论文信息 - Alternate-Fueled Combustor-Sector Performance—Part A: Combustor Performance and Part B: Combustor Emissions

Alternate-Fueled Combustor-Sector Performance—Part A: Combustor Performance and Part B: Combustor Emissions

Alternate aviation fuels for military or commercial use are required to satisfy MIL-DTL-83133F or ASTM D 7566 standards, respectively, and are classified as “drop-in’’ fuel replacements. To satisfy legacy issues, blends to 50% alternate fuel with petroleum fuels are acceptable. Adherence to alternate fuels and fuel blends requires “smart fueling systems’’ or advanced fuel-flexible systems, including combustors and engines, without significant sacrifice in performance or emissions requirements. This paper provides preliminary performance and emissions and particulates combustor sector data. The data are for nominal inlet conditions at 225 psia and 800°F (1.551 MPa and 700 K), for synthetic-paraffinic-kerosene- (SPK-) type (Fisher-Tropsch (FT)) fuel and blends with JP-8

[1] Changlie Wey,et al. Gaseous and Particulate Emissions Results of the NASA Alternative Aviation Fuel Experiment (AAFEX) , 2010 .

[2] Robert C. Hendricks,et al. Computational Analysis of Dynamic SPK(S8)-JP8 Fueled Combustor-Sector Performance , 2010 .

[3] C. Frayne,et al. High Pressure Combustion Research at the Air Force Research Laboratory , 2001 .

[4] Yasunori Abe,et al. Sustainable Bio-Derived Synthetic Paraffinic Kerosene (Bio- SPK) Jet Fuel Flights and Engine Tests Program Results , 2009 .

[5] R. Logan,et al. Chemical characterization of the fine particle emissions from commercial aircraft engines during the Aircraft Particle Emissions eXperiment (APEX) 1 to 3. , 2009, Environmental science & technology.