Wettability of carbon surfaces by pure molten alkali chlorides and their penetration into a porous graphite substrate

The wettability of graphite and glassy carbon surfaces by pure molten alkali chlorides (NaCl, KCl, RbCl, CsCl) was measured by the sessile drop method. The contact angle was found to decrease with increase of the cation radius of the chloride. Using our measured and available literature data, a new, semi-empirical model is established to estimate the adhesion energy between the 20 alkali halide molten salts and graphite (or glassy carbon). The adhesion energy is found to increase with square of the radius of the cation, and the inverse of the radius of the anion of the salt. The minimum possible value for the surface energy of graphite (and glassy carbon) was found as 150 ± 30 mJ/m 2 . The critical contact angle of spontaneous penetration (infiltration) of the molten chlorides into a porous graphite substrate was found experimentally below 90 ◦ , in the interval between 31 ◦ and 58 ◦ . This is explained by the inner structure of the porous graphite.

[1]  E. E. Miller,et al.  Capillary flow phenomena and wettability in porous media: II. Dynamic flow studies , 1988 .

[2]  R. C. Hurst.  Design of high temperature metallic components : [proceedings of a seminar held at the Joint Research Centre of the Commission of the European Communities, Petten Establishment, The Netherlands] , 1984 .

[3]  B. Drevet,et al.  Wettability at high temperatures , 1999 .

[4]  R. Naslain,et al.  Wetting improvement of carbon or silicon carbide by aluminium alloys based on a K2ZrF6 surface treatment: application to composite material casting , 1989 .

[5]  S. Rhee.  Critical Surface Energies of Al2O3 and Graphite , 1972 .

[6]  K. Trumble.  Spontaneous infiltration of non-cylindrical porosity: Close-packed spheres , 1998 .

[7]  A. Godula-Jopek,et al.  Wetting of Ni and NiO by Alternative Molten Carbonate Fuel Cell Electrolytes: I. Influence of Gas Atmosphere , 1999 .

[8]  Y. Sahai,et al.  Coalescence Behavior of Aluminum Alloy Drops in Molten Salts , 1997 .

[9]  A. Kennedy,et al.  The incorporation of ceramic particles in molten aluminium and the relationship to contact angle data , 1999 .

[10]  G. Kaptay.  Modelling Interfacial Energies in Metallic Systems , 2004 .

[11]  G. Kaptay.  Interfacial Criteria for Producing Metal Matrix Composites and Ceramic Particle Stabilized Metallic Foams , 2002 .

[12]  D. Weirauch.  Technologically significant capillary phenomena in high-temperature materials processing: Examples drawn from the aluminum industry , 2005 .

[13]  I. Kinloch,et al.  A feasibility study of scaling-up the electrolytic production of carbon nanotubes in molten salts , 2002 .

[14]  X. Xi,et al.  Critical wetting angle for spontaneous liquid infiltration into orderly packed fibres or spheres , 1995, Journal of Materials Science.

[15]  H. Atkinson,et al.  Role of Surface Tension in Relation to Contact Angle in Determining Threshold Pressure for Melt Infiltration of Ceramic Powder Compacts , 1998 .

[16]  George J. Janz.  Molten Salts Handbook , 1967 .

[17]  O. Dezellus,et al.  The role of van der Waals interactions on wetting and adhesion in metal/carbon systems. , 1999 .

[18]  Y. Birol.  An improved practice to manufacture Al–Ti–B master alloys by reacting halide salts with molten aluminium , 2006 .

[19]  D. Masson,et al.  Interfacial Reactions between Aluminum Alloys and Salt Flux during Melting , 1989 .

[20]  M. Terrones,et al.  Electrolytic formation of carbon nanostructures , 1996 .

[21]  E. E. Miller,et al.  Capillary flow phenomena and wettability in porous media. I: Static characteristics , 1988 .

[22]  M. Kawase,et al.  An Electrolyte Distribution Model in Consideration of the Electrode Wetting in the Molten Carbonate Fuel Cell , 2000 .

[23]  Erika Kálmán,et al.  Atomic force microscopy investigation of electrochemically produced carbon nanotubes , 2001 .

[24]  G. Kaptay,et al.  On the asymmetrical dependence of the threshold pressure of infiltration on the wettability of the porous solid by the infiltrating liquid , 2005 .

[25]  K. Trumble,et al.  Spontaneous Infiltration of Alumina by Copper-Oxygen Alloys , 1996 .

[26]  Andrew G. Glen,et al.  APPL , 2001 .