Positioning system mass reduction due to exchange of structural stiffness by additional actuators : model studies of beam and plate systems

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers.

[1]  Yoshihiko Nakamura,et al.  Singularity-free parameterization and performance analysis of actuation redundancy , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[2]  Stephen H. Crandall,et al.  Natural Modes and Natural Frequencies of Uniform, Circular, Free-Edge Plates , 1979 .

[3]  Dara W. Childs,et al.  Turbomachinery Rotordynamics: Phenomena, Modeling, and Analysis , 1993 .

[4]  W. G. Weekers,et al.  Compensation for dynamic errors of coordinate measuring machines , 1997 .

[5]  M. S. Sivakumar,et al.  Mechanics of Solids , 2008 .

[6]  M.J. Robertson.  Transient deflection performance measures for command shapers , 2008, 2008 American Control Conference.

[7]  Thomas R. Kurfess,et al.  Implementation of a fast tool servo with repetitive control for diamond turning , 2003 .

[8]  Mlg Matthijs Boerlage,et al.  Rejection of disturbances in multivariable motion systems , 2008 .

[9]  Margaret J. Robertson,et al.  Design and Analysis of Experiments , 2006, Handbook of statistics.

[10]  S. N. Sengupta,et al.  MINIMIZATION OF RESIDUAL VIBRATIONS IN LUMPED PARAMETER POSITIONERS—A NON-TIME-OPTIMAL BANG–BANG CONTROL , 1996 .

[11]  E. Hinton,et al.  Fully stressed topological design of structures using an evolutionary procedure , 1995 .

[12]  J. Van Eijk,et al.  On the design of plate-spring mechanisms , 1985 .

[13]  Xiaodong Lu,et al.  High bandwidth fast tool servo control , 2004, Proceedings of the 2004 American Control Conference.

[14]  P. A. McKeown,et al.  The Role of Precision Engineering in Manufacturing of the Future , 1987 .

[15]  Leo L. Beranek,et al.  Noise and vibration control , 1971 .

[16]  Guanfeng Liu,et al.  Advantages and dynamics of parallel manipulators with redundant actuation , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[17]  Raymond A. de Callafon,et al.  Control-relevant Identification and Robust Motion Control of a Wafer Stage , 2002 .

[18]  Arthur G. Erdman,et al.  Modern kinematics : developments in the last forty years , 1993 .

[19]  L. Encica,et al.  Space Mapping Optimization of a Cylindrical Voice Coil Actuator , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[20]  Jahangir Rastegar,et al.  Micro/Macro or Link-Integrated Micro-actuator Manipulation—A Kinematics and Dynamics Perspective , 2007 .

[21]  A.J.A. Vandenput,et al.  Magnetically Levitated Planar Actuator With Moving Magnets , 2007, IEEE Transactions on Industry Applications.

[22]  L. Jezequel,et al.  Optimal structural design with damping constraint limitations , 1992 .

[23]  D. Soloway.  CONTROLLED MOTION IN AN ELASTIC WORLD , 2022 .

[24]  S. H. Crandall.  The role of damping in vibration theory , 1970 .

[25]  Mmpa Marc Vermeulen,et al.  Design for precision : current status and trends , 1998 .

[26]  M. Katayama,et al.  TFT-LCD technology , 1999 .

[27]  S. Krenk,et al.  Tuned mass absorbers on damped structures under random load , 2008 .

[28]  Jahangir Rastegar,et al.  A Systematic Method for Kinematics Synthesis of High-Speed Mechanisms With Optimally Integrated Smart Materials , 2002 .

[29]  Anil K. Chopra.  Modal Analysis of Linear Dynamic Systems: Physical Interpretation , 1996 .

[30]  J. G. Beliveau.  Structural dynamics for the practising engineer , 1987 .

[31]  Steen Krenk,et al.  Adaptive tuning of elasto-plastic damper , 2007 .

[32]  Mjm Marcel Renkens.  Design of an axially controlled spindle unit for high precision diamond turning , 1997 .

