Mechanism of the Delayed Growth of Intermetallic Compound at the Interface between Sn−4.0Ag−0.5Cu and Cu−Zn Substrate

A Cu−Zn wetting layer was very effective to depress the excessive growth of intermetallic compound (IMC). The effect of Zn addition to the Cu layer on the IMC growth and microvoid formation in the solder interface was similar to the effect of Zn addition into the Sn-Ag-Cu (SAC) solders. In this study, the mechanism of slow IMC growth at the SAC/Cu−Zn interfaces was investigated. As the aging time increased, Zn atoms accumulated at the Cu6Sn5/Cu interface and formed a Zn-rich layer. By adding Zn into the Cu wetting layer, the IMC growth was delayed due to the retardation of the formation of the Cu3Sn layer. Since the low driving force for the formation of Cu3Sn became smaller by adding Zn, the diffusion of Cu in Cu−Zn into SAC solder was delayed. Also, the CuZn phase formed at the Cu6Sn5/Cu−Zn interface plays a role as a diffusion barrier of interdiffusion of Cu and Sn.

[1]  Paul T. Vianco,et al.  Solid-state intermetallic compound layer growth between copper and 95.5Sn-3.9Ag-0.6Cu solder , 2004 .

[2]  Xin Ma,et al.  Study on reactive wetting of Sn0.7Cu-xZn lead-free solders on Cu substrate , 2005, 2005 6th International Conference on Electronic Packaging Technology.

[3]  M. Abtew,et al.  Lead-free Solders in Microelectronics , 2000 .

[4]  James C. Foley,et al.  Alloying effects in near-eutectic Sn-Ag-Cu solder alloys for improved microstructural stability , 2001 .

[5]  Hyuck-Mo Lee,et al.  Wettability and interfacial reactions of Sn-based Pb-free solders with Cu–xZn alloy under bump metallurgies , 2009 .

[6]  Young-Ho Kim,et al.  Sn-Ag-Cu and Sn-Cu solders: Interfacial reactions with platinum , 2004 .

[7]  Y. Chan,et al.  Effect of indium addition in Sn-rich solder on the dissolution of Cu metallization , 2005 .

[8]  Da-Yuan Shih,et al.  Effects of Minor Additions of Zn on Interfacial Reactions of Sn-Ag-Cu and Sn-Cu Solders with Various Cu Substrates during Thermal Aging , 2007 .

[9]  K. S. Kim,et al.  Effects of fourth alloying additive on microstructures and tensile properties of Sn-Ag-Cu alloy and joints with Cu , 2003, Microelectron. Reliab..

[10]  Chunqing Wang,et al.  Electronic structure mechanism for the wettability of Sn-based solder alloys , 2002 .

[11]  C. Kao,et al.  Strong Zn concentration effect on the soldering reactions between Sn-based solders and Cu , 2006 .

[12]  Yiyu Qian,et al.  Improvement of microstructure and interface structure of eutectic Sn–0.7Cu solder with small amount of Zn addition , 2005 .

[13]  Chi‐Man Lawrence Wu,et al.  Properties of lead-free solder alloys with rare earth element additions , 2004 .

[14]  Koichi Niihara,et al.  Wetting and interface microstructure between Sn–Zn binary alloys and Cu , 1998 .

[15]  Jin Yu,et al.  Controlling Ag3Sn plate formation in near-ternary-eutectic Sn-Ag-Cu solder by minor Zn alloying , 2004 .

[16]  Jin Yu,et al.  Interfacial reactions of Sn-Ag-Cu solders modified by minor Zn alloying addition , 2006 .

[17]  H. Kent Bowen,et al.  Basic research needs on high temperature ceramics for energy applications , 1980 .

[18]  R. Boudreau.  Foreword contributions from the 50th electronic components and technology conference , 2001 .

[19]  Kazuaki Ano,et al.  Kirkendall void formation in eutectic SnPb solder joints on bare Cu and its effect on joint reliability , 2005 .

[20]  Jenq-Gong Duh,et al.  Interfacial Reaction of Sn and Cu-xZn Substrates After Reflow and Thermal Aging , 2010 .

[21]  Sung K. Kang.  Development of lead (Pb)-free interconnection materials for microelectronics , 1999 .

[22]  Young-Ho Kim,et al.  A new solder wetting layer for Pb-free solders , 2009 .

[23]  Jin Yu,et al.  Effect of Zn on the intermetallics formation and reliability of Sn-3.5Ag solder on a Cu pad , 2007 .

[24]  Feng Gao,et al.  Depressing effect of 0.2wt.%Zn addition into Sn-3.0Ag-0.5Cu solder alloy on the intermetallic growth with Cu substrate during isothermal aging , 2006 .