Isophote-based ruled surface approximation of free-form surfaces and its application in NC machining

This paper presents a method to approximate free-form surfaces using piecewise ruled surface and its application in five-axis NC machining. New concepts of isophote, iso-inclination curve and iso-inclination angle are introduced to facilitate the generation of the piecewise ruled surfaces. The resulting ruled surfaces are adaptive to the surface features, such as peaks and valleys. Adjusting the isoinclination angle controls the error of this approximation. The application of the isophote-based ruled surface approximation in five-axis NC machining is also studied. The tapered tools are suggested to cut the ruled surfaces. Methods for selecting appropriate tools and generating tool paths are presented. The present case studies show that the new approach may lead to the integration of rough, semi-finish and finish machining of free-form surfaces.

[1]  Byoung Kyu Choi,et al.  Ball-end cutter interference avoidance in NC machining of sculptured surfaces , 1989 .

[2]  Bahram Ravani,et al.  Bertrand offsets of ruled and developable surfaces , 1991, Comput. Aided Des..

[3]  Sanjay Joshi,et al.  Determining feasible tool-approach directions for machining Bézier curves and surfaces , 1991, Comput. Aided Des..

[4]  Gershon Elber,et al.  5-Axis Freeform Surface Milling Using Piecewise Ruled Surface Approximation , 1997 .

[5]  Michel A. Melkanoff,et al.  Nc Machine Programming and Software Design , 1989 .

[6]  H. Persson,et al.  NC machining of arbitrarily shaped pockets , 1978 .

[7]  Daniel C. H. Yang,et al.  Interference detection and optimal tool selection in 3-axis NC machining of free-form surfaces , 1999, Comput. Aided Des..

[8]  Daniel C. H. Yang,et al.  Iso-phote Based Tool-path Generation for Machining Free-form Surfaces , 1999 .

[9]  Kunwoo Lee,et al.  NC milling tool path generation for arbitrary pockets defined by sculptured surfaces , 1990, Comput. Aided Des..

[10]  Yuan-Shin Lee,et al.  2-Phase approach to global tool interference avoidance in 5-axis machining , 1995, Comput. Aided Des..

[11]  J. S. Hwang.  Interference-free tool-path generation in the NC machining of parametric compound surfaces , 1992, Comput. Aided Des..

[12]  Gábor Lukács,et al.  Pocket machining based on contour-parallel tool paths generated by means of proximity maps , 1994, Comput. Aided Des..

[13]  P. Broomhead,et al.  Generating NC data at the machine tool for the manufacture of free-form surfaces , 1986 .

[14]  Fritz Rehsteiner,et al.  Collision-Free Five-Axis Milling of Twisted Ruled Surfaces , 1993 .

[15]  James E. Bobrow,et al.  NC machine tool path generation from CSG part representations , 1985 .

[16]  James H. Oliver,et al.  Integrated simulation, error assessment, and tool path correction for five-axis NC milling , 1995 .

[17]  B. Gaál,et al.  Experiences and further development of the FFS (free-form shapes) CAD/CAM system , 1985 .

[18]  Gregory C Loney,et al.  NC machining of free form surfaces , 1987 .

[19]  James H. Oliver,et al.  Gouge Detection Algorithms for Sculptured Surface NC Generation , 1993 .

[20]  Krishnan Suresh,et al.  Constant Scallop-height Machining of Free-form Surfaces , 1994 .

[21]  D. C. H. Yang,et al.  Nearly arc-length parameterized quintic-spline interpolation for precision machining , 1993, Comput. Aided Des..