Design & optimization of a small wind turbine blade for operation at low wind speed

A small wind turbine blade was designed and optimized in this research paper. The blade plays an important role, because it is the most important part of the energy absorption system. Consequently, the blade has to be designed carefully to enable to absorb energy with its greatest efficiency. The main objective of this paper is to optimized blade number and selection of tip speed ratio corresponding to the solidity. The power performance of small horizontal axis wind turbines was simulated in detail using blade element momentum methods (BEM). In this paper for wind blade design various factors such as tip loss, hub loss, drag coefficient, and wake were considered. The design process includes the selection of the wind turbine type and the determination of the blade airfoil, twist angle distribution along the radius, and chord length distribution along the radius. A parametric study that will determine if the optimized values of blade twist angle and chord length create the most efficient blade geometry. Th...

[1]  Lin Wang,et al.  Optimized linearization of chord and twist angle profiles for fixed-pitch fixed-speed wind turbine blades , 2013 .

[2]  P. E. Ugwuoke,et al.  Weibull distribution-based model for prediction of wind potential in Enugu, Nigeria , 2012 .

[3]  S. Duran.  COMPUTER-AIDED DESIGN OF HORIZONTAL-AXIS WIND TURBINE BLADES , 2005 .

[4]  Nitin Tenguria,et al.  Investigation of blade performance of horizontal axis wind turbine based on blade element momentum theory (BEMT) using NACA airfoils , 2011 .

[5]  Matthew M. Duquette,et al.  Numerical Implications of Solidity and Blade Number on Rotor Performance of Horizontal-Axis Wind Turbines , 2003 .

[6]  Helge Aagaard Madsen,et al.  Optimization method for wind turbine rotors , 1999 .

[7]  Firoz Alam,et al.  Status of Power Generation by Domestic Scale Wind Turbines in Australia , 2012 .

[8]  Michele Messina,et al.  Fluid dynamics wind turbine design: Critical analysis, optimization and application of BEM theory , 2007 .

[9]  Maulana Azad,et al.  Design and Analysis of Horizontal Axis Wind Turbine Rotor , 2011 .

[10]  Hiroshi Taniguchi,et al.  Theoretical and experimental study on the aerodynamic characteristics of a horizontal axis wind turbine , 2005 .

[11]  Young-Ho Lee,et al.  Design of a low Reynolds number airfoil for small horizontal axis wind turbines , 2012 .

[12]  David Wood,et al.  The starting and low wind speed behaviour of a small horizontal axis wind turbine , 2004 .

[13]  M. Rafiuddin Ahmed,et al.  Blade design and performance testing of a small wind turbine rotor for low wind speed applications , 2013 .

[14]  Afungchui David,et al.  Optimum project for horizontal axis wind turbines ‘OPHWT’ , 2005 .

[15]  Onder Ozgener,et al.  A review of blade structures of SWTSs in the Aegean region and performance analysis , 2005 .

[16]  Michele Messina,et al.  Design and performance of a double-pitch wind turbine with non-twisted blades , 2009 .

[17]  Chi Jeng Bai,et al.  Design of 10 kW Horizontal-Axis Wind Turbine (HAWT) Blade and Aerodynamic Investigation Using Numerical Simulation , 2013 .

[18]  A. Toffolo,et al.  Optimal design of horizontal-axis wind turbines using blade-element theory and evolutionary computation , 2002 .

[19]  Ali H. Almukhtar,et al.  Effect of Drag on the Performance for an Efficient Wind Turbine Blade Design , 2012 .

[20]  Hiroyuki Hirahara,et al.  Testing basic performance of a very small wind turbine designed for multi-purposes , 2005 .

[21]  Vasilis Fthenakis,et al.  Land use and electricity generation: A life-cycle analysis , 2009 .

[22]  Thanad Katpradit,et al.  A New Design of Blade for Small Horizontal-Axis Wind Turbine with Low Wind Speed Operation , 2013 .

[23]  K. Y. Maalawi,et al.  A practical approach for selecting optimum wind rotors , 2003 .