Solid‐State Electrochemical Sensors

[1]  S. Vilminot,et al.  Characteristics of an oxygen gauge at temperatures lower than 200°C , 1983 .

[2]  R. Hewins,et al.  Intrinsic oxygen fugacities of diogenites and mesosiderite clasts , 1984 .

[3]  D. E. Mathis,et al.  Impedance measurements on purified silver chloride crystals using ionic vs. electronic contacts , 1977 .

[4]  William J. Kaiser,et al.  A high-sensitivity sensor for the measurement of combustible gas mixtures☆ , 1986 .

[5]  Glass electrodes with solid-state membrane contacts and their application in differential potentiometric sensors , 1985 .

[6]  K. Jacob,et al.  An SOx (x = 2, 3) sensor using β-alumina/Na2SO4 couple , 1989 .

[7]  M. S. Frant,et al.  Electrode for Sensing Fluoride Ion Activity in Solution , 1966, Science.

[8]  S. Badwal.  New electrode materials for low temperature oxygen sensors , 1983 .

[9]  J. Lundsgaard,et al.  A novel hydrogen gas sensor based on hydrogen uranyl phosphate , 1982 .

[10]  T. Fjeldly,et al.  Solid state differential potentiometric sensors , 1982 .

[11]  H. Kaneko,et al.  Amperometric determination of reducing gas amounts in argon by an oxygen pump-gauge , 1989 .

[12]  J. Maier.  Gas sensitivity of AgCl interfaces , 1990 .

[13]  E. Siebert,et al.  Electrode Reactions in Potentiometric Gas Sensor , 1989 .

[14]  D. Fray,et al.  Determination of the sodium activity in aluminum and aluminum silicon alloys using sodium beta alumina , 1983 .

[15]  A. Clearfield,et al.  A time of flight neutron powder rietveld refinement study at elevated temperature on a monoclinic near-stoichiometric NASICON , 1988 .

[16]  S. Badwal,et al.  Oxygen measurement with SIRO2 sensors , 1987 .

[17]  F. Haber.  Über die Knallgaskette. III. Mitteilung , 1906 .

[18]  K. J. de Vries,et al.  Electrochemical properties of stabilized δ-Bi2O3. Oxygen pump properties of Bi2O3-Er2O3 solid solutions , 1989 .

[19]  Hermann Dietz,et al.  Gas-diffusion-controlled solid-electrolyte oxygen sensors , 1982 .

[20]  G. Eisenman.  Similarities and differences between liquid and solid ion exchangers and their usefulness as ion specific electrodes , 1968 .

[21]  J. Fouletier,et al.  Doped ceria electrolyte in oxygen sensors , 1983 .

[22]  Motoaki Sato.  Electrochemical Measurements and Control of Oxygen Fugacity and Other Gaseous Fugacities with Solid Electrolyte Sensors , 1971 .

[23]  P. Fabry,et al.  New compounds for ISFETS , 1987 .

[24]  J. Fouletier,et al.  Gas analysis with potentiometric sensors. a review , 1982 .

[25]  L. Niedrach.  A New Membrane‐Type pH Sensor for Use in High Temperature‐High Pressure Water , 1980 .

[26]  K. Nagata,et al.  New applications of oxygen sensors to ironmaking and steelmaking in Japan , 1983 .

[27]  N. Yamazoe,et al.  A POTENTIOMETRIC OXYGEN SENSOR USING LaF3 SINGLE CRYSTAL OPERATIVE AT ROOM TEMPERATURE , 1984 .

[28]  H. Hong,et al.  Crystal structures and crystal chemistry in the system Na1+xZr2SixP3−xO12☆ , 1976 .

[29]  Piet Bergveld,et al.  Properties of Ag/AgCl electrodes fabricated with IC-compatible technologies , 1986 .

[30]  J. Fouletier,et al.  Model for the Electrical Conductivity of Reduced Stabilized Zirconia , 1988 .

[31]  P. Fabry,et al.  Nasicon, an ionic conductor for solid-state Na+-selective electrode , 1988 .

[32]  W. Kenan,et al.  Field effect potentiometric sensors , 1977 .

[33]  D. Franceschetti,et al.  Electrochemical Determination of Local Hydrogen Concentration in a Metal , 1982 .

