Analytical computation of the optimal reference currents for MTPC/MTPA, MTPV and MTPF operation of anisotropic synchronous machines considering stator resistance and mutual inductance

The derivation of analytical solutions for the optimal reference currents during Maximum-Torque-per-Current (MTPC; or Maximum-Torque-per-Ampere (MTPA)), Maximum-Torque-per-Voltage (MTPV) and Maximum-Torque-per-Flux (MTPF) operation of anisotropic synchronous machines with non-negligible stator resistance and mutual inductance is presented. The analytical solutions allow for a direct computation of the corresponding reference currents without neglecting stator resistance and/or mutual inductance (as usually done). Numerical approximations are no longer required. The derived analytical solutions for MTPC, MTPV and MTPF operation are suitable for any anisotropic synchronous machine; even for nonlinear reluctance synchronous machines as measurement will illustrate.

[1]  Silverio Bolognani,et al.  Optimal State Reference Computation With Constrained MTPA Criterion for PM Motor Drives , 2015, IEEE Transactions on Power Electronics.

[2]  Johan Driesen,et al.  PMSM Drive Current and Voltage Limiting as a Constraint Optimal Control Problem , 2015, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[3]  Jung Hwan Ahn,et al.  Field weakening control of synchronous reluctance motor for electric power steering , 2007 .

[4]  Roberto Petrella,et al.  Feedforward Flux-Weakening Control of Surface-Mounted Permanent-Magnet Synchronous Motors Accounting for Resistive Voltage Drop , 2010, IEEE Transactions on Industrial Electronics.

[5]  David G. Dorrell,et al.  Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An Overview , 2014, IEEE Transactions on Industrial Electronics.

[6]  Christoph M. Hackl,et al.  A unified theory for optimal feedforward torque control of anisotropic synchronous machines , 2018, Int. J. Control.

[7]  Ieee Xplore.  IEEE industry applications magazine , 1995 .

[8]  C. M. Hackl,et al.  Analytical solution for the MTPV hyperbola including the stator resistance , 2016, 2016 IEEE International Conference on Industrial Technology (ICIT).

[9]  Erich Schmidt.  Synchronous reluctance machines with high-anisotropy rotors — Comparison of their operational characteristics , 2014, 2014 Australasian Universities Power Engineering Conference (AUPEC).

[10]  Maarten J. Kamper,et al.  Current control of reluctance synchronous machines with online adjustment of the controller parameters , 2016, 2016 IEEE 25th International Symposium on Industrial Electronics (ISIE).

[11]  Dr.-Ing. Dr.-Ing. h.c. Dierk Schröder.  Modellierung und Regelung von modernen Windkraftanlagen: Eine Einführung , 2015 .

[12]  Sung-Yoon Jung,et al.  Current Minimizing Torque Control of the IPMSM Using Ferrari’s Method , 2013, IEEE Transactions on Power Electronics.

[13]  João A. C. Fong,et al.  Standards for Efficiency of Electric Motors , 2011, IEEE Industry Applications Magazine.

[14]  Dianguo Xu,et al.  Maximum Efficiency Per Ampere Control of Permanent-Magnet Synchronous Machines , 2015, IEEE Transactions on Industrial Electronics.

[15]  Maarten J. Kamper,et al.  Nonlinear PI current control of reluctance synchronous machines , 2015, ArXiv.

[16]  Christoph M. Hackl,et al.  Non-identifier Based Adaptive Control in Mechatronics , 2017 .