Using CPE Function to Size Capacitor Storage for Electric Vehicles and Quantifying Battery Degradation during Different Driving Cycles

Range anxiety and battery cycle life are two major factors which restrict the development of electric vehicles. Battery degradation can be reduced by adding supercapacitors to create a Hybrid Energy Storage System. This paper proposes a systematic approach to configure the hybrid energy storage system and quantifies the battery degradation for electric vehicles when using supercapacitors. A continuous power-energy function is proposed to establish supercapacitor size based on national household travel survey statistics. By analyzing continuous driving action in standard driving cycles and special driving phases (start up and acceleration), the supercapacitor size is calculated to provide a compromise between the capacitor size and battery degradation. Estimating the battery degradation after 10 years, the battery capacity loss value decreases 17.55% and 21.6%, respectively, under the urban dynamometer driving schedule and the US06. Furthermore, the battery lifespan of the continuous power-energy configured system is prolonged 28.62% and 31.39%, respectively, compared with the battery alone system.

[1]  Jeremy Neubauer,et al.  Thru-life impacts of driver aggression, climate, cabin thermal management, and battery thermal management on battery electric vehicle utility , 2014 .

[2]  Hewu Wang,et al.  Energy consumption of electric vehicles based on real-world driving patterns: A case study of Beijing , 2015 .

[3]  Jianqiu Li,et al.  Multi-objective optimization of a semi-active battery/supercapacitor energy storage system for electric vehicles , 2014 .

[4]  Simona Onori,et al.  A new life estimation method for lithium-ion batteries in plug-in hybrid electric vehicles applications , 2012 .

[5]  Samveg Saxena,et al.  Quantifying EV battery end-of-life through analysis of travel needs with vehicle powertrain models , 2015 .

[6]  Thomas H. Bradley,et al.  Investigation of battery end-of-life conditions for plug-in hybrid electric vehicles , 2011 .

[7]  Angelika Heinzel,et al.  Power Management Optimization of an Experimental Fuel Cell/Battery/Supercapacitor Hybrid System , 2015 .

[8]  Alireza Khaligh,et al.  Optimization of Sizing and Battery Cycle Life in Battery/Ultracapacitor Hybrid Energy Storage Systems for Electric Vehicle Applications , 2014, IEEE Transactions on Industrial Informatics.

[9]  Iftekhar Ahmad,et al.  Quantifying economic benefits of second life batteries of gridable vehicles in the smart grid , 2014 .

[10]  Cong Zhang,et al.  A New Method to Optimize Semiactive Hybrid Energy Storage System for Hybrid Electrical Vehicle by Using PE Function , 2015 .

[11]  Song-Yul Choe,et al.  Modeling of degradation effects considering side reactions for a pouch type Li-ion polymer battery with carbon anode , 2014 .

[12]  Jeremy Neubauer,et al.  Sensitivity of Plug-In Hybrid Electric Vehicle Economics to Drive Patterns, Electric Range, Energy Management, and Charge Strategies , 2013 .

[13]  M. Verbrugge,et al.  Degradation of lithium ion batteries employing graphite negatives and nickel-cobalt-manganese oxide + spinel manganese oxide positives: Part 1, aging mechanisms and life estimation , 2014 .

[14]  Hans Kahlen,et al.  Supercapacitors for the energy management of electric vehicles , 1999 .

[15]  Dirk Uwe Sauer,et al.  Influence of plug-in hybrid electric vehicle charging strategies on charging and battery degradation costs , 2012 .

[16]  He Yin,et al.  Quantitative Evaluation of LiFePO$_4$ Battery Cycle Life Improvement Using Ultracapacitors , 2016, IEEE Transactions on Power Electronics.

[17]  Maxime Montaru,et al.  Statistical analysis for understanding and predicting battery degradations in real-life electric vehicle use , 2014 .

[18]  Andrew Cruden,et al.  Optimizing for Efficiency or Battery Life in a Battery/Supercapacitor Electric Vehicle , 2012, IEEE Transactions on Vehicular Technology.

[19]  Joeri Van Mierlo,et al.  Energy Consumption Prediction for Electric Vehicles Based on Real-World Data , 2015 .