[34]  N. Yamazoe,et al.  Development of a Solid-State Gas Sensor Using Proton Conductor Operative at Room Temperature , 1988 .

[35]  D. Pribat,et al.  Microionic gas sensor for pollution and energy control in the consumer market , 1988 .

[36]  The Speed of Response of Solid Electrolyte Galvanic Cells for Gas Sensing , 1977 .

[37]  Toshio Maruyama,et al.  Electromotive force of the COCO2O2 concentration cell using Na2CO3 as a solid electrolyte at low oxygen partial pressures , 1987 .

[38]  P. Fabry,et al.  Ion exchange between two solid-oxide electrolytes , 1978 .

[39]  D. Janke.  Oxygen probes based on calcia-doped hafnia or calcium zirconate for use in metallic melts , 1982 .

[40]  Takehiko Takahashi,et al.  Oxide ion conductors based on bismuthsesquioxide , 1978 .

[41]  B. P. Nikolskii,et al.  Solid Contact in Membrane Ion-Selective Electrodes , 1985 .

[42]  G. Periaswami,et al.  Low-temperature zirconia oxygen gauges based on RuO2 electrode , 1988 .

[43]  P. Fabry,et al.  Electrochemical Semipermeability and the Electrode Microsystem in Solid Oxide Electrolyte Cells , 1976 .

[44]  C. P. Smith,et al.  Electrochemical techniques for monitoring dissolved carbon, hydrogen and oxygen in liquid sodium , 1982 .

[45]  A. Muan,et al.  A New Cell for Electrochemical Studies at Elevated Temperatures: Design and Properties of a Cell Involving a Combination of Thorium Oxide‐Yttrium Oxide and Zirconium Oxide‐Calcium Oxide Electrolytes , 1969 .

[46]  H. Okamoto,et al.  Low-temperature performance of fluoride-ion-treated ZrO2 oxygen sensor , 1981 .

[47]  M. Verkerk,et al.  High Oxygen Ion Conduction in Sintered Oxides of the $Bi_2O_3-Dy_2O_3$ System , 1981 .

[48]  M. Iwase,et al.  Oxygen Permeability of Calcia-Stabilized Zirconia at Low Oxygen Partial Pressures , 1978 .

[49]  V. Young.  Theoretical and experimental conductivities of silver halide-silver sulfide ISE membranes , 1987 .

[50]  B. Liaw,et al.  Low temperature limiting-current oxygen sensors using tetragonal zirconia as solid electrolytes , 1990 .

[51]  J. Fouletier,et al.  Performance characteristics of conventional oxygen gauges , 1982 .

[52]  R. Ducroux,et al.  Mesure du potentiel d'oxygène dans le système U0.7C0.3O2±x à l'aide d'une minisonde à électrolyte solide , 1981 .

[53]  M. Gauthier,et al.  Use of the Junction Between Two Solid Electrolytes for the Potentiometric Measurement of Gaseous Oxides , 1984 .

[54]  R. Arculus,et al.  Intrinsic oxygen fugacity measurements: techniques and results for spinels from upper mantle peridotites and megacryst assemblages , 1981 .

[55]  K. Saji.  Characteristics of Limiting Current‐Type Oxygen Sensor , 1987 .

[56]  A. Lewenstam,et al.  Response mechanism of solid-state ion-selective electrodes in the presence of interfering ions , 1987 .

[57]  E. Siebert,et al.  Oxygen Sensing with Solid Electrolyte Cells from Room Temperature up to 250°C , 1987 .

[58]  J. Fouletier,et al.  Measurement and regulation of oxygen content in selected gases using solid electrolyte cells. IV. Accurate preparation of CO2-CO and H2O-H2 mixtures , 1981 .

[59]  M. Gauthier,et al.  Solid‐State Detectors for the Potentiometric Determination of Gaseous Oxides II . Measurements in Oxygen‐Variable Gases in the , , , System , 1977 .

[60]  S. Somov.  Application of gas-diffusive solid electrolyte cell for analysis of gas with high oxygen content , 1989 .

[61]  M. Gauthier,et al.  29 – Solid-State Potentiometric Gauges for Gaseous Species , 1978 .

