Experimental investigation of the behavior of RC bridge piers subjected to horizontal and vertical earthquake motion

Abstract This paper presents an experimental program aimed at assessing the effect of vertical earthquake ground motion on reinforced concrete bridge piers. The program comprised testing of four large scale piers by utilizing the Multi-Axial Full-Scale Sub-Structured Testing and Simulation (MUST-SIM) facility at the University of Illinois. Two hybrid analytical-experimental simulations were used to experimentally investigate the effects of vertical ground motion on pier loading and behavior. Two additional cyclic tests were conducted to allow direct comparison of pier response under tension to pier response under compression. Detail aspects of the experimental framework including a substructuring scheme, analytical representation of structure, test specimen design and advanced measurement system are provided. The observations and interpretation of experimental results, including the impact on both global and local behavior, are discussed. It is concluded that vertical ground motion can significantly impact Reinforced Concrete (RC) pier behavior and failure mode.

[1]  M. P. Collins,et al.  SHEAR STRENGTH OF CIRCULAR REINFORCED CONCRETE COLUMNS , 2002 .

[2]  Yan Xiao,et al.  Seismic Shear Strength of Reinforced Concrete Columns , 1994 .

[3]  Basile G. Rabbat,et al.  Notes on ACI 318-08, building code requirements for structural concrete : with design applications , 2008 .

[4]  Stephen A. Mahin,et al.  Event-Driven Control System for Geographically Distributed Hybrid Simulation , 2006 .

[5]  A. Elnashai,et al.  ANALYTICAL AND FIELD EVIDENCE OF THE DAMAGING EFFECT OF VERTICAL EARTHQUAKE GROUND MOTION , 1996 .

[6]  Amr S. Elnashai,et al.  Analysis of the failure of interstate 10 freeway ramp during the Northridge earthquake of 17 January 1994 , 1995 .

[7]  Σταυροσ Δερμιτζακησ,et al.  DEVELOPMENT OF SUBSTRUCTURING TECHNIQUES FOR ON-LINE COMPUTER CONTROLLED SEISMIC PERFORMANCE TESTING , 1985 .

[8]  Amr S. Elnashai,et al.  TECHNICAL NOTE A FRAMEWORK FOR MULTI-SITE DISTRIBUTED SIMULATION AND APPLICATION TO COMPLEX STRUCTURAL SYSTEMS , 2005 .

[9]  Douglas A. Foutch,et al.  Dynamic behaviour of R/C highway bridges under the combined effect of vertical and horizontal earthquake motions , 1991 .

[10]  Amr S. Elnashai,et al.  Characterization of shaking intensity distribution and seismic assessment of RC buildings for the Kashmir (Pakistan) earthquake of October 2005 , 2009 .

[11]  Pierre Pegon,et al.  α-Operator splitting time integration technique for pseudodynamic testing error propagation analysis , 1997 .

[12]  Curtis J. Holub.  Interaction of Variable Axial Load and Shear Effects in RC Bridges , 2009 .

[13]  Sashi K. Kunnath,et al.  Effect of Near-Fault Vertical Ground Motions on Seismic Response of Highway Overcrossings , 2008 .

[14]  Amr S. Elnashai,et al.  Analytical Assessment of the Effect of Vertical Earthquake Motion on RC Bridge Piers , 2011 .

[15]  Amr S. Elnashai,et al.  A framework for multi-site distributed simulation and application to complex structural systems , 2012 .

[16]  D. H. Lee,et al.  Seismic Analysis of RC Bridge Columns with Flexure-Shear Interaction , 2001 .

[17]  M. V. Sivaselvan,et al.  Hybrid Seismic Response Simulation on a Geographically Distributed Bridge Model , 2008 .

[18]  Billie F. Spencer,et al.  Multi-dimensional Mixed-mode Hybrid Simulation Control and Applications , 2007 .