Study of reliability of fibre Bragg grating fibre optic strain sensors for field-test applications

Abstract In this paper, the reliability and thus the suitability of optical fibre strain sensors for surface strain measurement in concrete structures was investigated. Two different configurations of optical strain sensors were used each having different mountings making them suitable for different uses in various structures. Due to the very limited time available to install the sensors and take result, commercially packaged sensors were used. In the tests carried out each sensor was mounted onto a concrete beam which was then subjected to a range of known and calibrated loadings. The performance of the optical strain sensors thus evaluated was compared with the results of conventional techniques. This comparison allows for selecting the best performing combination of sensor/mounting, i.e. long-gauge sensor with mounts bolted to threaded rods glued into the concrete for use in future work in a field test where a limited time window was available for installation, testing and post-test demounting.

[1]  Richard H. Scott,et al.  Long-Term Tension-Stiffening Effects in Concrete , 2005 .

[2]  J. Zhou,et al.  Study on Strain Transfer Characteristics of Fiber Bragg Grating Sensors , 2010 .

[3]  W Lee,et al.  Railroad bridge instrumentation with fiber-optic sensors. , 1999, Applied optics.

[4]  A. W. Beeby,et al.  Cracking and tension zone behaviour in RC flexural members , 2007 .

[5]  L.A. Wang,et al.  Packaging methods of fiber-Bragg grating sensors in civil structure applications , 2005, IEEE Sensors Journal.

[6]  F. Ansari,et al.  MECHANICS OF BOND AND INTERFACE SHEAR TRANSFER IN OPTICAL FIBER SENSORS , 1998 .

[7]  Claire Davis,et al.  Packaging and Mounting of In-Fibre Bragg Grating Arrays for Structural Health Monitoring of Large Structures , 2010 .

[8]  Tong Sun,et al.  Development and Longer Term In Situ Evaluation of Fiber-Optic Sensors for Monitoring of Structural Concrete , 2009, IEEE Sensors Journal.

[9]  Libo Yuan,et al.  Strain monitoring in FRP laminates and concrete beams using FBG sensors , 2001 .

[10]  Pradipta Banerji,et al.  Structural Health Monitoring of a Steel Railway Bridge for Increased Axle Loads , 2011 .

[11]  Gangbing Song,et al.  Recent applications of fiber optic sensors to health monitoring in civil engineering , 2004 .

[12]  Adrian Long,et al.  State-of-the-art Applications of the Pull-off Test in Civil Engineering , 2008 .

[13]  B. T. Meggitt,et al.  Devices and technology , 1998 .

[14]  Kenneth T. V. Grattan,et al.  Structural health monitoring of a composite bridge using Bragg grating sensors. Part 1: Evaluation of adhesives and protection systems for the optical sensors , 2007 .

[15]  Tommy H.T. Chan,et al.  Fiber Bragg grating sensors for structural health monitoring of Tsing Ma bridge : Background and experimental observation , 2006 .

[16]  S. Parivallal,et al.  Investigation on packages of fiber Bragg grating for use as embeddable strain sensor in concrete structure , 2010 .

[17]  T. K. Gangopadhyay,et al.  Fibre Bragg gratings in structural health monitoring—Present status and applications , 2008 .

[18]  Gangbing Song,et al.  Strain transferring analysis of fiber Bragg grating sensors , 2006 .

[19]  R. H. Scott,et al.  Moment redistribution effects in beams , 2005 .