Effects of deformation temperature on the evolution of second-phase and mechanical properties of large 2219 Al-Cu alloy rings

[1]  You-ping Yi,et al.  Effects of Warm Rolling Deformation on the Microstructure and Ductility of Large 2219 Al–Cu Alloy Rings , 2019, Metals and Materials International.

[2]  You-ping Yi,et al.  An improved process for grain refinement of large 2219 Al alloy rings and its influence on mechanical properties , 2019, Journal of Materials Science & Technology.

[3]  You-ping Yi,et al.  Effects of deformation temperature on second-phase particles and mechanical properties of 2219 Al-Cu alloy , 2018 .

[4]  You-ping Yi,et al.  Effects of cold predeformation on dissolution of second-phase Al2Cu particles during solution treatment of 2219 Al-Cu alloy forgings , 2018 .

[5]  Jiangwei Wang,et al.  Atomic-scale mechanism of the θ″ → θ′ phase transformation in Al-Cu alloys , 2017 .

[6]  L. Zhuang,et al.  The mechanism of grain refinement and plasticity enhancement by an improved thermomechanical treatment of 7055 Al alloy , 2017 .

[7]  Zhilin Liu,et al.  Investigation on the Manufacture of a Large‐Scale Aluminum Alloy Ingot: Microstructure and Macrosegregation   , 2017 .

[8]  P. Huang,et al.  Atomistic study of fundamental character and motion of dislocations in intermetallic Al2Cu , 2016 .

[9]  A. Patra,et al.  Effects of Mechanical Alloying on Solid Solubility , 2016 .

[10]  A. Zarei‐Hanzaki,et al.  The second phase particles and mechanical properties of 2124 aluminum alloy processed by accumulative back extrusion , 2014 .

[11]  Fucheng Zhang,et al.  Fatigue crack growth behavior of a coarse- and a fine-grained high manganese austenitic twin-induced plasticity steel , 2014 .

[12]  Alex Penlington.  Static Recovery Modeling of Dislocation Density in a Cold Rolled Clad Aluminum Alloy , 2013 .

[13]  Qinglong Zhao,et al.  Modelling work hardening of aluminium alloys containing dispersoids , 2013 .

[14]  Ali A. Roostaei,et al.  Evaluating the mechanical properties of a thermomechanically processed unmodified A356 Al alloy employing shear punch testing method , 2013 .

[15]  Su-min Zeng,et al.  Reprecipitation behavior in Al–Cu binary alloy after severe plastic deformation-induced dissolution of θ′ particles , 2012 .

[16]  S. Ringer,et al.  A study of the composition dependence of the rapid hardening phenomenon in Al–Cu–Mg alloys using diffusion couples , 2012 .

[17]  A. Deschamps,et al.  Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy , 2011 .

[18]  S. Pathak,et al.  Effect of microstructure and strength on the fracture behavior of AA2219 alloy , 2009 .

[19]  Zeng Su-min.  Dissolution behavior of second phases in Al-Cu binary alloy during severe plastic deformation , 2009 .

[20]  Junhui Li,et al.  Interface mechanism of ultrasonic flip chip bonding , 2007 .

[21]  M. Starink,et al.  Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys , 2005 .

[22]  M. Starink,et al.  Estimation of dislocation densities in cold rolled Al‐Mg‐Cu‐Mn alloys by combination of yield strength data, EBSD and strength models , 2005, Journal of microscopy.

[23]  D. Lesuer,et al.  Deformation behavior of a 2219 Al alloy , 2002 .

[24]  T. Pasang,et al.  Ductile-to-brittle fracture transitions in 8090 Al–Li alloys , 2001 .

[25]  A. Zhu,et al.  Strengthening effect of unshearable particles of finite size: a computer experimental study , 1999 .

[26]  K. Chawla,et al.  Mechanical Behavior of Materials , 1998 .

[27]  P. Houtte,et al.  Dislocation cell formation and hot ductility in an Al–Mg–Cu alloy , 1998 .

[28]  Q. Fang,et al.  Theory of Nonlinear Anelastic Internal Friction Peaks. I. The Migration of Solute Atoms in Dislocation Core , 1996 .

[29]  K. Easterling,et al.  Phase Transformations in Metals and Alloys , 2021 .