Silica fume/capric acid-stearic acid PCM included-cementitious composite for thermal controlling of buildings: Thermal energy storage and mechanical properties

[1]  Y. Konuklu,et al.  Effect of pre-treatment methods on natural raw materials-based phase change material composites for building applications , 2020, Construction and Building Materials.

[2]  Y. Ok,et al.  Thermal properties of composite organic phase change materials (PCMs): A critical review on their engineering chemistry , 2020 .

[3]  K. Mo,et al.  Thermal performance of a solar energy storage concrete panel incorporating phase change material aggregates developed for thermal regulation in buildings , 2020 .

[4]  F. Jaramillo,et al.  Systematic review of encapsulation and shape-stabilization of phase change materials , 2020 .

[5]  Dudul Das,et al.  A novel form stable PCM based bio composite material for solar thermal energy storage applications , 2020 .

[6]  Weidong Wu,et al.  Study of a novel ceramsite-based shape-stabilized composite phase change material (PCM) for energy conservation in buildings , 2020 .

[7]  Seong Jin Chang,et al.  Improvement of thermal inertia effect in buildings using shape stabilized PCM wallboard based on the enthalpy-temperature function , 2020 .

[8]  A. Sari,et al.  Form‐Stabilized Polyethylene Glycol/Palygorskite Composite Phase Change Material: Thermal Energy Storage Properties, Cycling Stability, and Thermal Durability , 2020 .

[9]  Xiaojian Gao,et al.  Incorporation of phase change material and carbon nanofibers into lightweight aggregate concrete for thermal energy regulation in buildings , 2020 .

[10]  A. Sari,et al.  Low cost and eco-friendly wood fiber-based composite phase change material: Development, characterization and lab-scale thermoregulation performance for thermal energy storage , 2020 .

[11]  A. E. Martinelli,et al.  Microstructural design and thermal characterization of composite diatomite-vermiculite paraffin-based form-stable PCM for cementitious mortars , 2020, Construction and Building Materials.

[12]  Pushpendra Kumar Singh Rathore,et al.  Potential of macroencapsulated PCM for thermal energy storage in buildings: A comprehensive review , 2019, Construction and Building Materials.

[13]  A. Sari,et al.  Investigation of thermal properties and enhanced energy storage/release performance of silica fume/myristic acid composite doped with carbon nanotubes , 2019, Renewable Energy.

[14]  Gino Bella,et al.  Energetic and exergetic performance evaluation of a solar cooling and heating system assisted with thermal storage , 2019, Energy.

[15]  Y. Konuklu,et al.  Development of pentadecane/diatomite and pentadecane/sepiolite nanocomposites fabricated by different compounding methods for thermal energy storage , 2019, International Journal of Energy Research.

[16]  A. Sari,et al.  Preparation, characterization, thermal energy storage properties and temperature control performance of form-stabilized sepiolite based composite phase change materials , 2019, Energy and Buildings.

[17]  Min Guo,et al.  Low-cost, shape-stabilized fly ash composite phase change material synthesized by using a facile process for building energy efficiency , 2019, Materials Chemistry and Physics.

[18]  G. Fang,et al.  Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials , 2018, Energy.

[19]  M. Ghanbarpour,et al.  Evaluation of a novel solar driven sorption cooling/heating system integrated with PCM storage compartment , 2018, Energy.

[20]  M. A. Medina,et al.  Laboratory assessment of residential building walls containing pipe-encapsulated phase change materials for thermal management , 2018, Energy.

[21]  A. Sari,et al.  Effects of carbon nanotubes additive on thermal conductivity and thermal energy storage properties of a novel composite phase change material , 2018, Journal of Composite Materials.

[22]  Gilles Lefebvre,et al.  Elaboration and properties of a composite bio-based PCM for an application in building envelopes , 2018, Construction and Building Materials.

[23]  Jinhong Li,et al.  Octadecane/C-decorated diatomite composite phase change material with enhanced thermal conductivity as aggregate for developing structural–functional integrated cement for thermal energy storage , 2018 .

[24]  A. Sari,et al.  Preparation, characterization and thermal regulation performance of cement based-composite phase change material , 2018 .

[25]  Farnaz Mohammadi,et al.  The role of synthesis parameters on the workability, setting and strength properties of binary binder based geopolymer paste , 2017 .

[26]  Pengfei Jie,et al.  Experimental study on thermal performance of phase change material passive and active combined using for building application in winter , 2017 .

[27]  A. Sari.  Thermal Energy Storage Properties and Laboratory-Scale Thermoregulation Performance of Bentonite/Paraffin Composite Phase Change Material for Energy-Efficient Buildings , 2017 .

