Effect of roughness of substrate and sputtering power on the properties of TiN coatings deposited by magnetron sputtering for ATF

[1]  H. Seifert,et al.  Protective coatings on zirconium-based alloys as accident-tolerant fuel (ATF) claddings , 2017 .

[2]  Masayuki Uchihashi.  Progress on ATF Development of SiC for LWR , 2017 .

[3]  Jung-Hwan Park,et al.  Behavior of an improved Zr fuel cladding with oxidation resistant coating under loss-of-coolant accident conditions , 2016 .

[4]  Haibin Zhang,et al.  Deposition and characterization of Ti2AlC MAX phase and Ti3AlC thin films by magnetron sputtering , 2016 .

[5]  A. Motta,et al.  Multilayer (TiN, TiAlN) ceramic coatings for nuclear fuel cladding , 2016 .

[6]  Yujin Hu,et al.  Effect of machining-induced surface residual stress on initiation of stress corrosion cracking in 316 austenitic stainless steel , 2016 .

[7]  K. Daub,et al.  Investigation of the impact of coatings on corrosion and hydrogen uptake of Zircaloy-4 , 2015 .

[8]  A. Motta,et al.  MULTILAYER CERAMIC COATING FOR CORROSION (C3) RESISTANCE OF NUCLEAR FUEL CLADDING , 2015 .

[9]  K. Sridharan,et al.  Cold spray deposition of Ti2AlC coatings for improved nuclear fuel cladding , 2015 .

[10]  Jung-Hwan Park,et al.  High temperature steam-oxidation behavior of arc ion plated Cr coatings for accident tolerant fuel claddings , 2015 .

[11]  V. Ovcharenko,et al.  Vacuum-arc chromium-based coatings for protection of zirconium alloys from the high-temperature oxidation in air , 2015 .

[12]  Yang-Hyun Koo,et al.  Adhesion property and high-temperature oxidation behavior of Cr-coated Zircaloy-4 cladding tube prepared by 3D laser coating , 2015 .

[13]  Hongbin Zhang,et al.  Superior corrosion resistance properties of TiN-based coatings on Zircaloy tubes in supercritical water , 2014 .

[14]  K. Terrani,et al.  Silicon carbide composite for light water reactor fuel assembly applications , 2014 .

[15]  S. Zinkle,et al.  Advanced Oxidation Resistant Iron-Based Alloys for LWR Fuel Cladding , 2014 .

[16]  W. J. Carmack,et al.  The U.S. DOE Accident Tolerant Fuel Development Program , 2013 .

[17]  Kurt A. Terrani,et al.  High temperature oxidation of fuel cladding candidate materials in steam–hydrogen environments , 2013 .

[18]  Hejun Li,et al.  Annealing effect on microstructure and mechanical properties of magnetron sputtering Ti–Si–C thin film , 2013 .

[19]  M. Kazimi,et al.  Characteristics of Composite Silicon Carbide Fuel Cladding after Irradiation under Simulated PWR Conditions , 2013 .

[20]  Frédéric Schuster,et al.  ASSESSMENT AT CEA OF COATED NUCLEAR FUEL CLADDING FOR LWRS WITH INCREASED MARGINS IN LOCA AND BEYOND LOCA CONDITIONS , 2013 .

[21]  W. Sproul,et al.  Tribological behavior of thick CrN coatings deposited by modulated pulsed power magnetron sputtering , 2012 .

[22]  W. Sproul,et al.  High rate deposition of thick CrN and Cr2N coatings using modulated pulse power (MPP) magnetron sputtering , 2011 .

[23]  P. Withers,et al.  Residual stress. Part 1 – Measurement techniques , 2001 .

[24]  J. Cohen,et al.  Residual Stress: Measurement by Diffraction and Interpretation , 1987 .