Waste glass as partial mineral precursor in alkali-activated slag/fly ash system

[1]  J. A. Gadsden.  Infrared Spectra of Minerals and Related Inorganic Compounds , 1975 .

[2]  T. Sweeting,et al.  On the correlation of minimum porosity with particle size distribution , 1985 .

[3]  C. Warren,et al.  Submicroscopic model of fly ash particles , 1987 .

[4]  W. Taylor.  Application of infrared spectroscopy to studies of silicate glass structure: Examples from the melilite glasses and the systems Na2O-SiO2 and Na2O-Al2O3-SiO2 , 1990 .

[5]  Tuchman.  Research toward direct analysis of quartz dust on filters using FTIR spectroscopy. Information Circular/1992 , 1992 .

[6]  C. Dobson,et al.  The characterization of hardened alkali-activated blast-furnace slag pastes and the nature of the calcium silicate hydrate (C-S-H) phase , 1994 .

[7]  K. Scrivener,et al.  Hydration products of alkali activated slag cement , 1995 .

[8]  Ángel Palomo,et al.  Alkali-activated fly ashes: A cement for the future , 1999 .

[9]  P. Pernice,et al.  Solid state 27Al NMR and FTIR study of lanthanum aluminosilicate glasses , 1999 .

[10]  Hamlin M. Jennings,et al.  Pore solution chemistry of alkali-activated ground granulated blast-furnace slag , 1999 .

[11]  J. Sykes,et al.  Sodium silicate-based alkali-activated slag mortars: Part II. The retarding effect of additions of sodium chloride or malic acid , 2000 .

[12]  S. Martínez-Ramírez,et al.  Alkali-activated fly ash/slag cements: Strength behaviour and hydration products , 2000 .

[13]  S. Alonso,et al.  Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio , 2001 .

[14]  S. Gíslason,et al.  The mechanism, rates and consequences of basaltic glass dissolution: I. An experimental study of the dissolution rates of basaltic glass as a function of aqueous Al, Si and oxalic acid concentration at 25°C and pH = 3 and 11 , 2001 .

[15]  J. Deventer,et al.  Structural reorganisation of class F fly ash in alkaline silicate solutions , 2002 .

[16]  F. B. Reig,et al.  FTIR quantitative analysis of calcium carbonate (calcite) and silica (quartz) mixtures using the constant ratio method. Application to geological samples. , 2002, Talanta.

[17]  J. V. Deventer,et al.  Use of Infrared Spectroscopy to Study Geopolymerization of Heterogeneous Amorphous Aluminosilicates , 2003 .

[18]  Francisca Puertas,et al.  Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements , 2003 .

[19]  F. Puertas,et al.  Mineralogical and microstructural characterisation of alkali-activated fly ash/slag pastes , 2003 .

[20]  J. I. Escalante-García,et al.  Hydration Products and Reactivity of Blast‐Furnace Slag Activated by Various Alkalis , 2003 .

[21]  Alain Ehrlacher,et al.  The use of thermal analysis in assessing the effect of temperature on a cement paste , 2005 .

[22]  D. Vlachos,et al.  Physical basis for the formation and stability of silica nanoparticles in basic solutions of monovalent cations. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[23]  J. Deventer,et al.  Modeling Speciation in Highly Concentrated Alkaline Silicate Solutions , 2005 .

[24]  A. Buchwald,et al.  Alkali-activated binders by use of industrial by-products , 2005 .

[25]  Á. Palomo,et al.  Microstructure Development of Alkali-Activated Fly Ash Cement: A Descriptive Model , 2005 .

[26]  Ángel Palomo,et al.  Mid-infrared spectroscopic studies of alkali-activated fly ash structure , 2005 .

[27]  Á. G. Torre,et al.  Quantitative determination of phases in the alkali activation of fly ash. Part I. Potential ash reactivity , 2006 .

[28]  Á. G. Torre,et al.  Quantitative determination of phases in the alkaline activation of fly ash. Part II: Degree of reaction , 2006 .

[29]  B. Kutchko,et al.  Fly ash characterization by SEM–EDS , 2006 .

[30]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[31]  Matthew J. DeJong,et al.  The nanogranular behavior of C-S-H at elevated temperatures (up to 700 °C) , 2007 .

[32]  C. Shi,et al.  A review on the use of waste glasses in the production of cement and concrete , 2007 .

