circulator , 1965 .

[36]  Fernando Rangel de Sousa,et al.  RF amplifier with automatic impedance matching system , 2011, 2011 IEEE Second Latin American Symposium on Circuits and Systems (LASCAS).

[37]  Tadashi Takagi,et al.  An ultra-broad-band reflection-type phase-shifter MMIC with series and parallel LC circuits , 2001, IMS 2001.

[38]  Kevin Boyle,et al.  Mobile phone antenna impedance variations with real users and phantoms , 2011, 2011 International Workshop on Antenna Technology (iWAT).

[39]  A. S. Morris,et al.  A New Method for Matching Network Adaptive Control , 2013, IEEE Transactions on Microwave Theory and Techniques.

[40]  A. Scuderi,et al.  A Methodology for Fast VSWR Protection Implemented in a Monolithic 3-W 55% PAE RF CMOS Power Amplifier , 2008, IEEE Journal of Solid-State Circuits.