A simple mathematical model of a vehicle with seat and occupant for studying the effect of vehicle dynamic parameters on ride comfort

A mathematical model of a vehicle dynamic system capable of predicting ride comfort can be a useful tool for vehicle design and development engineers at the concept design stage. The aim of this study was to develop a simple mathematical model of a vehicle with seat and occupant to investigate how vehicle dynamic parameters affect the vibration transmission and ride quality. A 13 degrees-offreedom mathematical model including tyre, suspension, vehicle body, engine and mounting, seat and occupant was developed and calibrated with measured data. Acceleration transfer functions from road input to the seat and occupant were calculated. Sensitivity analyses with a Design of Experiment method was conducted to identify the vehicle parameters that were most influential on the ride quality in terms of the frequency weighted acceleration r.m.s. values at the seat rail and the seat-occupant interface under random vibration input in the vertical direction. Results showed that the seat vibration was most sensitive to the damping and stiffness of the rear suspension, the stiffness of the tyre and the seat. The location of the engine block also has significant effect on the ride vibration. The proposed model can be used by engineers to quickly assess how ride comfort of a vehicle is affected by the design parameters.

[1]  Michael J. Griffin,et al.  A model of the vertical apparent mass and the fore-and-aft cross-axis apparent mass of the human body during vertical whole-body vibration , 2009 .

[2]  Amir Khajepour,et al.  Ride quality evaluation of a vehicle with a planar suspension system , 2012 .

[3]  Michael J. Griffin,et al.  An analytic model of the in-line and cross-axis apparent mass of the seated human body exposed to vertical vibration with and without a backrest , 2011 .

[4]  Steffen Pankoke,et al.  Virtual optimisation of car passenger seats: Simulation of static and dynamic effects on drivers’ seating comfort , 2008 .

[5]  Hamid Reza Karimi,et al.  A Frequency Compensation Algorithm of Four-Wheel Coherence Random Road , 2013 .

[6]  Anne Marsden,et al.  International Organization for Standardization , 2014 .

[7]  M. Naraghi.  Optimizing Vehicle Response in a Combined Ride and Handling Full Car Model by Optimal Control Strategies , 2001 .

[8]  Katsuhiko Ogata,et al.  Modern Control Engineering , 1970 .

[9]  M. Griffin,et al.  A MODAL ANALYSIS OF WHOLE-BODY VERTICAL VIBRATION, USING A FINITE ELEMENT MODEL OF THE HUMAN BODY , 1997 .

[10]  Jan A. Snyman,et al.  Optimisation of road vehicle passive suspension systems. Part 2. Qualification and case study , 2003 .

[11]  Loganathan BalaMurugan,et al.  An investigation on semi-active suspension damper and control strategies for vehicle ride comfort and road holding , 2012, J. Syst. Control. Eng..

[12]  Michael J. Griffin,et al.  Modelling the fore-and-aft apparent mass of the human body and the transmissibility of seat backrests , 2011 .

[13]  L. Wei,et al.  THE PREDICITON OF SEAT TRANSMISSIBILITY FROM MEASURES OF SEAT IMPEDANCE , 1998 .

[14]  Xavier Moreau,et al.  Hybrid Control of a Semi-Active Suspension System , 2001 .

[15]  M. Pennati,et al.  Parameter Sensitivity Analysis of a Passenger/Seat Model for Ride Comfort Assessment , 2011 .

[16]  M J Griffin,et al.  Modelling the dynamic mechanisms associated with the principal resonance of the seated human body. , 2001, Clinical biomechanics.

[17]  Michael J. Griffin,et al.  Handbook of Human Vibration , 1990 .

[18]  Michael J. Griffin,et al.  MATHEMATICAL MODELS FOR THE APPARENT MASS OF THE SEATED HUMAN BODY EXPOSED TO VERTICAL VIBRATION , 1998 .

[19]  James L. Swayze,et al.  Suspension Force Optimization Using Quarter-Car Model with Elastomeric Elements , 1999 .

[20]  Hong Hee Yoo,et al.  Ride comfort uncertainty analysis and reliability design of a passenger vehicle undergoing random road excitation , 2013 .

[21]  R. Lenth.  Quick and easy analysis of unreplicated factorials , 1989 .

[22]  Michael J Griffin,et al.  Developing a simplified finite element model of a car seat with occupant for predicting vibration transmissibility in the vertical direction , 2015, Ergonomics.

[23]  M J Griffin,et al.  The apparent mass of the seated human body: vertical vibration. , 1989, Journal of biomechanics.

[24]  Zhang Yonglin,et al.  Numerical simulation of stochastic road process using white noise filtration , 2006 .

[25]  T D Gillespie,et al.  Fundamentals of Vehicle Dynamics , 1992 .

[26]  Virgil L. Anderson,et al.  Applied factorial and fractional designs , 1984 .

[27]  Kazem Reza Kashyzadeh,et al.  Investigating the effect of road roughness on automotive component , 2014 .

[28]  Yubo Zhang,et al.  4-DOF Vehicle Ride Model , 2002 .

[29]  Cho-Chung Liang,et al.  Modeling of a seated human body exposed to vertical vibrations in various automotive postures. , 2008, Industrial health.

[30]  Michael J. Griffin,et al.  Finite element modelling of human-seat interactions: vertical in-line and fore-and-aft cross-axis apparent mass when sitting on a rigid seat without backrest and exposed to vertical vibration , 2015, Ergonomics.

[31]  B. Hamedi,et al.  Improving the Ride & Handling Qualities of a Passenger Car via Modification of its Rear Suspension Mechanism , 2000 .

[32]  Taehyun Shim,et al.  Understanding the limitations of different vehicle models for roll dynamics studies , 2007 .

[33]  Yubo Zhang,et al.  Quarter Vehicle Ride Model , 2002 .

[34]  Anil K. Bajaj,et al.  Simplified models of the vibration of mannequins in car seats , 2003 .