[28]  Arezki Tagnit-Hamou,et al.  Partial substitution of silica fume with fine glass powder in UHPC: Filling the micro gap , 2017 .

[29]  Jay G. Sanjayan,et al.  Thermal Energy Storage Enhancement of Lightweight Cement Mortars with the Application of Phase Change Materials , 2017 .

[30]  José Aguiar,et al.  Influence of adding phase change materials on the physical and mechanical properties of cement mortars , 2016 .

[31]  Y. Konuklu,et al.  Preparation and characterization of sepiolite-based phase change material nanocomposites for thermal energy storage , 2016 .

[32]  Hwai Chyuan Ong,et al.  Preparation and thermal characteristics of eutectic fatty acids/Shorea javanica composite for thermal energy storage , 2016 .

[33]  Ahmet Sarı,et al.  Development and thermal performance of pumice/organic PCM/gypsum composite plasters for thermal energy storage in buildings , 2016 .

[34]  Xiangfei Kong,et al.  Building Energy Storage Panel Based on Paraffin/Expanded Perlite: Preparation and Thermal Performance Study , 2016, Materials.

[35]  Seunghwan Wi,et al.  Energy efficient Bio-based PCM with silica fume composites to apply in concrete for energy saving in buildings , 2015 .

[36]  H. Paksoy,et al.  Review on using microencapsulated phase change materials (PCM) in building applications , 2015 .

[37]  Zhengguo Zhang,et al.  Preparation, Mechanical and Thermal Properties of Cement Board with Expanded Perlite Based Composite Phase Change Material for Improving Buildings Thermal Behavior , 2015, Materials.

[38]  Xuming Mi,et al.  Study on functional and mechanical properties of cement mortar with graphite-modified microencapsulated phase-change materials , 2015 .

[39]  Aaron R. Sakulich,et al.  Application of phase change materials to improve the thermal performance of cementitious material , 2015 .

[40]  Atul Sharma,et al.  Thermal cycle test of binary mixtures of some fatty acids as phase change materials for building applications , 2015 .

[41]  Zeyu Lu,et al.  Effects of the form-stable expanded perlite/paraffin composite on cement manufactured by extrusion technique , 2015 .

[42]  Zongjin Li,et al.  Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites , 2014 .

[43]  Teuku Meurah Indra Mahlia,et al.  Thermo-physical stability of fatty acid eutectic mixtures subjected to accelerated aging for thermal energy storage (TES) application , 2014 .

[44]  Luigi Marletta,et al.  Simulation of a ventilated cavity to enhance the effectiveness of PCM wallboards for summer thermal comfort in buildings , 2014 .

[45]  H. Cui,et al.  Preparation, characterization and thermal properties of Lauryl alcohol/Kaolin as novel form-stable composite phase change material for thermal energy storage in buildings , 2013 .

[46]  Jisoo Jeon,et al.  Optimal preparation of PCM/diatomite composites for enhancing thermal properties , 2013 .

[47]  Jisoo Jeon,et al.  Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete , 2013 .

[48]  H. Khater.  Effect of silica fume on the characterization of the geopolymer materials , 2013 .

[49]  Zhishen Wu,et al.  Heat storage properties of the cement mortar incorporated with composite phase change material , 2013 .

[50]  Zhengguo Zhang,et al.  Thermal energy storage cement mortar containing n-octadecane/expanded graphite composite phase change material , 2013 .

[51]  Jian Zhang,et al.  Preparation and thermal performance of gypsum boards incorporated with microencapsulated phase change materials for thermal regulation , 2012 .

[52]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in buildings and the effect of adding awnings , 2012 .

[53]  Jie Zhang,et al.  Comparison of methods for arresting hydration of cement , 2011 .

[54]  Yi Wang,et al.  Stearic acid/silica fume composite as form-stable phase change material for thermal energy storage , 2011 .

[55]  M. Amin,et al.  Hydration characteristics of hydrothermal treated cement kiln dust–sludge–silica fume pastes , 2011 .

[56]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[57]  M. Soltan,et al.  Experimental approaches and analytical technique for determining heavy metals in fallen dust at ferrosilicon production factory in Edfu, Aswan, Egypt , 2005, Journal of Zhejiang University Science B.

[58]  J. J. Brooks,et al.  Effect of silica fume on mechanical properties of high-strength concrete , 2004 .

[59]  D. Feldman,et al.  Control aspects of latent heat storage and recovery in concrete , 2000 .