In-Process and On-Machine Measurement of Machining Accuracy for Process and Product Quality Management: A Review

[1]  Zi-qiang Yin,et al.  Exact straightness reconstruction for on-machine measuring precision workpiece , 2005 .

[3]  Albert Weckenmann,et al.  Acceptance of processes: do we need decision rules? , 2000 .

[4]  Zi-qiang Yin,et al.  High accuracy error separation technique for on-machine measuring straightness , 2006 .

[5]  Takanori Yazawa,et al.  Figure error control for diamond turning by in-process measurement , 2005 .

[6]  Tony L. Schmitz,et al.  Sensor design and evaluation for on-machine probing of extruded tool joints , 2011 .

[7]  Daisuke Kono,et al.  In-situ Measurement by Using a Measurement-Fused Machining System , 2010 .

[8]  Claus P. Keferstein,et al.  Process monitoring in non-circular grinding with optical sensor , 2008 .

[9]  M. Shiraishi,et al.  Scope of in-process measurement, monitoring and control techniques in machining processes—Part 2: In-process techniques for workpieces , 1988 .

[10]  Daisuke Kono,et al.  Measurement of the Copying Rate of Tool Edge Motions by Using a Measurement-Fused Machining System , 2009 .

[11]  Soichi Ibaraki,et al.  Indirect Measurement of Volumetric Accuracy for Three-Axis and Five-Axis Machine Tools: A Review , 2012 .

[12]  Naotake Mohri,et al.  Multiple degrees-of-freedom arm with passive joints for on-the-machine measurement system by calibrating with geometric solids , 1999 .

[13]  Takashi Nomura,et al.  Shape measurements of mirror surfaces with a lateral-shearing interferometer during machine running , 1998 .

[14]  Takashi Nomura,et al.  Shape measurement of workpiece surface with zone-plate interferometer during machine running , 1993 .

[15]  M. Shiraishi,et al.  Scope of in-process measurement, monitoring and control techniques in machining processes—Part 3: In-process techniques for cutting processes and machine tools , 1989 .

[17]  Yuichi Okazaki,et al.  In-process measurement and workpiece-refered form accuracy control. (1st report). Concept of the method and preliminary experiment. , 1988 .

[18]  Yasuhiro Takaya,et al.  High Precision Tool Cutting Edge Monitoring Using Laser Diffraction for On-Machine Measurement , 2012, Int. J. Autom. Technol..

[20]  J. A. Yagüe,et al.  Self-centering probes with parallel kinematics to verify machine-tools , 2006 .

[21]  Masaomi Tsutsumi,et al.  Development of Measurement for Motion Accuracy of 5 Axis NC Machine Tool , 2008, Int. J. Autom. Technol..

[22]  Takashi Ueda,et al.  On The Measurement of Temperature in Material Removal Processes , 2007 .

[23]  Yuichi Okazaki,et al.  In-process measurement and a workpiece-referred form accuracy control system (WORFAC): concept of the method and preliminary experiment , 1989 .

[24]  Hayato Yoshioka,et al.  Status Monitoring of Ultraprecision Machining Using Micro Thermo Sensor and AE Sensor , 2009, Int. J. Autom. Technol..

[25]  Soichi Ibaraki,et al.  Monitoring and Control of Cutting Forces in Machining Processes: A Review , 2009, Int. J. Autom. Technol..

[26]  Xiang Jiang,et al.  In situ real-time measurement for micro-structured surfaces , 2011 .

[27]  Yi Yang,et al.  On-Machine Measurement of Tool Cutting Edge Profiles , 2009, Int. J. Autom. Technol..

[28]  Wei Gao,et al.  Measurement and compensation of error motions of a diamond turning machine , 2007 .

[29]  Kiyoshi Takamasu,et al.  Multi-probe scanning system comprising three laser interferometers and one autocollimator for measuring flat bar mirror profile with nanometer accuracy , 2011 .

[30]  Yukitoshi Ihara,et al.  Ball Bar Measurement on Machine Tools with Rotary Axes , 2012, Int. J. Autom. Technol..

[31]  Atsushi Taguchi,et al.  Optical 3D profilometer for in-process measurement of microsurface based on phase retrieval technique , 2004 .

[32]  Takashi Nomura,et al.  On-machine shape measurement of workpiece surface with Fizeau interferometer , 1992 .

[33]  Christophe Tournier,et al.  In situ non-contact measurements of surface roughness , 2012 .

[34]  Shigeru Ueno.  On Machine Measuring System for Machine Tools , 2009 .

[35]  D. Stoebener,et al.  An Ultrasound In-Process-Measuring System to Ensure a Minimum Roundness Deviation for Rings During Turning , 2007 .

[36]  Takanori Yazawa,et al.  In-process measurement and workpiece-referred form accuracy control system (WORFAC): application to cylindrical turning using an ordinary lathe , 1996 .

[37]  N. Taniguchi.  Current Status in, and Future Trends of, Ultraprecision Machining and Ultrafine Materials Processing , 1983 .

[38]  Eric R. Marsh,et al.  In-process measurement of form error and force in cylindrical-plunge grinding , 2008 .

[39]  Katsushi Furutani,et al.  Automatic compensation for grinding wheel wear by pressure based in-process measurement in wet grinding , 2003 .

[40]  Kimiyuki Mitsui,et al.  On-Machine Optical Surface Profile Measuring System for Nano-Machining , 2011, Int. J. Autom. Technol..

[41]  Soichi Ibaraki,et al.  Identification of Motion Error Sources on Five-axis Machine Tools by Ball-bar Measurements (1st Report) , 2010 .

[42]  J. J. Aguilar,et al.  Influence of measurement noise and laser arrangement on measurement uncertainty of laser tracker multilateration in machine tool volumetric verification , 2013 .

[43]  Wei Gao,et al.  On-machine measurement of a cylindrical surface with sinusoidal micro-structures by an optical slope sensor , 2006 .