[33]  David Cebon,et al.  Materials Selection in Mechanical Design , 1992 .

[34]  Jan Swevers,et al.  Accurate tracking control of linear synchronous motor machine tool axes , 1996 .

[35]  Man Liu,et al.  Formulation of Rayleigh damping and its extensions , 1995 .

[36]  J. Tani,et al.  Active Vibration Control of a Cantilever Beam by a Piezoelectric Ceramic Actuator , 1989 .

[37]  Lorna J. Gibson,et al.  Failure mode maps for foam core sandwich beams , 1987 .

[38]  Mary D Waller,et al.  Vibrations of Free Elliptical Plates , 1950 .

[39]  Chuan Yang,et al.  Research on the structure of high-speed large-scale ultra-precision positioning system , 2008, 2008 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[40]  George I. N. Rozvany,et al.  Structural Design via Optimality Criteria , 1989 .

[41]  Cyril M. Harris,et al.  Shock and vibration handbook , 1976 .

[42]  Y. Xie,et al.  Evolutionary methods for topology optimisation of continuous structures with design dependent loads , 2005 .

[43]  Niels Leergaard Pedersen,et al.  An optimality criterion for shape optimization in eigenfrequency problems , 2005 .

[44]  Yoshihiko Nakamura,et al.  Dynamics computation of closed-link robot mechanisms with nonredundant and redundant actuators , 1989, IEEE Trans. Robotics Autom..

[45]  Stefano Stramigioli,et al.  Vision on Mechatronic Design , 2002 .

[46]  A. Mallik,et al.  Variational approach for singularity-free path-planning of parallel manipulators , 2003 .

[47]  Clément Gosselin,et al.  Design and analysis of kinematically redundant parallel manipulators with configurable platforms , 2005, IEEE Transactions on Robotics.

[48]  Andrew A. Goldenberg,et al.  Task space trajectory control of flexible micro-macro robot in the presence of parametric uncertainty , 1999 .

[49]  John T. Wen,et al.  Redundant actuation for improving kinematic manipulability , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[50]  Toshihiro Irie,et al.  Free Vibration of Circular Plate Elastically Supported at Some Points , 1978 .

[51]  H. Van Brussel,et al.  Robust Control of Feed Drives with Linear Motors , 1998 .

[52]  Jpmb Hans Vermeulen.  Ceramic optical diamond turning machine : design and development , 1999 .

[53]  William Singhose,et al.  Locally Linearized Dynamic Analysis of Parallel Manipulators and Application of Input Shaping to Reduce Vibrations , 2004 .

[54]  Peter H. Meckl,et al.  Controller Design Procedure for Two-Mass Systems With Single Flexible Mode , 2008 .

[55]  D. J. Ewins,et al.  Modal Testing: Theory and Practice , 1984 .

[56]  Raphael T. Haftka,et al.  Structural optimization complexity: what has Moore’s law done for us? , 2004 .

[57]  N. C. Cheung.  A new type of direct-drive variable-reluctance actuators for industrial automation , 2002, 2002 IEEE International Conference on Industrial Technology, 2002. IEEE ICIT '02..

[58]  Walter Schumacher,et al.  A mixed elastic and rigid-body dynamic model of an actuation redundant parallel robot with high-reduction gears , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[59]  Dasgupta Bhaskar,et al.  A Newton-Euler formulation for the inverse dynamics of the Stewart platform manipulator , 1998 .

[60]  Harry H. West,et al.  Analysis of structures , 1988 .

[61]  John H. Bickford,et al.  Mechanisms for intermittent motion , 1972 .

[62]  Warren P. Seering,et al.  Creating time-optimal commands for systems with denominator dynamics , 1996, Proceeding of the 1996 IEEE International Conference on Control Applications IEEE International Conference on Control Applications held together with IEEE International Symposium on Intelligent Contro.

[63]  Tatsuo Arai,et al.  Accuracy analysis of a modified Stewart platform manipulator , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[64]  D. A. Krulewich.  Handbook of actuators and edge alignment sensors , 1992 .

[65]  Robert L. Norton,et al.  Design of Machinery , 1991 .

