Effect of the blade loading distribution on hydrodynamic performance of a centrifugal pump with cylindrical blades

The effect of the blade loading distribution on head, radial force and pressure pulsation of a low specific-speed centrifugal pump with cylindrical impeller blades were investigated in the present study. Blade shapes were obtained by adopting the 1D inverse design method, impellers with different blade loading curves were obtained while the distribution of the blade loading was carefully tailored. Threedimensional URANS simulation method based on the Shear stress transport (SST) k-ω turbulence model was employed for the analyzation of flow patterns. Numerical results including the pressure distribution and velocity profile were validated by comparing with the available experimental data, and an acceptable agreement was obtained. Three typical parameters of the blade loading curve, including the location of the fore-loading point (mpre), location of the aft-loading point (mpost) and slope of the rectilinear segment (K), were analyzed. Results showed that the well-designed blade loading curve, such as the fore-loading impeller, can effectively reduce the pressure pulsation amplitude and the radial force. The significant effect of the variation of the aft-loading point on pump hydrodynamic performance was also investigated. Meanwhile, pressure and velocity distributions at different slopes of the blade loading curves show that the fore-loading impeller produces more uniform flow issuing from the impeller than that of the pump with aft-loading impeller, thus reduces the radial force and pressure pulsation of the pump.

[1]  Wei Wei,et al.  Comparison of cavitation prediction for a centrifugal pump with or without volute casing , 2013 .

[2]  Yoshinobu Tsujimoto,et al.  A review of cavitation in hydraulic machinery , 2016 .

[3]  Giovanna Cavazzini,et al.  Using splitter blades to improve suction performance of centrifugal impeller pumps , 2015 .

[4]  J. Zou,et al.  Interactions between two oscillating bubbles in a rigid tube , 2015 .

[5]  Mehrdad Raisee,et al.  Effects of Volute Curvature on Performance of a Low Specific-Speed Centrifugal Pump at Design and Off-Design Conditions , 2015 .

[6]  Motohiko Nohmi,et al.  Hydrodynamic Design System for Pumps Based on 3-D CAD, CFD, and Inverse Design Method , 2002 .

[7]  Ronald D. Flack,et al.  Effect of Relative Impeller-to-Volute Position on Hydraulic Efficiency and Static Radial Force Distribution in a Circular Volute Centrifugal Pump , 2000 .

[8]  Jorge Parrondo,et al.  Steady and unsteady radial forces for a centrifugal pump with impeller to tongue gap variation , 2006 .

[9]  Jianping Yuan,et al.  Numerical simulation of leading edge cavitation within the whole flow passage of a centrifugal pump , 2013 .

[10]  Shouqi Yuan,et al.  Effects of Splitter Blades on the Unsteady Flow of a Centrifugal Pump , 2012 .

[11]  Ning Zhang,et al.  Experimental and numerical analysis of unsteady pressure pulsation in a centrifugal pump with slope volute , 2015 .

[12]  Hydraulic Plant,et al.  The Flow in Volutes and Its Effect on Centrifugal Pump Performance , 1963 .

[13]  M Zangeneh,et al.  On the role of three-dimensional inverse design methods in turbomachinery shape optimization , 1999 .

[14]  M. Zangeneh,et al.  A compressible three‐dimensional design method for radial and mixed flow turbomachinery blades , 1991 .

[15]  Peng Wang,et al.  Multi-objective optimization of a mixed-flow pump impeller using modified NSGA-II algorithm , 2015 .

[16]  A. Khalifa.  Effect of Blade Exit Shape on Performance and Vibration of a Double Volute Centrifugal Pump , 2014 .

[17]  N. P. Kruyt,et al.  Experimental and theoretical study of the flow in the volute of a low specific-speed pump , 2001 .

[18]  M. Younsi,et al.  Influence of Splitter Blades on the Flow Field of a Centrifugal Pump:Test-Analysis Comparison , 2007 .

[19]  Mehrdad Raisee,et al.  Effect of the volute tongue profile on the performance of a low specific speed centrifugal pump , 2015 .

[20]  Kwang-Yong Kim,et al.  Three-objective optimization of a centrifugal pump with double volute to minimize radial thrust at off-design conditions , 2016 .

[21]  P. Dupont,et al.  Static pressure recovery analysis in the vane island diffuser of a centrifugal pump , 2016 .

[22]  Ting Chen,et al.  Instability of large-scale prototype Francis turbines of Three Gorges power station at part load , 2016 .

[23]  Dazhuan Wu,et al.  Effect of stacking conditions on performance of a centrifugal pump , 2017 .