[62]  Hiroshi Osanai,et al.  Gas Polarographic Oxygen Sensor Using an Oxygen/Zirconia Electrolyte , 1989 .

[63]  Dieter Janke,et al.  A new immersion sensor for the rapid electrochemical determination of dissolved oxygen in metallic melts , 1981 .

[64]  N. Yamazoe,et al.  Potentiometric solid-state oxygen sensor using lanthanum fluoride operative at room temperature☆ , 1987 .

[65]  典彦 武津,et al.  SrCe0.95Yb0.05O3-δ固体電解質を用いた水素濃淡電池の起電力 , 1987 .

[66]  I. Kolthoff,et al.  Electric Potentials at Crystal Surfaces, and at Silver Halide Surfaces in Particular , 1937 .

[67]  Toshio Maruyama,et al.  Potentiometric sensor for sulfur oxides using nasicon as a solid electrolyte , 1985 .

[68]  J. Härkki,et al.  Oxygen and carbon sensing in Fe-O-C and Fe-O-C-Xnmelts at elevated carbon contents , 1986 .

[69]  D. Janke.  Recent development of solid ionic sensors to control iron and steel bath composition , 1990 .

[70]  M. Iwase,et al.  Oxygen permeability of calcia-stabilized zirconia , 1978 .

[71]  N. Yamazoe,et al.  Solid electrolyte oxygen sensor using LaF3 sputtered film workable at room temperature. , 1987 .

[72]  S. Badwal,et al.  Nernstian behaviour of zirconia oxygen sensors incorporating composite electrodes , 1988 .

[73]  S. Ramasesha,et al.  Design of temperature-compensated reference electrodes for non-isothermal galvanic sensors , 1989 .

[74]  T. Fjeldly,et al.  Fluoride Electrodes with Reversible Solid‐State Contacts , 1980 .

[75]  N. Yamazoe,et al.  Solid-state oxygen sensor using sputtered LaF3 film , 1989 .

[76]  D. Fray,et al.  Sodium activity determinations in molten 99.5% aluminium using solid electrolytes , 1985 .

[77]  D. J. Fray,et al.  Development of solid-state hydrogen sensors☆ , 1988 .

[78]  M. Kleitz.  Electrode and interface reactions in solid-state cells , 1981 .

[79]  W. Worrell.  High-temperature applications of solid-state ionics , 1988 .

[80]  K. Nagata,et al.  Humidity sensor with SrCe/sub 0. 95/Yb/sub 0. 05/O/sub 3/ solid electrolyte for high temperature use , 1987 .

[81]  S. Badwal,et al.  Performance of zirconia membrane oxygen sensors at low temperatures with nonstoichiometric oxide electrodes , 1986 .

[82]  G. Velasco,et al.  Study of calcia‐stabilized zirconia thin‐film sensors , 1977 .

[83]  P. Fabry,et al.  Utilization of a dilute solid electrolyte in an oxygen gauge , 1980 .

[84]  Takeyuki Suzuki,et al.  Low-temperature performance of thin solid electrolyte cell based on MoO3-doped Bi2O3 , 1984 .

[85]  D. Janke.  Basic considerations on the design of oxygen probes for continuous measurements in steel melts , 1983 .

[86]  C. Déportes,et al.  Sur l'utilisation d'une electrode ponctuelle dans les cellules à oxyde electrolyte solide: I. Application aux mesures thermodynamiques et à la détermination du nombre de transport electronique de l'electrolyte , 1972 .

[87]  F. A. Kröger,et al.  Stabilized Zirconia as an Oxygen Pump , 1969 .

[88]  Mituo Harata,et al.  Characteristics of the Na/beta-alumina/Na cell as a sodium vapor pressure sensor , 1982 .

[89]  Ricardo M. Souto,et al.  Preparation and reproducibility of a thermal silver-silver chloride electrode , 1985 .

[90]  H. Iwahara,et al.  High Oxide Ion Conduction in Sintered Oxide of the System Bi2 O 3 ‐ M 2 O 5 , 1977 .

[91]  Maxwell Len McGlashan,et al.  Manual of symbols and terminology for physicochemical quantities and units , 1970 .

[92]  M. Gauthier,et al.  Solid‐State Detectors for the Potentiometric Determination of Gaseous Oxides I . Measurement in Air , 1977 .