[33]  J. Provis,et al.  Attenuated total reflectance fourier transform infrared analysis of fly ash geopolymer gel aging. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[34]  J. Provis,et al.  In situ ATR-FTIR study of the early stages of fly ash geopolymer gel formation. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[35]  Ángel Palomo,et al.  Alkali activation of fly ash: Effect of the SiO2/Na2O ratio Part I: FTIR study , 2007 .

[36]  J.S.J. van Deventer,et al.  Geopolymerisation kinetics. 2. Reaction kinetic modelling , 2007 .

[37]  J. Deventer,et al.  The Role of Inorganic Polymer Technology in the Development of ‘Green Concrete’ , 2007 .

[38]  John L. Provis,et al.  Effect of Calcium Silicate Sources on Geopolymerisation , 2008 .

[39]  Á. Palomo,et al.  Effect of the SiO2/Na2O ratio on the alkali activation of fly ash. Part II: 29Si MAS-NMR Survey , 2008 .

[40]  J. Provis,et al.  Designing Precursors for Geopolymer Cements , 2008 .

[41]  S. E. Chidiac,et al.  Waste glass as a supplementary cementitious material in concrete – Critical review of treatment methods , 2009 .

[42]  D. Macphee,et al.  Stability of Synthetic Calcium Silicate Hydrate Gels in Presence of Alkalis, Aluminum, and Soluble Silica , 2010 .

[43]  S. P. Mehrotra,et al.  Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer , 2010, Journal of Materials Science.

[44]  H. Manzano,et al.  A model for the C-A-S-H gel formed in alkali-activated slag cements , 2011 .

[45]  J. Deventer,et al.  The effect of silica availability on the mechanism of geopolymerisation , 2011 .

[46]  Hao Wang,et al.  Quantitative study of the reactivity of fly ash in geopolymerization by FTIR , 2012 .

[47]  Jordi Payá,et al.  Alkali activation of vitreous calcium aluminosilicate derived from glass fiber waste , 2012 .

[48]  Deepak Ravikumar,et al.  Effects of activator characteristics on the reaction product formation in slag binders activated using alkali silicate powder and NaOH , 2012 .

[49]  N. Neithalath,et al.  Reaction kinetics in sodium silicate powder and liquid activated slag binders evaluated using isothermal calorimetry , 2012 .

[50]  N. Neithalath,et al.  Isothermal reaction kinetics and temperature dependence of alkali activation of slag, fly ash and their blends , 2013 .

[51]  J. Deventer,et al.  Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash , 2014 .

[52]  Francisca Puertas,et al.  Use of glass waste as an activator in the preparation of alkali-activated slag. Mechanical strength and paste characterisation , 2014 .

[53]  Arezki Tagnit-Hamou,et al.  WASTE GLASS POWDER-BASED ALKALI-ACTIVATED MORTAR , 2014 .

[54]  N. Neithalath,et al.  Microstructure, strength, and moisture stability of alkali activated glass powder-based binders , 2014 .

[55]  William Hogland,et al.  Waste glass in the production of cement and concrete – A review , 2014 .

[56]  Francisca Puertas,et al.  Sodium silicate solutions from dissolution of glasswastes. Statistical analysis , 2014 .

[57]  B. S. Gebregziabiher,et al.  Influence of starting material on the early age hydration kinetics, microstructure and composition of binding gel in alkali activated binder systems , 2014 .

[58]  John L. Provis,et al.  Alkali activated materials : state-of-the-art report, RILEM TC 224-AAM , 2014 .

[59]  P. Mondal,et al.  Co-existence of aluminosilicate and calcium silicate gel characterized through selective dissolution and FTIR spectral subtraction , 2015 .

[60]  Katrina C. Newlands.  The early stage dissolution characteristics of aluminosilicate glasses , 2015 .

[61]  H. Brouwers,et al.  Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag–fly ash blends , 2015 .

[62]  H. Lee,et al.  Reactivity and reaction products of alkali-activated, fly ash/slag paste , 2015 .

[63]  M. Verkuijlen,et al.  FT-IR and 29Si-NMR for evaluating aluminium–silicate precursors for geopolymers , 2015 .

[64]  Guang Ye,et al.  A Review on the Durability of Alkali-Activated Fly Ash/Slag Systems: Advances, Issues, and Perspectives , 2016 .