[66]  André Preumont,et al.  Random Vibration and Spectral Analysis , 2010 .

[67]  Manfred Weck,et al.  Parallel Kinematic Machine Tools – Current State and Future Potentials , 2002 .

[68]  A. Molenaar,et al.  A novel Planar Magnetic Bearing and Motor Configuration applied in a Positioning Stage , 2000 .

[69]  E. Crawley,et al.  Use of piezoelectric actuators as elements of intelligent structures , 1987 .

[70]  M. Preiswerk,et al.  An analysis of vibration control using piezoceramics in planar flexible-linkage mechanisms , 1994 .

[71]  Eric R. Marsh,et al.  A new damper design for machine tool structures: the replicated internal viscous damper , 1994 .

[72]  Bhaskar Dasgupta,et al.  The Stewart platform manipulator: a review , 2000 .

[73]  P. Duysinx,et al.  Note on topology optimization of continuum structures including self-weight , 2005 .

[74]  J. S. Rastegar,et al.  Task-specific optimal simultaneous kinematic, dynamic, and control design of high-performance robotic systems , 1999 .

[75]  Arthur W. Leissa,et al.  Vibrations of completely free triangular plates , 1992 .

[76]  Stanley Dunkerley,et al.  On the Whirling and Vibration of Shafts , 1894 .

[77]  D. C. Hodgson,et al.  Book Review : Fundamentals of Noise and Vibration Analysis for Engineers: M.P. Norton Cambridge University Press Cambridge, UK 1989, 619 pp, $95 (hard cover) $37.50 (paperback) , 1990 .

[78]  Nicolae Lobontiu,et al.  Compliant Mechanisms: Design of Flexure Hinges , 2002 .

[79]  A. Slocum,et al.  Precision Machine Design , 1992 .

[80]  Steen Krenk,et al.  Linear control strategies for damping of flexible structures , 2006 .

[81]  Sigurd Wagner,et al.  Micromechanics of macroelectronics , 2005 .

[82]  D. J. Mead,et al.  The measurement of the loss factors of beams and plates with constrained and unconstrained damping layers: A critical assessment , 2007 .

[83]  Julian R. Wright.  An Empirical Model for Loudspeaker Motor Impedance , 1990 .

[84]  L. G. Jaeger,et al.  Dynamics of structures , 1990 .

[85]  Y. Xie,et al.  Evolutionary structural optimisation using an additive algorithm , 2000 .

[86]  Christian Brecher,et al.  Limits for controller settings with electric linear direct drives , 2001 .

[87]  Květoslav Belda,et al.  Design-by-Optimization and Control of Redundantly Actuated Parallel Kinematics Sliding Star , 2005 .

[88]  Kenneth J. Waldron,et al.  Kinematics, dynamics, and design of machinery , 1998 .

[89]  Jacques Peters.  Metrology in design and manufacturing: facts and trends , 1977 .

[90]  Christian Smith,et al.  Robot manipulators , 2009, IEEE Robotics & Automation Magazine.

[91]  Jean-Pierre Merlet,et al.  Legs interference checking of parallel robots over a given workspace or trajectory , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[92]  A. Bertram,et al.  The evolution of Hooke's law due to texture development in FCC polycrystals , 2001 .

[93]  Tsu-Chin Tsao,et al.  Dynamic variable depth of cut machining using piezoelectric actuators , 1994 .

[94]  Peter Heinrich Meckl.  Control of Vibration in Mechanical Systems Using Shaped Reference Inputs , 1988 .

[95]  Oleg Vinogradov.  Kinematic Analysis of Mechanisms , 2000 .

[96]  Ghj Guido Florussen.  Accuracy analysis of multi-axis machines by 3D length measurements , 2002 .

[97]  Reimund Neugebauer,et al.  New Approaches to Machine Structures to Overcome the Limits of Classical Parallel Structures , 2002 .

[98]  André Preumont,et al.  A six-axis single-stage active vibration isolator based on Stewart platform , 2005 .