[20]  Hamid Gualous,et al.  Frequency, thermal and voltage supercapacitor characterization and modeling , 2007 .

[21]  Fu Wen Zhao,et al.  Research on the Development Strategies of New Energy Automotive Industry Based on Car Charging Stations , 2015 .

[22]  Samveg Saxena,et al.  Quantifying electric vehicle battery degradation from driving vs. vehicle-to-grid services , 2016 .

[23]  Iqbal Husain,et al.  Effect of brake power distribution on dynamic programming technique in plug-in series hybrid electric vehicle control strategy , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[24]  L. Archer,et al.  Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries. , 2011, Angewandte Chemie.

[25]  Hesham Rakha,et al.  Power-based electric vehicle energy consumption model: Model development and validation , 2016 .

[26]  Andrew F. Burke,et al.  Batteries and Ultracapacitors for Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[27]  Domenico Laforgia,et al.  A method to estimate the environmental impact of an electric city car during six months of testing in an Italian city , 2014 .

[28]  Philippe Delarue,et al.  A Bidirectional Three-Level DC–DC Converter for the Ultracapacitor Applications , 2010, IEEE Transactions on Industrial Electronics.

[29]  Rajeev Ahuja,et al.  Synthesis, and crystal and electronic structure of sodium metal phosphate for use as a hybrid capacitor in non-aqueous electrolyte. , 2015, Dalton transactions.

[30]  Aldo Sorniotti,et al.  Power split strategies for hybrid energy storage systems for vehicular applications , 2014 .

[31]  Jeremy Neubauer,et al.  A Techno-Economic Analysis of PEV Battery Second Use: Repurposed-Battery Selling Price and Commercial and Industrial End-User Value , 2012 .

[32]  Sean B. Walker,et al.  Economic analysis of second use electric vehicle batteries for residential energy storage and load-levelling , 2014 .

[33]  Jorge Moreno,et al.  Ultracapacitor-Based Auxiliary Energy System for an Electric Vehicle: Implementation and Evaluation , 2007, IEEE Transactions on Industrial Electronics.

[34]  A. Emadi,et al.  A New Battery/UltraCapacitor Hybrid Energy Storage System for Electric, Hybrid, and Plug-In Hybrid Electric Vehicles , 2012, IEEE Transactions on Power Electronics.

[35]  Jiang Wu,et al.  Integrated Energy Exchange Scheduling for Multimicrogrid System With Electric Vehicles , 2016, IEEE Transactions on Smart Grid.

[36]  John Krumm,et al.  How People Use Their Vehicles: Statistics from the 2009 National Household Travel Survey , 2012 .

[37]  A. Burke Ultracapacitors: why, how, and where is the technology , 2000 .

[38]  Qinglai Guo,et al.  Factor Analysis of the Aggregated Electric Vehicle Load Based on Data Mining , 2012 .

[39]  M. Verbrugge,et al.  Cycle-life model for graphite-LiFePO 4 cells , 2011 .

[40]  A. Garrigos,et al.  Electric Vehicle Battery Life Extension Using Ultracapacitors and an FPGA Controlled Interleaved Buck–Boost Converter , 2013, IEEE Transactions on Power Electronics.

[41]  Jeremy Neubauer,et al.  The ability of battery second use strategies to impact plug-in electric vehicle prices and serve uti , 2011 .

[42]  Jianqiu Li,et al.  A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .

[43]  Joeri Van Mierlo,et al.  Electrical Double-Layer Capacitors in Hybrid Topologies —Assessment and Evaluation of Their Performance , 2012 .

[44]  Vahid Esfahanian,et al.  Optimum sizing and optimum energy management of a hybrid energy storage system for lithium battery life improvement , 2013 .

[45]  Shrikant Misal,et al.  Performance Evaluation of Ultra-Capacitor in Hybrid Energy Storage System for Electric Vehicles , 2013, 2013 7th Asia Modelling Symposium.

[46]  Enrique Romero-Cadaval,et al.  Battery equalization active methods , 2014 .

[47]  Samveg Saxena,et al.  Charging ahead on the transition to electric vehicles with standard 120 V wall outlets , 2015 .