Welding Metallurgy and Weldability

[1]  W. F. Savage,et al.  Copper-Contamination Cracking in the Weld Heat-Affected Zone , 2013 .

[2]  D. Metzler.  A Gleeble®-based Method for Ranking the Strain-Age Cracking Susceptibility of Ni-Based Superalloys , 2008 .

[3]  H. Wortel.  Control Of Relaxation Cracking In Austenitic High Temperature Components , 2007 .

[4]  David Kinderlehrer,et al.  Morphological Stability of a Particle Growing by Diffusion or Heat Flow , 1999 .

[5]  H. Granjon.  Fundamentals of welding metallurgy , 1991 .

[6]  W. F. Savage,et al.  Stress relaxation and strain-age cracking in Rene 41 weldments , 1974 .

[7]  D. W. Dickinson,et al.  Prediction of Lamellar Tearing Susceptibility by Mechanical Testinj , 2013 .

[8]  C. Meitzner.  STRESS RELIEF CRACKING IN STEEL WELDMENTS , 1975 .

[9]  V. G. Smith,et al.  a Mathematical Analysis of Solute Redistribution during Solidification , 1955 .

[10]  J. M. Vitek,et al.  Correlation between solidification parameters and weld microstructures , 1989 .

[11]  T. G. Gooch.  Corrosion behavior of welded stainless steel , 1996 .

[12]  D. Mckeown.  RE-HEAT CRACKING IN HIGH NICKEL ALLOY HEAT-AFFECTED ZONES. , 1971 .

[13]  W. P. Hughes,et al.  A STUDY OF THE STRAIN-AGE CRACKING CHARACTERISTICS IN WELDED RENE 41: PHASE I. , 1967 .

[14]  C. Mcmahon,et al.  Mechanisms of stress relief cracking in a ferritic steel , 1984 .

[15]  J. Lippold,et al.  Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar metal welds - Part 2: On-cooling transformations , 2000 .

[16]  M. J. Lucas.  The Welded Heat-Affected zone in Nickel Base Alloy 718 , 1970 .

[17]  A. Vinckier,et al.  WRC bulletin. A review of underclad cracking in pressure-vessel components , 1974 .

[18]  Maraging Steels.  The Weld Heat-Affected Zone of the 18Ni , 2013 .

[19]  W. F. Savage,et al.  Unmixed zone formation in austenitic stainless steel weldments. [18 Cr-8 Ni weldments] , 1979 .

[20]  M. Prager,et al.  Evaluating the resistance of Rene 41 to strain-age cracking , 1970 .

[21]  C. V. Robino,et al.  The Mechanism of Stress-Relief Cracking in a Ferritic Alloy Steel A novel stress-relaxation technique and extensive microstructural characterization of the carbide precipitation, elemental segregation, and fracture modes were used to investigate stress-relief cracking in a ferritic alloy steel , 2003 .

[22]  R. D. Thomas,et al.  Welding type 347 stainless steel -- An interpretive report , 1997 .

[23]  M. Rowe.  Ranking the resistance of wrought superalloys to strain-age cracking , 2006 .

[24]  W. Baeslack,et al.  Nature of Grain Refinement in Titanium Alloy Welds by Microcooler Inoculation , 1990 .

[25]  J. Knott,et al.  A study of stress relief cracking in 214 Cr 1 Mo steel—II. The effects of multi-component segregation , 1982 .

[26]  B. Ernst,et al.  Weldability of High-Strength , Low-Expansion Superalloys Weld solidification and HAZ liquation cracking in 900-series superalloys are related to Nb and Si levels , 2013 .

[27]  P. L. Threadgill.  Avoiding HAZ defects in welded structures , 1985 .

[28]  J. Lippold,et al.  A proposed mechanism for equiaxed grain formation along the fusion boundary in aluminum-copper-lithium alloys , 1998 .

[29]  H. Gaytor,et al.  High Temperature Alloys for Gas Turbines , 1975 .

[30]  J. Dupont,et al.  Effect of composition on the solidification behavior of several Ni-Cr-Mo and Fe-Ni-Cr-Mo alloys , 2006 .

[31]  E. J. Galda,et al.  Stress Relief Cracking in Pressure Vessel Steels Stress relief cracking in A 517 F and A 533 A can be reduced by preheat and increased heat input , 2013 .

[32]  N. Petch,et al.  The Cleavage Strength of Polycrystals , 1953 .

[33]  Factors Influencing Strain-Age Cracking in Inconel X-750 , 2013 .

[34]  W. F. Savage,et al.  Liquid-Metal Embrit t lement of the Heat-Affected Zone by Copper Contaminat ion The mechanism responsible for copper-contamination hot cracking in the weld heat-affected zone is identified as liquidmetal embrittlement , 2013 .

[35]  L. Priester.  Grain Boundaries: From Theory to Engineering , 2012 .

[36]  H. Gleiter.  Theory of grain boundary migration rate , 1969 .

[37]  J. Carlton,et al.  Variables influencing the strain-age cracking and mechanical properties of Rene 41 and related alloys , 1970 .

[38]  M. Prager,et al.  Welding of precipitation-hardening nickel-base alloys , 1968 .

[39]  E. Hall,et al.  The Deformation and Ageing of Mild Steel , 1951 .

[40]  J. Lippold,et al.  Fusion boundary microstructure evolution associated with embrittlement of Ni–base alloy overlays applied to carbon steel , 2013, Welding in the World.

[41]  J. Cahn,et al.  On diffusional mass transport in polycrystals containing stationary or migrating grain boundaries , 1979 .

[42]  J. Lippold,et al.  Weldability of Li-bearing aluminium alloys , 1999 .

[43]  R. E. Hoffman,et al.  The effect of relative crystal and boundary orientations on grain boundary diffusion rates , 1954 .

[44]  S. Katayama.  Solidification phenomena of weld metals (1st report). Characteristic solidification morphologies, microstructures and solidification theory , 2000 .

[45]  W. F. Savage,et al.  Microsegregation in Partially Melted Regions of 70Cu-30Ni Weldments Evidence supports an hypothesis that explains the mechanism of partial melting and its effects , 1976 .

[46]  J. Lippold,et al.  Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar weld metals : Part 1 - Nucleation and growth , 1999 .

[47]  C. R. Heiple.  Mechanism for minor element effect on GTA fusion zone geometry , 1982 .

[48]  W. D. Callister,et al.  Materials Science and Engineering: An Introduction -9/E. , 2015 .

[49]  K. Tamaki,et al.  Reheat Cracking Test on High Strength Steels by a Modified Implant Test , 1983 .

[50]  R. P. Simpson,et al.  Controlled weld-pool solidification structure and resultant properties with yttrium inoculation of Ti--6Al--6V--2Sn welds , 1977 .

[51]  B. Chalmers.  Principles of Solidification , 1964 .

[52]  J. Lippold,et al.  Welding Metallurgy and Weldability of Nickel-Base Alloys , 2009 .

[53]  A. T. D'annessa,et al.  Effect of furnace atmosphere on heat-treat cracking of Rene 41 weldments , 1973 .

[54]  J. Lippold,et al.  The effect of multiple postweld heat treatment cycles on the weldability of Waspaloy , 2002 .

[55]  C. D. Lundin,et al.  Fundamental studies of the metallurgical causes and mitigation of reheat cracking in 1{1/4}Cr-{1/2}Mo and 2{1/4}Cr-1Mo steels , 1996 .

[56]  K. Nishimoto,et al.  EFFECT OF BISMUTH ON REHEAT CRACKING SUSCEPTIBILITY IN TYPE 308 FCA WELD METAL , 1998 .