[99]  Stuart T. Smith,et al.  Foundations of ultraprecision mechanism design , 1992 .

[100]  Sondipon Adhikari,et al.  IDENTIFICATION OF DAMPING: PART 1, VISCOUS DAMPING , 2001 .

[101]  J. Farkas.  Structural optimization as a harmony of design, fabrication and economy , 2005 .

[102]  A. Chaigne,et al.  Asymmetric non-linear forced vibrations of free-edge circular plates. Part II: Experiments , 2003 .

[103]  H. Hu,et al.  Dynamics of Controlled Mechanical Systems with Delayed Feedback , 2002 .

[104]  Hendrik Jan Coelingh.  Design support for motion control systems : a mechatronic approach , 2000 .

[105]  Tsu-Chin Tsao,et al.  Design and control of a dual stage fast tool servo for precision machining , 2004, Proceedings of the 2004 IEEE International Conference on Control Applications, 2004..

[106]  Alexander Weinmann.  Uncertain Models and Robust Control , 2002 .

[107]  T.A.M. Ruijl,et al.  Ultra Precision Coordinate Measuring Machine - Design, Calibration and Error Compensation , 2001 .

[108]  N. C. Cheung,et al.  Modelling and control of a high speed, long travel, dual voice coil actuator , 1997, Proceedings of Second International Conference on Power Electronics and Drive Systems.

[109]  Robert E. Skelton,et al.  Structural systems: a marriage of structural engineering and system science , 2002 .

[110]  Free vibrations of a circular plate with attached concentrated mass, spring and dashpot , 1967 .

[111]  Chien-Ching Ma,et al.  VIBRATION OF CRACKED CIRCULAR PLATES AT RESONANCE FREQUENCIES , 2000 .

[112]  Ahmed Abu Hanieh,et al.  Active isolation and damping of vibrations via Stewart platform , 2003 .

[113]  H. S. Tzou,et al.  Dynamics and distributed vibration controls of flexible manipulators; integrated distributed sensing and active piezoelectric actuator , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[114]  David F. Miller,et al.  Gradient-based combined structural and control optimization , 1987 .

[115]  H. G. Allen.  Analysis and design of structural sandwich panels , 1969 .

[116]  Dominiek Reynaerts,et al.  The 'true' power of SMA micro-actuation , 2001 .

[117]  C. R. Maguire.  Noise and Vibration Control in Engineering , 1959 .

[118]  George I. N. Rozvany,et al.  Layout Optimization of Structures , 1995 .

[119]  Warren P. Seering,et al.  Understanding bandwidth limitations in robot force control , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[120]  Blake Hannaford,et al.  Scaling of Direct Drive Robot Arms , 1996, Int. J. Robotics Res..

[121]  Welf-Guntram Drossel,et al.  Method for the Optimization of Kinematic and Dynamic Properties of Parallel Kinematic Machines , 2006 .

[122]  Robert G. Loewy,et al.  REVIEW ARTICLE: Recent developments in smart structures with aeronautical applications , 1997 .

[123]  Jong-Ho Park,et al.  Ultra Precision Positining System for Servo Motor-piezo Actuator Using the Dual Servo Loop and Digital Filter Implementation , 1999 .

[124]  Jean-Claude Samin,et al.  Piecewise Overactuation of Parallel Mechanisms Following Singular Trajectories: Modeling, Simulation and Control , 2004 .

[125]  Julius S. Bendat,et al.  Engineering Applications of Correlation and Spectral Analysis , 1980 .

[126]  Robert Miller.  Servomechanisms: Devices and fundamentals , 1977 .

[127]  Mouhacine Benosman,et al.  Control of flexible manipulators: A survey , 2004, Robotica.

[128]  John Vanderkooy,et al.  A Model of Loudspeaker Driver Impedance Incorporating Eddy Currents in the Pole Structure , 1989 .

[129]  John R. Airey.  The Vibrations of Circular Plates and their Relation to Bessel Functions , 1910 .

[130]  Jean-Pierre Merlet.  A Formal-Numerical Approach for Robust In-Workspace Singularity Detection , 2007, IEEE Transactions on Robotics.

