Synthesis of Si3N4–MoSi2 in situ composite from mechanically activated (Mo+Si3N4) powders

[1]  H. Kung,et al.  Fabrication and Microstructures of MoSi2 Reinforced–Si3N4 Matrix Composites , 2005 .

[2]  T. Iizuka,et al.  Microstructures and Properties of Mo5Si3‐Particle‐Reinforced Si3N4‐Matrix Composites , 2004 .

[3]  I. Tanaka,et al.  Structure and Properties of Advanced Nitrides , 2004 .

[4]  R. Orrú,et al.  Effect of phase transformation during high energy milling on field activated synthesis of dense MoSi2 , 2003 .

[5]  B. Kieback,et al.  Effects of high energy milling on densification behaviour of Mo–Si powder mixtures during pressureless sintering , 2002 .

[6]  Xinyu Liu,et al.  Analysis of milling energy in synthesis and formation mechanisms of molybdenum disilicide by mechanical alloying , 2001 .

[7]  E. Gaffet,et al.  Mechanical activation effect on the self-sustaining combustion reaction in the Mo-Si system , 2001 .

[8]  K. Yamada,et al.  High temperature mechanical properties of Si3N4–MoSi2 and Si3N4–SiC composites with network structures of second phases , 1999 .

[9]  Shoufeng Hu,et al.  Damage processes in Si3N4 bearing material under contact loading , 1996 .

[10]  V. Boldyrev,et al.  Sequence of phase formation during mechanical alloying in the MoSi system , 1995 .

[11]  T. Chin,et al.  Synthesis of MoSi2 powder by mechanical alloying , 1995 .

[12]  E. Gaffet,et al.  Nanocrystalline MoSi2 phase formation induced by mechanically activated annealing , 1994 .

[13]  E. J. Mittemeijer,et al.  Use of the Voigt function in a single-line method for the analysis of X-ray diffraction line broadening , 1982 .

[14]  B. Yen,et al.  Synthesis and formation mechanisms of molybdenum silicides by mechanical alloying. , 1996 .