Research progress of monitoring, forecasting, and prevention of rockburst in underground coal mining in China

As one of the dynamic disasters of coal mines, rockburst seriously affects underground safe coal mining. Based on the laboratory test, field test, and theoretical analysis, this study proposed the principle of the rock burst induced by the combination of dynamic and static stresses and divided such rock burst into three types, including induced by primary dynamic stress, mainly induced by dynamic stress, and by dynamic stress in low critical stress state. The expressions of the static stress induced by coal mining and dynamic stress induced by mining tremors were obtained. Moreover, theories and technologies at home and abroad were summarized concerning the monitoring, forecasting, and preventing of rockburst. These mainly include the zoning and leveling forecasting method, electromagnetic radiation technology, elastic wave and seismic wave computed tomography technologies in aspect of rockburst monitoring, as well as the intensity weakening theory, the strong-soft-strong structure effect, the directional hydraulic fracturing technology, the roadway support system in regards of rockburst prevention. The prospect of rockburst development suggested that researches concerning the rockburst mechanism should be quantitatively developed around the roadway and coalface surrounding coal-rock mass. It should be focused on the rockburst mechanism and prevention technology of mining with over 1,000 km deep and mining in large tectonic zone. In addition, the monitoring and prevention of rockburst should be based on rockburst mechanism.

[1]  Guo-fa Wang,et al.  New development of sets equipment technologies for coal mine long-wall face in China , 2012 .

[2]  G. Dezhong,et al.  Electromagnetic emissions in rock and coal burst failures , 2001 .

[3]  He Hu Experimental Study on the Correlation Between Stress and P-Wave Velocity for Burst Tendency Coal-Rock Samples , 2012 .

[4]  N.G.W. Cook,et al.  A note on rockbursts considered as a problem of stability , 1965 .

[5]  K. Luxbacher,et al.  Three-dimensional time-lapse velocity tomography of an underground longwall panel , 2008 .

[6]  Xueqiu He,et al.  Comprehensive monitoring technique based on electromagnetic radiation and its applications to mine pressure , 2012 .

[7]  A. Kidybiński,et al.  Bursting liability indices of coal , 1981 .

[8]  Li Zhi-hua Assessment of rock burst danger and application on electromagnetic emission method , 2008 .

[9]  A. M. Linkov,et al.  THE THEORY OF POST-FAILURE DEFORMATIONS AND THE PROBLEM OF STABILITY , 1979 .

[10]  S. P. Singh,et al.  Burst energy release index , 1988 .

[11]  Lu Caiping,et al.  OPTIMIZATION ALGORITHM OF NETWORK CONFIGURATION FOR IMPROVING LOCATION ACCURACY OF MICROSEISM IN COAL MINE , 2012 .

[12]  Xuwei Li,et al.  Active velocity tomography for assessing rock burst hazards in a kilometer deep mine , 2011 .

[13]  A. Lurka Location of high seismic activity zones and seismic hazard assessment in Zabrze Bielszowice coal mine using passive tomography , 2008 .

[14]  E. T. Brown,et al.  Rock Mechanics: For Underground Mining , 1985 .

[15]  Yao Jing-ming,et al.  Intensity weakening theory for rockburst and its application , 2005 .

[16]  Pan Yishan THEORETICAL ANALYSIS AND EXPERIMENTAL RESEARCH ON ROCKBURST PREVENTION MECHANISM OF RIGID-FLEXIBLE-RIGID SUPPORTING STRUCTURE , 2012 .

[17]  Wang Kai,et al.  Strong-soft-strong mechanical model for controlling roadway surrounding rock subjected to rock burst and its application , 2008 .

[18]  Pan Jun-feng Status and Prospect of Rock-burst Monitoring and Alarm Technology in Chinese Coal Mine , 2012 .

[19]  Bangyou Jiang,et al.  Field test of rock burst danger based on drilling pulverized coal parameters , 2012 .

[20]  Guo Yu-shun Prevention Mechanism of Roadway Supported by Bolt-Mesh Subjected to Rock Burst and Degree Calculation , 2009 .

[21]  Wang Enyuan,et al.  Electromagnetic emission technique of monitoring rock burst and its application , 2004 .

[22]  Li Xiao-lu Rigid-Flexibility Integrated Energy Absorption Support Technology Applied in Deep Mine with Pressure Bumping , 2013 .

[23]  Li Zhong-hua,et al.  The Model of Energy-Absorbing Coupling Support and Its Application in Rock Burst Roadway , 2011 .

[24]  Xun Luo,et al.  Tomographic Imaging of Rock Conditions Ahead of Mining Using the Shearer as a Seismic Source—A Feasibility Study , 2009, IEEE Transactions on Geoscience and Remote Sensing.

[25]  王书文,et al.  Study Status and Prospects of Mine Pressure Bumping Control Technology in China , 2013 .

[26]  He Xue-qiu Technique of Classification Forecasting Rock Burst in Coal Mines , 2007 .

[27]  Zhang Xue-fei Mechanism of Rockburst Prevention and Supporting Control Technology in Roadways , 2010 .

[28]  Hu He,et al.  Rockburst hazard determination by using computed tomography technology in deep workface , 2012 .

[29]  Hu He,et al.  Deep-hole directional fracturing of thick hard roof for rockburst prevention , 2012 .

[30]  Feng Mei-hua Rockburst hazard evaluation model based on seismic CT technology , 2012 .