[131]  Robert L. Norton.  Kinematics and Dynamics of Machinery , 2008 .

[132]  P.-K. Budig.  The application of linear motors , 2000, Proceedings IPEMC 2000. Third International Power Electronics and Motion Control Conference (IEEE Cat. No.00EX435).

[133]  J. S. Lamancusa,et al.  SOUND POWER MINIMIZATION OF CIRCULAR PLATES THROUGH DAMPING LAYER PLACEMENT , 1998 .

[134]  F. Altpeter.  Friction modeling, identification and compensation , 1999 .

[135]  J. Holterman,et al.  Active damping within an advanced microlithography system using piezoelectric Smart Discs , 2004 .

[136]  P. H. Meckl,et al.  Active Damping in a Three-Axis Robotic Manipulator , 1985 .

[137]  A. P,et al.  Mechanical Vibrations , 1948, Nature.

[138]  Jan Holterman,et al.  Vibration Control of High-precision Machines with Active Structural Elements , 2002 .

[139]  R. M. W. Sanders.  Multi-input feedforward design for vibration reduction in motion systems , 2004 .

[140]  Stuart T. Smith,et al.  Design and performance of a dual drive system for tip-tilt angular control of a 300 mm diameter mirror , 2006 .

[141]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[142]  A. Ugural,et al.  Advanced strength and applied elasticity , 1981 .

[143]  Acoustic excitation of mechatronic systems , 2005 .

[144]  B. P. Lathi.  Signal Processing And Linear Systems , 1998 .

[145]  D. B. DeBra,et al.  Vibration Isolation of Precision Machine Tools and Instruments , 1992 .

[146]  Ejc Edwin Bos.  Tactile 3D probing system for measuring MEMS with nanometer uncertainty : aspects of probing, design, manufacturing and assembly , 2008 .

[147]  Seung-Woo Kim,et al.  An ultraprecision stage for alignment of wafers in advanced microlithography , 1997 .

[148]  Daniel J. Inman,et al.  Engineering Mechanics: Dynamics , 1966 .

[149]  Nesbitt W. Hagood,et al.  Damping of structural vibrations with piezoelectric materials and passive electrical networks , 1991 .

[150]  R. Horowitz,et al.  Robust dynamic modeling and control of dual-stage actuators , 2006, IEEE Transactions on Magnetics.

[151]  F. I. Baratta.  When is a Beam a Plate , 1981 .

[152]  Arthur L. Hale,et al.  Optimal simultaneous structural and control design of maneuvering flexible spacecraft , 1985 .

[153]  Andreas Müller,et al.  Internal Preload Control of Redundantly Actuated Parallel Manipulators—Its Application to Backlash Avoiding Control , 2005, IEEE Transactions on Robotics.

[154]  T. Caughey,et al.  Classical Normal Modes in Damped Linear Dynamic Systems , 1960 .

[155]  Duane C. Hanselman,et al.  Brushless Permanent-Magnet Motor Design , 1994 .

[156]  Mary D Waller,et al.  Vibrations of Free Rectangular Plates , 1949 .

[157]  Pcjn Nick Rosielle,et al.  Design of a 3D-coordinate measuring machine for measuring small products in array , 2003 .

[158]  Joseph A. Main,et al.  Efficiency and tuning of viscous dampers on discrete systems , 2005 .

[159]  Jorge Angeles,et al.  Force optimization in redundantly-actuated closed kinematic chains , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[160]  W. S. Trimmer,et al.  Actuators for micro robots , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[161]  Byung Man Kwak,et al.  Optimization of Boundary Conditions for Maximum Fundamental Frequency of Vibrating Structures , 1993 .

[162]  J Juraj Makarovic.  Lightweight positioning : design and optimization of an actuator with two controlled degrees of freedom , 2006 .

[163]  L. W. Tsai,et al.  Robot Analysis: The Mechanics of Serial and Parallel Ma-nipulators , 1999 .

[164]  Nicolaas Bernardus Roozen,et al.  Active Structural Damping in high-precision equipment , 2006 .