[93]  W. C. Vassell,et al.  Oxygen sensing by electrochemical pumping , 1981 .

[94]  W. L. Worrell,et al.  Sulfur dioxide sensors using solid-sulfate electrolytes , 1981 .

[95]  J. Fouletier,et al.  Measurement and regulation of oxygen content in gases using solid electrolyte cells. III. Oxygen pump-gauge , 1975 .

[96]  K. Nuri,et al.  Output Characteristics of a Gas-Polarographic Oxygen Sensor Using a Zirconia Electrolyte in the Knudsen Diffusion Region , 1987 .

[97]  K. Une,et al.  Thermodynamic properties of nonstoichiometric urania-gadolinia solid solutions in the temperature range 700–1100° C , 1982 .

[98]  W. Worrell.  Solid-Electrolyte Sensors for SO2 and/or SO3 , 1988 .

[99]  R. Ducroux,et al.  Mesures en continu de la redistribution de l'oxygène sous gradient thermique dans UO2+x , 1980 .

[100]  J. Schnell,et al.  Thin solid state electrochemical gas sensors , 1981 .

[101]  M. Gauthier,et al.  Progress in the Development of Solid‐State Sulfate Detectors for Sulfur Oxides , 1981 .

[102]  David M. Haaland,et al.  Internal-reference solid-electrolyte oxygen sensor , 1977 .

[103]  J. V. Spiegel,et al.  The extended gate chemically sensitive field effect transistor as multi-species microprobe☆ , 1983 .

[104]  N. Yamazoe,et al.  A Four‐Probe Type Gas Sensor Using a Solid‐State Proton Conductor Sensitive to Hydrogen at Room Temperature , 1987 .

[105]  R. Rapp,et al.  Mixed Conduction in Zr0.85 Ca0.15 O 1.85 and Th0.85 Y 0.15 O 1.925 Solid Electrolytes , 1967 .

[106]  C. Amata,et al.  PERMEABILITY OF ZIRCONIA, HAFNIA, AND THORIA TO OXYGEN , 1966 .

[107]  C. Mari,et al.  Solid-state galvanic cell for monitoring chlorine partial pressure , 1989 .

[108]  M. Armand,et al.  Polymer electrolyte as internal ionic bridge for ion solid-state sensors , 1988 .

[109]  W. C. Elliott,et al.  An intrinsic oxygen fugacity study of platinum-carbon associations in layered intrusions , 1982 .

[110]  J. Fouletier,et al.  Measurement and regulation of oxygen content in selected gases using solid electrolyte cells. II. Differential gauge , 1975 .

[111]  Yoshishige Ohyama,et al.  A study on the oxygen-biased wide range air-fuel ratio sensor for rich and lean air-fuel ratios , 1986 .

[112]  Christopher W. Bale,et al.  K 2 CO 3 Solid Electrolyte as a CO 2 Probe: Decomposition Measurements of CaCO3 , 1984 .

[113]  H. Iwahara,et al.  Performance of SrCeO 3 -Type Hydrogen and Steam Sensors Using AlPO 4 ・xH 2 O as a Solid Standard , 1990 .

[114]  S. F. Palguev,et al.  Oxygen Permeability of Stabilized Zirconia Solid Electrolytes , 1975 .

[115]  Toshio Maruyama,et al.  Potentiometric gas sensor for carbon dioxide using solid electrolytes , 1987 .

[116]  Werner Weppner,et al.  Application of fast ionic conductors in solid state galvanic cells for gas sensors , 1986 .

[117]  D. Macdonald,et al.  pH Measurements of High Temperature Aqueous Environments with Stabilized‐Zirconia Membranes , 1985 .

[118]  W. C. Maskell,et al.  Solid state potentiometric oxygen gas sensors , 1986 .

[119]  A. Burggraaf,et al.  Response behaviour of oxygen sensing solid electrolytes , 1985 .

[120]  R.E. Hetrick,et al.  Oscillatory-mode oxygen sensor , 1982, IEEE Transactions on Electron Devices.

[121]  J. Burda,et al.  Development of electrochemical oxygen meter for liquid sodium , 1984 .

[122]  A. Hammou,et al.  “Grain boundary effect” on ceria based solid solutions , 1983 .