[165]  Dannis Michel Brouwer.  Design principles for six degrees-of-freedom MEMS-based precision manipulators , 2007 .

[166]  M. Waller.  Vibrations of free plates: line symmetry; corresponding modes , 1952, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[167]  J. B. Bryan.  CommentThe benefits of brute strength , 1980 .

[168]  Jim Woodhouse,et al.  LINEAR DAMPING MODELS FOR STRUCTURAL VIBRATION , 1998 .

[169]  Neville H Fletcher,et al.  Principles of Vibration and Sound , 1994 .

[170]  Clifford A. Henricksen.  Heat Transfer Mechanisms in Loudspeakers; Analysis, Measurement and Design , 1987 .

[171]  L. B.,et al.  Bessel Functions for Engineers , 1935, Nature.

[172]  Niels Olhoff,et al.  On CAD-integrated structural topology and design optimization , 1991 .

[173]  L. D. Ruzinov,et al.  Design of mechanisms by geometric transformations , 1968 .

[174]  Erdinc Sahin Conkur,et al.  Clarifying the definition of redundancy as used in robotics , 1997, Robotica.

[175]  Katsu Yamane,et al.  Parallel Dynamics Computation and H∞ Acceleration Control of Parallel Manipulators for Acceleration Display , 2005 .

[176]  R. Haftka,et al.  Elements of Structural Optimization , 1984 .

[177]  Gene F. Franklin,et al.  Feedback Control of Dynamic Systems , 1986 .

[178]  Denny K. Miu,et al.  Physical Interpretation of Transfer Function Zeros for Simple Control Systems With Mechanical Flexibilities , 1991 .

[179]  Anton van Beek,et al.  Advanced engineering design : lifetime performance and reliability , 2006 .

[180]  André Preumont,et al.  Vibration Control of Active Structures: An Introduction , 2018 .

[181]  P. Remington.  Structure-Borne Sound: Structural Vibrations and Sound Radiation at Audio Frequencies (3rd Edition) , 2005 .

[182]  Ali H. Nayfeh,et al.  Modal interaction in circular plates , 1990 .

[183]  P. Mckeown.  High Precision Manufacturing and the British Economy , 1986 .

[184]  Steven Devos.  Development of Fast, Stiff and High-Resolution Piezoelectric Motors with Integrated Bearing-Driving Functionality (Ontwikkeling van snelle en stijve piëzoelektrische motoren met een hoge resolutie en een geïntegreerde lagering-aandrijvingsfunctie) , 2006 .

[185]  N. Ganesan,et al.  DYNAMIC STUDIES ON BEAMS WITH UNCONSTRAINED LAYER DAMPING TREATMENT , 1996 .

[186]  Seung-Hi Lee,et al.  Comparative design of dual-stage actuator control systems for hard disk drives , 2001, ISIE 2001. 2001 IEEE International Symposium on Industrial Electronics Proceedings (Cat. No.01TH8570).

[187]  Y. Okazaki,et al.  Dual-servo mechanical stage for continuous positioning , 1993 .

[188]  Mp Rien Koster,et al.  Vibrations of cam mechanisms and their consequences on the design , 1973 .

[189]  Uri Kirsch,et al.  Fundamental Properties of Optimal Topologies , 1993 .

[190]  G. Boothroyd,et al.  Design for Disassembly and the Environment , 1996 .

[191]  Mmpa Marc Vermeulen.  High-precision 3D-coordinate measuring machine : design and prototype-development , 1999 .

[192]  G.J.P. Nijsse.  Linear motion systems: A modular approach for improved straightness performance , 2001 .

[193]  Sondipon Adhikari,et al.  Damping modelling using generalized proportional damping , 2006 .

[194]  B. C.,et al.  Engineering Mechanics , 1942, Nature.

[195]  Edward F. Crawley,et al.  Intelligent structures for aerospace - A technology overview and assessment , 1994 .

[196]  Dominiek Reynaerts,et al.  Scale effects and thermal considerations for micro-actuators , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).